Non-destructive simulation of node defects in additively manufactured lattice structures
Source abstract
Abstract
Abstract Additive Manufacturing (AM), commonly referred to as 3D printing, offers the ability to not only fabricate geometrically complex lattice structures but parts in which lattice topologies in-fill volumes bounded by complex surface geometries. However, current AM processes produce defects on the strut and node elements which make up the lattice structure. This creates an inherent difference between the as-designed and as-fabricated geometries, which negatively affects predictions (via numerical simulation) of the lattice’s mechanical performance. Although experimental and numerical analysis of an AM lattice’s bulk structure, unit cell and struts have been performed, there exists almost no research data on the mechanical response of the individual as-manufactured lattice node elements. This research proposes a methodology that, for the first time, allows non-destructive quantification of the mechanical response of node elements within an as-manufactured lattice structure. A custom-developed tool is used to extract and classify each individual node geometry from micro-computed tomography scans of an AM fabricated lattice. Voxel-based finite element meshes are generated for numerical simulation and the mechanical response distribution is compared to that of the idealised computer-aided design model. The method demonstrates compatibility with Uncertainty Quantification methods that provide opportunities for efficient prediction of a population of nodal responses from sampled data. Overall, the non-destructive and automated nature of the node extraction and response evaluation is promising for its application in qualification and certification of additively manufactured lattice structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Gibson · 1999
2. SLM lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
3. Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing10.1016/j.finel.2017.09.005 ↗
4. Multifunctional heat exchangers derived from three-dimensional micro-lattice structures10.1016/j.ijheatmasstransfer.2012.01.011 ↗
5. Design of multifunctional lattice-frame materials for compact heat exchangers10.1016/j.ijheatmasstransfer.2017.07.073 ↗
6. A numerical study of auxetic composite panels under blast loadings10.1016/j.compstruct.2015.09.038 ↗
7. Three-dimensional modelling of auxetic sandwich panels for localised impact resistance10.1177/1099636215618539 ↗
8. Triply periodic minimal surfaces sandwich structures subjected to shock impact
9. Additive biomanufacturing of scaffolds for breast reconstruction
10. Lattice structure design and optimization with additive manufacturing constraints10.1109/TASE.2017.2685643 ↗
11. Additively manufactured porous metallic biomaterials10.1039/C9TB00420C ↗
12. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique10.1016/j.biomaterials.2008.05.032 ↗
13. Selective laser melting‐produced porous titanium scaffolds regenerate bone in critical size cortical bone defects10.1002/jor.22293 ↗
14. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: a state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility10.1016/j.msec.2017.02.094 ↗
15. Experimental and numerical assessment of surface roughness for Ti6Al4V lattice elements in selective laser melting10.1007/s00170-019-04092-4 ↗
16. Buckminster Fuller’s “tensegrity” structures and Clerk Maxwell’s rules for the construction of stiff frames10.1016/0020-7683(78)90052-5 ↗
17. Foam topology: bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
18. L. on the calculation of the equilibrium and stiffness of frames10.1080/14786446408643668 ↗
19. Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behavior10.1016/j.rcim.2017.06.006 ↗
20. Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure10.1016/j.jmbbm.2019.06.021 ↗
21. Comparison of single Ti6Al4V struts made using selective laser melting and electron beam melting subject to part orientation10.3390/met7030091 ↗
22. Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)
23. Review of defects in lattice structures manufactured by powder bed fusion
24. Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes10.1016/j.matdes.2018.06.010 ↗
25. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗
26. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting10.1016/j.actamat.2016.02.029 ↗
27. Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting10.1016/j.jmbbm.2017.11.044 ↗
28. Mechanical performance and fatigue life prediction of lattice structures: parametric computational approach10.1016/j.compstruct.2019.111821 ↗
29. An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting10.1016/j.jmatprotec.2019.116367 ↗
30. X-ray microcomputed tomography in additive manufacturing: a review of the current technology and applications10.1089/3dp.2018.0060 ↗
31. Beautiful and functional: a review of biomimetic design in additive manufacturing
32. Bioinspired functionally graded gyroid sandwich panel subjected to impulsive loadings10.1016/j.compositesb.2020.107773 ↗
33. Principles of computerized tomographic imaging10.1118/1.1455742 ↗
34. Quantitative X-ray tomography10.1179/1743280413Y.0000000023 ↗
35. Industrial applications of computed tomography10.1016/j.cirp.2014.05.011 ↗
36. Not all scans are equal: X-ray tomography image quality evaluation10.1016/j.mtcomm.2019.100792 ↗
37. ASTM · 2011
38. Laboratory X-ray tomography for metal additive manufacturing: round robin test
39. Evaluation of topology-optimized lattice structures manufactured via selective laser melting10.1016/j.matdes.2018.01.023 ↗
40. Ti6Al4V lightweight lattice structures manufactured by laser powder bed fusion for load-bearing applications10.1016/j.optlastec.2018.07.050 ↗
41. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches10.1016/j.actamat.2018.08.030 ↗
42. On localization in ductile materials containing spherical voids10.1007/BF00015686 ↗
43. Two-scale study of the fracture of an aluminum foam by X-ray tomography and finite element modeling10.1016/j.matdes.2017.02.009 ↗
44. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique10.1016/j.ijmecsci.2012.12.004 ↗
45. Finite element modeling concepts and linear analyses of 3D regular open cell structures10.1007/s10853-005-5020-y ↗
46. Assessment of factors influencing finite element vertebral model predictions10.1115/1.2800791 ↗
47. Schwer · 2009
48. Just-in-time design and additive manufacture of patient-specific medical implants10.1016/j.phpro.2016.08.002 ↗
49. A validated finite element analysis procedure for porous structures10.1016/j.matdes.2020.108546 ↗
50. Towards stiffness prediction of cellular structures made by electron beam melting (EBM)10.1179/1743290114Y.0000000093 ↗
51. Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting
52. Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis10.1016/j.matdes.2019.107685 ↗
53. Effect of polygon order on additively manufactured lattice structures: a method for defining the threshold resolution for lattice geometry10.1007/s00170-019-04168-1 ↗
54. Additive manufacturing processes and materials for metallic microlattice structures using selective laser melting, electron beam melting and binder jetting
55. Investigation on the static response and failure process of metallic open lattice cellular structures10.1111/j.1475-1305.2008.00498.x ↗
56. Static behavior of lattice structures produced via direct metal laser sintering technology10.1016/j.matdes.2017.09.003 ↗
57. A Monte Carlo simulation-based approach to realistic modelling of additively manufactured lattice structures
58. Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting10.1016/j.jmps.2017.07.003 ↗
59. Determination of the effective elastic properties of titanium lattice structures
60. On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting10.1016/j.ijfatigue.2019.03.019 ↗
61. Programmatic lattice generation for additive manufacture
62. Threshold selection based on a simple image statistic10.1016/0734-189X(85)90093-3 ↗
63. Image-based geometrical characterisation of nodes in 3D printed lattice structures
64. Bowman · 1997 · Vol. 18
65. Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting10.1016/j.actamat.2019.09.042 ↗