Characterization of topology optimized Ti-6Al-4V components using electron beam powder bed fusion
Source abstract
Abstract
Abstract The use of manufacturing to generate topology optimized components shows promise for designers. However, designers who assume that additive manufacturing follows traditional manufacturing techniques may be misled due to the nuances in specific techniques. Since commercial topology optimization software tools are neither designed to consider orientation of the parts nor large variations in properties, the goal of this research is to evaluate the limitations of an existing commercial topology optimization software (i.e. Inspire®) using electron beam powder bed fusion (i.e. Arcam®) to produce optimized Ti-6Al-4V alloy components. Emerging qualification tools from Oak Ridge National Laboratory including in-situ near-infrared imaging and log file data analysis were used to rationalize the final performance of components. While the weight savings of each optimized part exceeded the initial criteria, the failure loads and locations proved instrumental in providing insight to additive manufacturing with topology optimization. This research has shown the need for a comprehensive understanding of correlations between geometry, additive manufacturing processing conditions, defect generation, and microstructure for characterization of complex components such as those designed by topology optimization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. The limits of economy in material in frame structures10.1080/14786440409463229 ↗
2. Soil mechanics and plastic analysis for limit design10.1090/qam/48291 ↗
3. Bendsoe · 2004
4. Bendsoe · 1995
5. Gibson · 2010
6. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
7. S. Tripathy, Topology optimization for additive manufacturing applications, Internet Article Accessed on 10, January 2017, http://blogs.3ds.com/simulia/topology-optimization-for-additive-manufacturing-applications/.
8. Topology optimization for additive manufacturing
9. Additive manufacturing: Toward holistic design10.1016/j.scriptamat.2017.02.029 ↗
10. Role of anisotropic properties on topology optimization of additive manufactured load bearing structures10.1016/j.scriptamat.2016.10.021 ↗
11. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
12. Additive manufacturing of metallic components by selective electron beam melting–a review10.1080/09506608.2016.1176289 ↗
13. Effect of microstructure and defects on fatigue behavior of LENS deposited Ti-6Al-4V10.1179/1362171815Y.0000000050 ↗
14. Review on powder based electron beam additive manufacturing technology
15. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
16. Modeling of laser additive manufacturing process
17. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: part I: microstructural characterization10.1007/s11661-004-0094-8 ↗
18. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: part II: thermal modelling10.1007/s11661-004-0095-7 ↗
19. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
20. Fabrication and microstructural characterization of additively manufactured Ti-6Al-4V parts by electron beam melting10.1080/17452759.2015.1008643 ↗
21. A microstructure model for laser processing of Ti-6Al-4V
22. Site-specific control of crystallographic grain orientation through electron beam additive manufacturing10.1179/1743284714Y.0000000734 ↗
23. Thermographic microstructure monitoring in electron beam additive manufacturing10.1038/srep43554 ↗
24. Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing10.1016/j.actamat.2016.03.063 ↗
25. Nucleation and growth of chimney pores during electron-beam additive manufacturing10.1007/s10853-016-0631-z ↗
26. Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
27. Powder bed charging during electron-beam additive manufacturing10.1016/j.actamat.2016.11.012 ↗
28. Falcon: visual analysis of large, irregularly sampled and multivariate time series data in additive manufacturing10.1016/j.cag.2017.02.005 ↗
29. Calibrating IR cameras for In-Situ temperature measurement during the electron beam melt processing of inconel 718 and Ti-Al6-V4
30. Automated In-situ defect detection and geometry validation on the ARCAM Q10 system
31. Microstructure evolution during laser additive manufacturing of Ti-6Al-4V alloys
32. Effects of heat treatments on microstructure and properties of Ti-6Al-4ZV ELI Alloy fabricated by electron beam melting (EBM)10.1016/j.msea.2017.01.019 ↗
33. Microstructural modification of Ti-6Al-4V by using an in-situ printed heat sink in electron beam melting (EBM)10.1016/j.jmatprotec.2015.07.006 ↗
34. Al-Bermani · Metall. Mat. Trans. A · 2010 · 41 · 342210.1007/s11661-010-0397-x ↗
35. Support structure constrained topology optimization for additive manufacturing10.1016/j.cad.2016.08.006 ↗
36. A new level-set based approach to shape and topology optimization under geometric uncertainty10.1007/s00158-011-0660-9 ↗
37. An efficient and scalable approach for generating topologically optimized cellular structures for additive manufacturing
38. 1994