Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni(300) maraging steel
Source abstract
Abstract
This work investigated the microstructure evolution with aging temperature of laser-powder bed fusion (L-PBF) 18Ni(300) maraging steel at different scales. Important issues of cell structure changes, precipitation sequence, and austenite reversion were evaluated. The dominant strengthening factor in each state was elucidated based on yield strength modeling. The as built fully martensitic matrix consists of dislocation cell structures, and its yield strength comes from the martensite lath and solid solution strengthening with comparable contributions. Aged at 440 °C, the cell walls kept stable and massive ω particles prominently strengthened matrix by shearing mechanism. At 490 °C, the cell walls were partially destroyed and austenite reversion just began along the lath boundary. Densely distributed η-Ni3Ti particles produced the peak strength dominantly by the Orowan mechanism, but the shearing process may also exist meanwhile. At 540 °C, cell walls further degraded and reverted austenite formed along the lath boundaries and around some retained cell walls. Its strength decreased mildly mainly due to the wider inter-particle spacing, but was still maintained quite high by Laves-Fe2Mo and η-Ni3Ti particles via the Orowan process. The reverted austenite with limited fraction had a minor role in its strength decrease, but improved ductility significantly.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. The potential of additive manufacturing in the smart factory industrial 4.0: a review10.3390/app9183865 ↗
2. Metal additive manufacturing in the commercial aviation industry: a review10.1016/j.jmsy.2019.08.005 ↗
3. A review of metal additive manufacturing technologies10.4028/www.scientific.net/SSP.278.1 ↗
4. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
5. Additive manufacturing of steels: a review of achievements and challenges10.1007/s10853-020-05109-0 ↗
6. Mechanical behavior of additive manufactured AISI 420 martensitic stainless steel10.1016/j.msea.2019.138815 ↗
7. Design of laser parameters for selectively laser melted maraging steel based on deposited energy density
8. Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel10.1016/j.optlastec.2014.07.021 ↗
9. Microstructural characterization and properties of selective laser melted maraging steel with different build directions10.1080/14686996.2018.1527645 ↗
10. A short review on ultra-high-strength maraging steels and future perspectives10.1590/1980-5373-mr-2020-0470 ↗
11. Microstructure and mechanical properties of As-deposited and heat-treated 18Ni (350) maraging steel fabricated by gas metal arc-based wire and arc additive manufacturing10.1007/s11665-021-06102-7 ↗
12. Selective laser melting of maraging steel: mechanical properties development and its application in mold10.1108/RPJ-05-2017-0104 ↗
13. Tailoring the nanostructure of laser powder bed fusion additively manufactured maraging steel
14. Comparison of maraging steel micro- and nanostructure produced conventionally and by laser additive manufacturing
15. Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel10.1016/j.matdes.2017.11.042 ↗
16. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel
17. Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting10.1016/j.msea.2019.05.115 ↗
18. A review of factors affecting the mechanical properties of maraging steel 300 fabricated via laser powder bed fusion10.3390/met10091273 ↗
19. The effect of processing parameters and material properties on residual forces induced in Laser Powder Bed Fusion (L-PBF
20. Heat treatment behavior of the 18Ni300 maraging steel additively manufactured by selective laser melting10.4028/www.scientific.net/MSF.941.2160 ↗
21. Effect of aging treatment on microstructure and properties of additively manufactured maraging steel10.1080/03019233.2019.1651022 ↗
22. High strength X3NiCoMoTi 18-9-5 maraging steel prepared by selective laser melting from atomized powder10.3390/ma12244174 ↗
23. The ageing characteristics of an Fe-19 wt% Ni-9wt% Co-5 wt% W alloy10.1007/BF00552095 ↗
24. Precipitation in 18 wt% Ni maraging steel of grade 35010.1016/S1359-6454(99)00370-5 ↗
25. Influence of the increasing content of Mo on the precipitation phenomena occurring during tempering in the maraging alloy Fe-12Mn-9Co-5Mo10.1016/0001-6160(88)90123-X ↗
26. A comparison of the structural evolution occurring during anisothermal or isothermal treatments in the case of nickel and manganese type maraging alloys10.1007/BF00545204 ↗
27. Effects of austenite reversion during overageing on the mechanical properties of 18 Ni (350) maraging steel10.1016/j.msea.2005.03.074 ↗
28. The formation of reverted austenite in 18% Ni 350 grade maraging steel10.1023/A:1004346412079 ↗
29. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
30. Microstructural characterisation and in-situ straining of additive-manufactured X3NiCoMoTi 18-9-5 maraging steel10.1016/j.msea.2019.02.041 ↗
31. Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting10.1557/jmr.2014.204 ↗
32. Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h10.1016/j.matchar.2019.02.033 ↗
33. Precipitation reactions and strengthening behavior in 18 wt pct nickel maraging steels10.1007/BF02646061 ↗
34. Small-angle X-ray scattering investigation of the martensite unmixing in maraging alloy using synchrotron radiation10.1080/01418618708204473 ↗
35. Concurrent improvement of strength and ductility in heat-treated C300 maraging steels produced by laser powder bed fusion technique
36. Precipitation Hardening in 350 Grade Maraging Steel10.1007/BF02646522 ↗
37. Phase chemistry and precipitation reactions in maraging steels: part iv. Discussion and conclusions10.1007/BF02668193 ↗
38. Phase chemistry and precipitation reactions in maraging steels: part i. introduction and study of Co-containing C-300 steel10.1007/BF02668190 ↗
39. Aging behaviour and mechanical performance of 18-ni 300 steel processed by selective laser melting
40. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
41. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2C–5Mn)10.1016/j.msea.2011.11.009 ↗
42. Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting10.1016/j.actamat.2011.03.033 ↗
43. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
44. In-situ observation of asymmetrical deformation around inclusion in a heterogeneous additively manufactured 316L stainless steel10.1016/j.jmst.2021.02.022 ↗
45. About metastable cellular structure in additively manufactured austenitic stainless steels
46. Review on ω phase in body-centered cubic metals and alloys10.1007/s40195-013-0014-2 ↗
47. Anomalous small-angle X-ray scattering from a maraging alloy during martensite unmixing10.1080/13642818808208508 ↗
48. Nanocrystalline precipitates formed by aging of bcc disordered Fe-Ni-Mo alloys10.1103/PhysRevB.51.8830 ↗
49. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
50. The mechanisms of the fcc–bcc martensitic transformation revealed by pole figures10.1016/j.actamat.2009.10.046 ↗
51. Kinetics of reverted austenite in 18 wt% Ni grade 300 maraging steel: an in-situ synchrotron X-ray diffraction and texture study10.1007/s11837-020-04254-w ↗
52. Origin of shear induced β to ω transition in Ti–Nb-based alloys10.1016/j.actamat.2015.03.040 ↗
53. Coherent ω phase induced yield strength improvement in Ti-19Nb-1.5Mo-4Zr-8Sn alloy10.1016/j.rinp.2020.103366 ↗
54. Omega phase in materials10.1016/0079-6425(82)90002-0 ↗
55. Precipitation hardening in metals10.1179/026708399773002782 ↗
56. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
57. Understanding the factors controlling the hardness in martensitic steels10.1016/j.scriptamat.2015.08.010 ↗
58. A model for the microstructure behaviour and strength evolution in lath martensite10.1016/j.actamat.2015.07.018 ↗
59. Predicting microstructure and strength of maraging steels: Elemental optimisation10.1016/j.actamat.2016.07.020 ↗
60. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
61. Effect of aging on microstructure and mechanical properties of cobalt free 18%Ni (250 grade) maraging steel10.1179/mst.1998.14.1.1 ↗
62. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel10.1016/j.actamat.2019.08.042 ↗
63. Study of the microstructure and mechanical performance of C-X stainless steel processed by selective laser melting (SLM)10.1016/j.msea.2020.139227 ↗
64. Modeling of the yield strength of a stainless maraging steel10.1016/j.scriptamat.2009.11.020 ↗
65. Criteria for yielding of dispersion-strengthened alloys10.1016/0001-6160(60)90015-8 ↗
66. Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardening10.1016/j.actamat.2004.08.018 ↗
67. Structural, elastic and thermal properties of Laves phase Fe2Mo from first principles
68. W. Sha, H. Leitner, Z. Guo, W. Xu, Phase transformations in maraging steels, in: E. Pereloma, D.V. Edmonds (Eds.), Phase Transformations in Steels, Woodhead, 80 High Street, Sawston, Cambridge CB22 3HJ, UK, 2012, pp. 332–362, https://doi.org/10.1533/9780857096111.2.332.10.1533/9780857096111.2.332 ↗
69. Strengthening of cobalt-free 19Ni3Mo1.5Ti maraging steel through high-density and low lattice misfit nanoscale precipitates10.1016/j.msea.2017.12.109 ↗
70. Clustering, nano-scale precipitation and strengthening of steels10.1016/j.pmatsci.2020.100764 ↗
71. W. Sha, Z. Guo, Quantification of age hardening in maraging steels, in: E. Pereloma, D.V. Edmonds (Eds.), Maraging Steels, Woodhead, 80 High Street, Sawston, Cambridge CB22 3HJ, UK, 2009, pp. 109–124, https://doi.org/10.1533/9781845696931.109.10.1533/9781845696931.109 ↗