The effect of texture on the anisotropy of thermophysical properties of additively manufactured AlSi10Mg
Source abstract
Abstract
Abstract The process of additive manufacturing (AM) has rapidly developed over the past two decades and is now addressing the needs of industry for fast production of samples with tailored properties and complex geometries. One of the most common alloys fabricated from powder using the Laser Powder Bed Fusion (L-PBF) method is AlSi10Mg. The effects of the inherent anisotropy and existing porosity in AM AlSi10Mg were investigated in terms of thermophysical properties, namely thermal conductivity, diffusivity, heat capacity and thermal expansion. These properties were measured in the two principal directions, namely parallel and perpendicular to the printing direction (i.e., in the Z- and X-directions, respectively). In both cases, the sample showed abnormal thermal expansion and conductivity, as compared to a conventionally fabricated sample. After heat treatment, macro- and microstructure analysis confirmed that thermally induced porosity (TIP) had occurred. The anisotropic behaviors of thermal conductivity, diffusivity and thermal expansion were found to be related to the texture, preferred orientation and pore distribution of the aluminum grains in the L-PBF-treated samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)10.1016/j.msea.2017.08.027 ↗
2. Kempen · 2011 · 484
3. Mechanical properties of AlSi10Mg produced by selective laser melting10.1016/j.phpro.2012.10.059 ↗
4. In-situ detection of thermally induced porosity in additively manufactured and sintered objects10.1007/s10853-019-03452-5 ↗
5. Nondestructive ultrasonic evaluation of additively manufactured AlSi10Mg samples
6. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
7. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
8. On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
9. Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture10.1016/j.jallcom.2016.08.249 ↗
10. EOS · 2014 · Vol 49
11. Microstructure evolution and thermal properties of an additively manufactured, solution treatable AlSi10Mg part
12. Standard test method for determining specific heat capacity by differential scanning
13. Standard Reference Material 720, Synthetic Sapphire (α-Al2O3). NBOS Certif. 13.
14. High-temperature heat contents of some zirconium-containing substances10.1021/ja01161a106 ↗
15. ASTM International · 2017
16. ASTM International · 2015
17. ASTM. E2585-09 · 2015
18. ASTM. E1225-13 · 2013
19. The precision determination of lattice constants by the power and rotation crystal methods and applications10.1063/1.1698520 ↗
20. Effects of grain size and texture on thermal conductivity of AZ31 during static recrystallization10.2320/matertrans.M2017126 ↗
21. Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
22. Ogris · 2002
23. Thermal expansion of aluminum and some aluminum alloys10.6028/jres.048.030 ↗
24. Influence of microstructure and heat treatment on thermal conductivity of rheocast and liquid die cast Al-6Si-2Cu-Zn alloy10.1080/13640461.2015.1125990 ↗
25. Effect of thermal annealing on microstructure evolution and mechanical behavior of an additive manufactured AlSi10Mg part10.1557/jmr.2018.82 ↗
26. High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM)
27. Thermal conductivity: experimental investigation of Effect of Porosity on Thermal Conductivity10.1111/j.1551-2916.1954.tb20108.x ↗
28. Effect of porosity on the thermal conductivity of copper processed by powder metallurgy10.1016/j.jpcs.2011.11.033 ↗
29. Touloukian · 1970
30. Touloukian · 1974
31. Electrical resistivity and thermal conductivity of pure aluminum and aluminum alloys up to and above the melting temperature10.1007/s10765-006-0144-0 ↗
32. Studies on the thermal properties of hypereutectic Al--Si alloys by using transient method
33. Thermal and electrical conductivity in Al–Si/Cu/Fe/Mg binary and ternary Al alloys10.1007/s10853-015-9115-9 ↗
34. Modeling heat conduction in the presence of a dislocation10.1016/j.ijthermalsci.2012.12.013 ↗