A comprehensive study on the effects of surface post-processing on fatigue performance of additively manufactured AlSi10Mg: An augmented machine learning perspective on experimental observations
Source abstract
Abstract
In this study, the efficacy of 21 distinct surface post-processing methods on the fatigue behavior of an additively manufactured (AM) material was investigated. Various treatments, encompassing single-step processes like sand blasting (SB), conventional shot peening (CSP), severe shot peening (SSP), gradient severe shot peening (GSSP), ultrasonic shot peening (USP), severe vibratory peening (SVP), ultrasonic nanocrystal surface modification (UNSM), laser shock peening (LSP), laser polishing (LP), tumble finishing (TF), chemical polishing (CP), electro-chemical polishing (ECP), and machining (M), as well as hybrid treatments, were systematically investigated for their impact on the fatigue behavior of hourglass laser powder based fused (LB-PBF) AlSi10Mg specimens. A comprehensive series of experimental tests were carried out, covering surface texture analyses, microstructural characterizations, porosity measurements, hardness, residual stresses (RS), monotonic tensile tests, and rotating bending fatigue tests at four stress levels. Following the experimental investigations, the acquired data were leveraged to develop a machine learning (ML)-based model to correlate the fatigue life with the influencing factors and conduct parametric and sensitivity analyses. The model utilized a deep learning approach to predict the fatigue response of LB-PBF AlSi10Mg, incorporating various artificial neural networks (ANNs) and considering input parameters such as yield strength, ultimate tensile strength, elongation to fracture, porosity, depth of pore closure, surface hardness, depth of hardness variation, surface RS, maximum compressive residual stresses (CRS), depth of the CRS field, top surface grain size, surface layer mean grain size, surface roughness, and stress amplitude. Depending on the life regime, the factors influencing fatigue behavior can vary significantly. In higher stresses, dominated by plastic strains, surface residual stress emerges as the primary factor. Conversely, in lower stresses, dominated by elastic strains, the significance of surface roughness becomes more pronounced, followed by surface residual stress, surface hardness and other factors. These findings underscore the contextual importance of different influencing factors for enhancing fatigue resistance based on varying loading conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Application of artificial intelligence to optimize the process parameters effects on tensile properties of Ti-6Al-4V fabricated by laser powder-bed fusion10.1007/s10999-021-09570-w ↗
3. Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components10.1007/s11665-022-06850-0 ↗
4. Feature-based volumetric defect classification in metal additive manufacturing10.1038/s41467-022-34122-x ↗
5. Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components10.1016/j.tafmec.2020.102611 ↗
6. An improved prediction of residual stresses and distortion in additive manufacturing10.1016/j.commatsci.2016.10.003 ↗
7. Fatigue performance of U-notched additively manufactured AlSi10Mg parts: The effects of chemical and thermal post-treatments
8. Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects10.1111/ffe.13000 ↗
9. Fatigue life estimation of additive manufactured parts in the as-built surface condition10.1002/mdp2.36 ↗
10. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)10.1016/j.msea.2017.08.027 ↗
11. On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
12. Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
13. Fatigue behavior and modeling of additively manufactured IN718: The effect of surface treatments and surface measurement techniques10.1016/j.jmatprotec.2021.117475 ↗
14. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
15. Surface finishing of additively manufactured Inconel 625 complex internal channels: A case study using a multi-jet hydrodynamic approach
16. Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts10.1016/j.optlastec.2020.106639 ↗
17. The efficiency of tumble finishing as a final post-treatment for fatigue enhancement of notched laser powder bed fusion AlSi10Mg10.1038/s41598-023-30660-6 ↗
18. Chemical polishing of scaffolds made of Ti-6Al-7Nb alloy by additive manufacturing10.1016/j.acme.2014.03.001 ↗
19. The effect of HF-HNO3 chemical polishing on the surface roughness and fatigue life of laser powder bed fusion produced Ti6Al4V10.1016/j.mtcomm.2020.101396 ↗
20. Effects of different mechanical and chemical surface post-treatments on mechanical and surface properties of as-built laser powder bed fusion AlSi10Mg10.1016/j.surfcoat.2022.128391 ↗
21. Fatigue performance evaluation of selective laser melted Ti-6Al-4V10.1016/j.msea.2014.01.041 ↗
22. Surface integrity of selective-laser-melted components10.1016/j.cirp.2010.03.131 ↗
23. Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts10.1016/j.ijfatigue.2017.05.008 ↗
24. Fatigue performance of additive manufactured metallic parts10.1108/13552541311302932 ↗
25. Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting10.1016/j.jmbbm.2015.06.024 ↗
26. Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing
27. Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity10.1016/j.ijfatigue.2017.10.021 ↗
28. Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade10.1016/j.cma.2017.03.005 ↗
29. Surface Shot Peening Post-processing of Inconel 718 Alloy Parts Printed by Laser Powder Bed Fusion Additive Manufacturing10.1007/s11665-021-06103-6 ↗
30. Fatigue behaviour of notched laser powder bed fusion AlSi10Mg after thermal and mechanical surface post-processing10.1016/j.msea.2021.142145 ↗
31. Application of gradient severe shot peening as a novel mechanical surface treatment on fatigue behavior of additively manufactured AlSi10Mg
32. Alharbi · Corros. Resist. 3D Print. SS316L Post-Process. Ultrason. shot Peen. Optim. Energy Lev. · 2022
33. Assessing the efficacy of several impact-based mechanical techniques on fatigue behavior of additive manufactured AlSi10Mg10.1016/j.msea.2023.144940 ↗
