journal article·2020-08

An evolutionary design approach to shell-infill structures

Wenke Qiu, Peng Jin, Shaomeng Jin, Chuang Wang, Liang Xia, Jihong Zhu, Tielin Shi

Publisher page

Abstract

Abstract Shell-infill structures with internal porous architecture are increasingly used in additive manufacturing because of their advantages such as material saving, printing efficiency, and thermal stress release. The study is built upon the bi-directional evolutionary structural optimization (BESO) method. An evolutionary design approach to shell-infill structures using flexible control of the infill architecture is proposed in this study. Specifically, the general structural configuration with a coating shell is first designed by assuming that the infill consists of a weak material. The delicate fine infill architecture is subsequently designed by extending BESO to consider the maximum length scale constraints of the infill architecture. Shell-infill designs of variant functionally graded infill architectures are additively manufactured using stereolithography and their mechanical performance are tested. Numerical and experimental results indicate that the proposed method is more effective in providing shell-infill designs with optimal stiffness and robust performance compared to conventional designs with uniform lattice infill.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. The material bone: structure-mechanical function relations10.1146/annurev.matsci.28.1.271 ↗
2. Resilient 3D hierarchical architected metamaterials10.1073/pnas.1509120112 ↗
3. The conflicts between strength and toughness10.1038/nmat3115 ↗
4. Heterogeneously tempered martensitic high strength steel by selective laser melting and its micro-lattice: processing, microstructure, superior performance and mechanisms10.1016/j.matdes.2019.107881 ↗
5. Additive manufacturing — a review of 4D printing and future applications
6. Beautiful and functional: A. Review of biomimetic design in additive manufacturing
7. Coupling lattice structure topology optimization with design-dependent feature evolution for additive manufactured heat conduction design10.1016/j.cma.2017.12.024 ↗
8. Concurrent lattice infill with feature evolution optimization for additive manufactured heat conduction design10.1007/s00158-018-1905-7 ↗
9. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: a review10.1016/j.rser.2018.03.109 ↗
10. Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing
11. Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process10.1016/j.matdes.2019.107786 ↗
12. Review on design and structural optimisation in additive manufacturing: towards next-generation lightweight structures10.1016/j.matdes.2019.108164 ↗
13. Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials
14. Design of graded lattice structure with optimized mesostructures for additive manufacturing10.1016/j.matdes.2018.01.011 ↗
15. Compressive properties of functionally graded lattice structures manufactured by selective laser melting10.1016/j.matdes.2017.06.006 ↗
16. Compatibility in microstructural optimization for additive manufacturing
17. Topology optimization of functionally graded cellular materials10.1007/s10853-012-6905-1 ↗
18. Optimisation of functionally graded lattice structures using isostatic lines10.1016/j.matdes.2017.04.082 ↗
19. Design and optimization of conforming lattice structures
20. A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing
21. Stress-constrained shell-lattice infill structural optimisation for additive manufacturing
22. Hip implant design with three-dimensional porous architecture of optimized graded density10.1115/1.4041208 ↗
23. Current and future trends in topology optimization for additive manufacturing10.1007/s00158-018-1994-3 ↗
24. From topology optimization design to additive manufacturing: today’s success and tomorrow’s roadmap
25. Topology optimization of coated structures and material interface problems10.1016/j.cma.2015.02.011 ↗
26. Topology optimization of 3D shell structures with porous infill10.1007/s10409-017-0679-2 ↗
27. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
28. Infill optimization for additive manufacturing-approaching bone-like porous structures10.1109/TVCG.2017.2655523 ↗
29. Minimum compliance topology optimization of shell–infill composites for additive manufacturing10.1016/j.cma.2017.08.018 ↗
30. Concurrent topology optimization design of material and structure within FE2 nonlinear multiscale analysis framework10.1016/j.cma.2014.05.022 ↗
31. Multiscale structural topology optimization with an approximate constitutive model for local material microstructure10.1016/j.cma.2014.12.018 ↗
32. Recent advances on topology optimization of multiscale nonlinear structures10.1007/s11831-016-9170-7 ↗
33. Achieving minimum length scale in topology optimization using nodal design variables and projection functions10.1002/nme.1064 ↗
34. Minimum length scale in topology optimization by geometric constraints10.1016/j.cma.2015.05.003 ↗
35. Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima10.1007/BF01214002 ↗
36. Filters in topology optimization10.1002/nme.116 ↗
37. Imposing maximum length scale in topology optimization10.1007/s00158-008-0250-7 ↗
38. A penalty function for enforcing maximum length scale criterion in topology optimization
39. Projection-based two-phase minimum and maximum length scale control in topology optimization10.1007/s00158-018-2066-4 ↗
40. An explicit length scale control approach in SIMP-based topology optimization10.1016/j.cma.2014.08.027 ↗
41. Explicit feature control in structural topology optimization via level set method10.1016/j.cma.2014.01.010 ↗
42. Constraints of distance from boundary to skeleton: for the control of length scale in level set based structural topology optimization10.1016/j.cma.2015.07.015 ↗
43. Bi-directional evolutionary structural optimization on advanced structures and materials: a comprehensive review10.1007/s11831-016-9203-2 ↗
44. A discrete level-set topology optimization code written in Matlab10.1007/s00158-009-0430-0 ↗
45. Topology optimization of continuum structures with local stress constraints10.1002/(SICI)1097-0207(19981230)43:8<1453::AID-NME480>3.0.CO;2-2 ↗
46. Stress-based topology optimization using bi-directional evolutionary structural optimization method10.1016/j.cma.2018.01.035 ↗
47. Evolutionary topology optimization of continuum structures with an additional displacement constraint10.1007/s00158-009-0382-4 ↗
48. Evolutionary topology optimization of continuum structures with stress constraints10.1007/s00158-018-2090-4 ↗
49. Evolutionary topology optimization of continuum structures with smooth boundary representation10.1007/s00158-017-1846-6 ↗