journal article·2023-04

Laser powder bed fusion in-situ alloying of refractory WTa alloy and its microstructure and mechanical properties

Junfeng Li, Yunxiao Wu, Lingfeng Xue, Zhengying Wei

Publisher page

Abstract

Refractory tungsten-tantalum (WTa) alloy material was prepared by laser powder bed fusion (LPBF) in-situ alloying, and the direct fabrication of WTa complex parts with good appearance and structural integrity was realized. The interior defects, phase composition, microstructure and mechanical properties of LPBF-deposited WTa alloy were investigated. The preferential combination of Ta and oxygen (O) produces an oxygen-trapping effect, which can reduce the segregation of O at the grain boundary, thereby improving the grain boundary strength and effectively suppressing the generation of intergranular cracks. The W-Ta solid solution phase was formed in LPBF-deposited WTa alloy. The solidified grains of the horizontal (XOY) and vertical (XOZ) sections are mainly striped grains with an average size of 5.18 µm and upwardly grown columnar grains with an average size of 6.43 µm, respectively. The grains of LPBF-deposited WTa alloy specimens are finer than those of LPBF-deposited W specimens. Inside the solidified grains, cellular structures with a size of around 1 µm were formed in XOY section. In the XOZ section, the transition from columnar/elongated structures at the bottom of the molten pool to fine cellular structures at the top of the molten pool was formed as a result of the varies in temperature gradients (G) and solidification rates (R). The maximum microhardness of the LPBF-deposited WTa alloy was 454.28HV0.5. The compression test showed that the ultimate compressive strength (UCS) was 1393 MPa, exhibiting a transgranular fracture mode. This study demonstrates the feasibility of in-situ fabrication of complex parts of refractory tungsten-tantalum alloy materials by LPBF.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: microstructure and properties
2. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗
3. Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments10.1080/17452759.2020.1779999 ↗
4. Laser powder bed fusion of ultra-high-strength 420 stainless steel: microstructure characterization, texture evolution and mechanical properties10.1016/j.msea.2021.140790 ↗
5. Effect of process parameters on the Selective Laser Melting (SLM) of tungsten10.1016/j.ijrmhm.2017.11.035 ↗
6. Microstructure tailoring to enhance strength and ductility in pure tantalum processed by selective laser melting10.1016/j.msea.2020.139352 ↗
7. Effect of neutron irradiation on rhenium cluster formation in tungsten and tungsten-rhenium alloys10.1016/j.jnucmat.2018.04.031 ↗
8. Manufacturing of tungsten and tungsten composites for fusion application via different routes10.1007/s42864-019-00011-y ↗
9. Processing of complex near-net-shaped tungsten parts by PIM10.1016/j.nme.2018.05.023 ↗
10. High-density tungsten fabricated by selective laser melting: Densification, microstructure, mechanical and thermal performance10.1016/j.optlastec.2019.03.018 ↗
11. Laser powder bed fusion of pure tungsten: effects of process parameters on morphology, densification, microstructure10.3390/ma14010165 ↗
12. Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties10.1080/14686996.2018.1455154 ↗
13. Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten10.1016/j.ijrmhm.2018.10.004 ↗
14. Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties
15. Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation10.1016/j.actamat.2020.04.060 ↗
16. Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000℃10.1016/j.nme.2019.02.034 ↗
17. Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys10.1016/j.msea.2017.10.080 ↗
18. A prospect of using ternary W-5wt% V-5wt% Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material10.1016/j.jallcom.2022.163899 ↗
19. Effect of processing parameters on microstructure and properties of tungsten heavy alloys fabricated by SLM10.1016/j.ijrmhm.2019.03.020 ↗
20. Densification, microstructure and properties of 90W–7Ni-3Fe fabricated by selective laser melting10.3390/met9080884 ↗
21. Microstructure and mechanical properties of W-10 wt% Ta alloys prepared by spark plasma sintering10.1080/02670836.2021.2024947 ↗
22. Microstructure and mechanical property of a novel ReMoTaW high-entropy alloy with high density10.1016/j.ijrmhm.2018.05.006 ↗
23. The effect of tantalum (Ta) doping on mechanical properties of tungsten (W): a first-principles study10.1557/jmr.2016.358 ↗
24. A prospect of using ternary W-5 wt% V-5 wt% Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material10.1016/j.jallcom.2022.163899 ↗
25. Cracking in laser additively manufactured W: Initiation mechanism and a suppression approach by alloying10.1016/j.matdes.2018.12.010 ↗
26. Preparation, microstructure, and microhardness of selective laser-melted W–3Ta sample10.1557/jmr.2020.71 ↗
27. Additive manufacturing of W-12Ta
28. Effects of laser scanning strategies on selective laser melting of pure tungsten10.1088/2631-7990/ab7b00 ↗
29. Selective laser melting and remelting of pure tungsten10.1002/adem.201901352 ↗
30. Effect of Ta on the microstructure and mechanical properties of WTa alloys prepared by arc melting10.1016/j.matchar.2022.111823 ↗
31. Effects of tantalum concentration on the microstructures and mechanical properties of tungsten-tantalum alloys10.1016/j.fusengdes.2017.04.082 ↗
32. Effect of reinforcement phase on the mechanical property of tungsten nanocomposite synthesized by spark plasma sintering10.1016/j.ijrmhm.2015.07.009 ↗
33. Balling phenomena in selective laser melted tungsten10.1016/j.jmatprotec.2015.02.032 ↗
34. Grain boundary segregation engineering in as-sintered molybdenum for improved ductility10.1016/j.scriptamat.2018.07.008 ↗
35. Embrittlement of copper due to segregation of oxygen to grain boundaries10.1007/BF02648354 ↗
36. Solving oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering10.1016/j.mattod.2022.02.006 ↗
37. Controlling crack formation and porosity in laser powder bed fusion: alloy design and process optimization
38. Fabrication and mechanical properties of powder metallurgy tantalum prepared by hot isostatic pressing10.1016/j.ijrmhm.2014.09.012 ↗
39. Sutrisna. Influence of alloying elements, in-situ dispersoids and fabrication on microstructure and properties of W-(Ta, V, Ti) ODS
40. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
41. Microstructure and strength of selectively laser melted AlSi10Mg10.1016/j.actamat.2016.07.012 ↗