34. The effects of microstructural and chemical surface gradients on fatigue performance of laser powder bed fusion AlSi10Mg10.1016/j.msea.2022.142962 ↗
35. Fatigue life extension of additively manufactured Nickel-base 718 alloy by nanostructured surface10.1016/j.msea.2021.142041 ↗
36. Individual and synergistic effects of thermal and mechanical surface post-treatments on wear and corrosion behavior of laser powder bed fusion AlSi10Mg10.1016/j.jmatprotec.2021.117479 ↗
37. Controlling defects of laser-powder bed fusion processed 316L stainless steel via ultrasonic nanocrystalline surface modification10.1016/j.msea.2023.145726 ↗
38. An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces10.1016/j.matchar.2023.112907 ↗
39. On the effects of laser shock peening on fatigue behavior of V-notched AlSi10Mg manufactured by laser powder bed fusion10.1016/j.ijfatigue.2022.107035 ↗
40. Superior effects of hybrid laser shock peening and ultrasonic nanocrystalline surface modification on fatigue behavior of additive manufactured AlSi10Mg10.1016/j.surfcoat.2023.129512 ↗
41. Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting
42. A critical comparative review of cavitation peening and other surface peening methods10.1016/j.jmatprotec.2022.117586 ↗
43. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification10.1016/j.apsusc.2020.146922 ↗
44. The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V10.1016/j.matchar.2016.02.001 ↗
45. Effect of local treatment temperature of ultrasonic nanocrystalline surface modification on tribological behavior and corrosion resistance of stainless steel 316L produced by selective laser melting10.1016/j.surfcoat.2020.126080 ↗
46. Effects of hybrid post-treatments on fatigue behaviour of notched LPBF AlSi10Mg: experimental and deep learning approaches10.1016/j.prostr.2021.12.021 ↗
47. On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing10.1016/j.matdes.2018.02.055 ↗
48. Effect of surface and subsurface defects on fatigue behavior of AlSi10Mg alloy processed by laser powder bed fusion (L-PBF)
49. Hybrid thermal, mechanical and chemical surface post-treatments for improved fatigue behavior of laser powder bed fusion AlSi10Mg notched samples10.1016/j.surfcoat.2021.127962 ↗
50. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg
51. Correlation of residual stress, hardness and surface roughness with crack initiation and fatigue strength of surface treated additive manufactured AlSi10Mg: Experimental and machine learning approaches10.1016/j.jmrt.2023.03.193 ↗
52. A comprehensive review on the effect of process parameters and post-process treatments on microstructure and mechanical properties of selective laser melting of AlSi10Mg10.1016/j.jmrt.2022.09.092 ↗
53. Internal surface measurement of metal powder bed fusion parts
54. Surface texture characterization and optimization of metal additive manufacturing-produced components for aerospace applications
55. Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion
56. ISO 21920-2:2021, Geometrical product specifications (GPS) -Surface texture: Profile method: Terms, definitions and surface texture parameters, Int. Stand. ISO. (2007).
57. Surface roughness parameter and modeling for fatigue behavior of additive manufactured parts: A non-destructive data-driven approach
58. Developing a best practice for sample preparation of additive manufactured AlSi10Mg for electron backscatter diffraction analysis
59. Comparative study of crystallite size using Williamson-Hall and Debye-Scherrer plots for ZnO nanoparticles10.1088/2043-6254/ab52f7 ↗
60. EN ISO 6892-1:2009 tensile testing: Initial experience from the practical implementation of the new standard10.3139/120.110269 ↗
61. On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg10.1016/j.ijfatigue.2022.106841 ↗
62. Quantification of uncertainty in a defect-based Physics-Informed Neural Network for fatigue evaluation and insights on influencing factors10.1016/j.engfracmech.2023.109595 ↗
63. Defect criticality analysis on fatigue life of L-PBF 17-4 PH stainless steel via machine learning10.1016/j.ijfatigue.2022.107018 ↗
64. Machine learning based fatigue life prediction with effects of additive manufacturing process parameters for printed SS 316L10.1016/j.ijfatigue.2020.105941 ↗
65. Modelling fatigue life prediction of additively manufactured Ti-6Al-4V samples using machine learning approach10.1016/j.ijfatigue.2022.107483 ↗
66. Analysing the Fatigue Behaviour and Residual Stress Relaxation of Gradient Nano-structured 316L Steel Subjected to the Shot Peening via Deep Learning Approach
67. Using deep neural network with small dataset to predict material defects10.1016/j.matdes.2018.11.060 ↗
68. Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientations10.1016/j.ijfatigue.2020.105737 ↗
69. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
70. Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
71. Laser Polishing of Nickel-Titanium Shape Memory Alloy Produced via Laser Powder Bed Fusion10.1007/s12540-023-01432-8 ↗
72. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
73. Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: Effect of building direction
74. Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
75. CO2 laser polishing of laser-powder bed fusion produced AlSi10Mg parts10.1016/j.surfcoat.2021.127291 ↗
76. Laser polishing of selective laser melted components10.1016/j.ijmachtools.2015.05.002 ↗
77. The deformation and ageing of mild steel: III Discussion of results10.1088/0370-1301/64/9/303 ↗
78. Defects and anomalies in powder bed fusion metal additive manufacturing10.1016/j.cossms.2021.100974 ↗
79. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
80. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg10.1016/j.actamat.2020.10.001 ↗
81. Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel10.1016/j.surfcoat.2018.02.081 ↗
82. Surface layer nanocrystallization of carbon steels subjected to severe shot peening: Analysis and optimization10.1016/j.matchar.2019.109877 ↗
83. The Effect of Grain Size on Fatigue Growth of Short Cracks10.1007/BF02654397 ↗
84. Fatigue behavior prediction and analysis of shot peened mild carbon steels10.1016/j.ijfatigue.2018.06.004 ↗