Growth and properties of multi-layer nano CrAlN/TiAlN composite coating on the cermets with CrFeCoNiMo, CrFeCoNiMn, CrFeCoNiAl high entropy alloy phase
Source abstract
Abstract
Abstract In the work, multi-layer nano CrAlN/TiAlN composite coating was deposited on the cermets with CrFeCoNiMo, CrFeCoNiMn, CrFeCoNiAl high entropy alloy phase. Growth and properties of the coating were systematically investigated. The results showed that CrAlN, TiAlN and Ti(C,N) possessed same crystal plane spacing as well as diffraction angles. Thus, higher possibility for crystallization of CrAlN (2 0 0), TiAlN (2 0 0) plane on Ti(C,N) phase were obtained rather than on the binder phase. For cermets with CrFeCoNiAl, little white binder phase and smallest grains attributed to the densest and thinnest coatings on the cermets with CrFeCoNiAl. TEM revealed that columnar CrAlN monolayer exhibited a thickness of 23.4 nm and TiAlN showed thickness of 1.2 nm. Crystal planes of (0–2 0) for CrAlN was exactly parallel to (0–2 0) of core-rim phase, showing an epitaxial growth characteristic. The domain-matching epitaxy took place when the CrAlN layer was deposited on the Ti(C,N) phase, where lattice planes matched across the interface to release the mismatch strain. Besides, the multi-layer nano CrAlN/TiAlN coating deposited on the cermets with CrFeCoNiAl achieved the highest average nano-hardness of 33.4 Gpa, Young’s modulus of 445.3 Gpa and best adhesion strength of 68.11 N due to the dense and smooth coating microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.02.059 ↗
3. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
6. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
7. Development and application of tool wear: a review of the characterization of TiC-based cermets with different binders10.1016/j.cej.2014.06.078 ↗
8. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet – a review10.1016/j.matdes.2014.10.081 ↗
9. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
10. Kinetics of high-temperature oxidation of (Ti, Ta)(C, N)-based cermets10.1016/j.corsci.2015.10.006 ↗
11. Synthesis and mechanical properties of TiCx and Ti(C, N) reinforced Titanium matrix in situ composites by reactive spark plasma sintering10.1016/j.msea.2019.05.021 ↗
12. Mechanical characterization of Ti(C, N)-based cermets fabricated through different colloidal processing routes10.1016/j.jallcom.2017.10.274 ↗
13. Fabrication and properties of Ti(C, N)-based cermets with multi-component AlCoCrFeNi high-entropy alloys binder10.1016/j.matlet.2013.08.087 ↗
14. G. Zhu, Y. Liu, J.W. Ye, Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder, Int. J. Refract. Metals Hard Mater.
15. The microstructure and properties of novel Ti(C, N)-based cermets with multi-component CoCrFeNiCu high-entropy alloy binders10.1016/j.msea.2019.138345 ↗
16. Relationship of microstructure, mechanical properties and hardened steel cutting performance of TiSiN-based nanocomposite coated tool10.1016/j.jmapro.2017.07.007 ↗
17. Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings10.1016/j.surfcoat.2011.10.029 ↗
18. Preparation and characterization of CrAlN/TiAlSiN nano-multilayers by cathodic vacuum arc10.1016/j.surfcoat.2015.01.023 ↗
19. Nanostructured and mechanical properties of high-entropy alloy nitride films prepared by magnetron sputtering at different substrate temperatures10.1080/10667857.2018.1557411 ↗
20. Characteristics of (TiAlCrNbY)C films deposited by reactive magnetron sputtering10.1016/j.surfcoat.2011.09.033 ↗
21. Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys10.1016/j.jallcom.2013.08.176 ↗
22. Predictive multiphase evolution in Al-containing high-entropy alloys
23. Effects of Mo on microstructure and mechanical properties of Fe2Ni2CrMox eutectic high entropy alloys10.1016/j.matchemphys.2020.124175 ↗
24. Grain growth and the HallePetch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
25. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
26. Effect of graphite size on the tribological behavior of Ti (C, N)-based cermets self-mated wear pairs10.1016/j.ijrmhm.2017.01.014 ↗
27. Communications: formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
28. Ti(C, N)-based cermets: critical review of achievements and recent developments10.4028/www.scientific.net/SSP.274.53 ↗
29. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
30. Ultrafine TiB2-TiNiFeCrCoAl high-entropy alloy composite with enhanced mechanical properties10.1016/j.msea.2017.07.008 ↗
31. Yeh · Adv. Eng. Mater. · 2004 · 6 · 29910.1002/adem.200300567 ↗
32. Reactive-sputter-deposited TiN films on glass substrates10.1016/0040-6090(91)90225-M ↗
33. Substrate effects on the micro/nanomechanical properties of TiN coatings10.1007/s11249-004-8099-4 ↗
34. Crystallinity, morphology and microstructure of chemical vapor deposited carbon films on different substrates10.1016/S0040-6090(94)06500-4 ↗
35. Effect of substrate material on the crystallinity and epitaxy of Pb(Zr, Ti)O 3 thin films10.1016/S0040-6090(98)01727-1 ↗
36. Investigation on microstructures and mechanical properties of AlCrN coatings deposited on the surface of plasma nitrocarburized cool-work tool steels10.1016/j.vacuum.2015.08.021 ↗
37. Air-oxidation of nano-multilayered CrAlSiN thin films between 800 and 1000°C10.1016/j.surfcoat.2008.10.011 ↗