Fabrication of 3D printed nanocomposites with electrospun nanofiber interleaves
Source abstract
Abstract
The incorporation of nanomaterials into polymer melts has been widely studied in recent years with the aim of improving the mechanical properties of 3D printed products. But it is still challenging, due to the poor dispersion of additives and the difficult processability of the resulting high-viscosity material. Here, we propose a novel fabrication process to enhance the mechanical properties of the 3D printed structure, and to overcome the above-mentioned issues. It is a method based on fused filament fabrication 3D printing with the application of nanofiber interleaves. We used poly (lactide acid) (PLA) both for producing nanofibers by electrospinning and for preparing 3D printing filaments by extrusion. The nanofiber mat (interleave) was placed between two printed layers during the printing process. We systematically studied the morphology of nanofibers at the interlaminar interface and found that nozzle temperature was the essential parameter that affected the adhesion between the nanofiber interleaves and the printed layers. We varied nanofiber content to study its effect on the mechanical properties of nanocomposites. With the integration of nanofibers, nanocomposites obtained improvements in storage modulus and tensile strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Combination of 3D printing and injection molding: overmolding and overprinting10.3144/expresspolymlett.2019.77 ↗
2. Enhancing aerospace engineering students’ learning with 3D printing wind‐tunnel models10.1108/13552541111156522 ↗
3. Nanotechnology impact on the automotive industry10.2174/187221050803141027101058 ↗
4. Use of 3D printing by museums: educational exhibits, artifact education, and artifact restoration10.1089/3dp.2015.0030 ↗
5. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
6. Preparation of polypropylene/glass fiber composite with high performance through interfacial crystallization10.1002/vnl.21514 ↗
7. Thermal annealing of polymer nanocomposites via photothermal heating: effects on crystallinity and spherulite morphology10.1021/ma401855v ↗
8. Incorporating crosslinks in fused filament fabrication: molecular insight into post deposition reactions
9. Fiber reinforcement during 3D printing10.1016/j.matlet.2014.10.065 ↗
10. Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing10.1016/j.matdes.2016.04.045 ↗
11. Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling10.1016/j.compositesb.2017.11.018 ↗
12. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing10.1016/j.jmatprotec.2016.07.025 ↗
13. Lowly loaded carbon nanotubes induced high electrical conductivity and giant magnetoresistance in ethylene/1-octene copolymers10.1016/j.polymer.2016.09.056 ↗
14. Mechanically strong, electrically conductive, and biocompatible graphene paper10.1002/adma.200800757 ↗
15. Thermal percolation behavior of graphene nanoplatelets/polyphenylene sulfide thermal conductivity composites10.1002/pc.22756 ↗
16. Ideal dielectric thermally conductive bismaleimide nanocomposites filled with polyhedral oligomeric silsesquioxane functionalized nanosized boron nitride10.1039/C6RA04513H ↗
17. Highly oriented carbon fiber–polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
18. Effects of processing conditions on short TLCP fiber reinforced FDM parts10.1108/13552549810197514 ↗
19. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites10.1016/j.compositesa.2016.05.032 ↗
20. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation10.1038/srep23058 ↗
21. 3D printing of polymer matrix composites: a review and prospective10.1016/j.compositesb.2016.11.034 ↗
22. Compressibility of carbon fabrics with needleless electrospun PAN nanofibrous interleaves10.3144/expresspolymlett.2016.4 ↗
23. Electrospun nanofibers as reinforcement for composite laminates materials – a review10.1016/j.compstruct.2017.09.021 ↗
24. Electrospinning based all-nano composite materials: recent achievements and perspectives10.1016/j.coco.2018.09.005 ↗
25. Electrospun nanofiber reinforced composites: a review10.1039/C8PY00378E ↗
26. Superior mechanical enhancement of epoxy composites reinforced by polyimide nanofibers via a vacuum-assisted hot-pressing10.1016/j.compscitech.2019.02.012 ↗
27. Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures: effect of the interleave morphology10.1016/j.compscitech.2016.09.024 ↗
28. Piezoelectric PAN/BaTiO3 nanofiber membranes sensor for structural health monitoring of real-time damage detection in composite
29. Hybrid multi-scale basalt fiber-epoxy composite laminate reinforced with Electrospun polyurethane nanofibers containing carbon nanotubes10.1007/s12221-014-1295-4 ↗
30. Improvement of the mode I interlaminar fracture toughness of carbon fiber composite reinforced with electrospun nylon nanofiber10.1016/j.compositesb.2019.01.065 ↗
31. Alumina reinforced nanofibers used for exceeding improvement in mechanical properties of the laminated carbon/epoxy composite10.1016/j.tafmec.2018.05.001 ↗
32. Nanofiber–sheathed structure for enhancing interfacial properties of basalt fiber-reinforced composites
33. Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating10.1126/sciadv.1700262 ↗
34. Loong-Tak Lim · 2010
35. Design of biodegradable bio-based equilibrium modified atmosphere packaging (EMAP) for fresh fruits and vegetables by using micro-perforated poly-lactic acid (PLA) films10.1016/j.postharvbio.2015.09.022 ↗
36. Advanced textile technology for fabrication of ramie fiber PLA composites with enhanced mechanical properties10.1016/j.indcrop.2021.113312 ↗
37. Failure mechanisms in unidirectional self-reinforced biobased composites based on high stiffness PLA fibres10.1016/j.compositesa.2018.11.018 ↗
38. Thermomechanical properties of highly transparent self-reinforced polylactide composites with electrospun stereocomplex polylactide nanofibers10.1016/j.polymer.2018.08.018 ↗
39. Self-reinforced polymeric materials: a review10.1016/j.progpolymsci.2010.07.002 ↗
40. Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters10.1016/j.apsusc.2017.01.112 ↗
41. Stabilization of electrospun nanofiber mats used for filters by 3D printing10.3390/polym11101618 ↗
42. Electrospinning on 3D printed polymers for mechanically stabilized filter composites10.3390/polym11122034 ↗
43. 3D printed and electrospun, transparent, hierarchical polylactic acid mask nanoporous filter10.18063/ijb.v6i4.278 ↗
44. Three-dimensional printing and electrospinning dual-scale polycaprolactone scaffolds with low-density and oriented fibers to promote cell alignment, 3D print
45. The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing10.1002/polb.24333 ↗
46. Multivariable methods applied to FTIR: a powerful technique to highlight architectural changes in poly(lactic acid)10.1016/j.polymertesting.2017.12.003 ↗
47. Influence of melt-draw ratio on the crystalline behaviour of a polylactic acid cast film with a chi structure10.1039/C7RA05422J ↗
48. Interfacial improvements in poly(3-hydroxybutyrate)-flax fibre composites with hydrogen bonding additives10.1016/j.compscitech.2003.10.012 ↗
49. Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices10.1177/0892705711423291 ↗
50. Strain-induced enthalpy relaxation in poly(lactic acid)10.1021/ma901880a ↗
51. Effects of hot airflow on macromolecular orientation and crystallinity of melt electrospun poly(L-lactic acid) fibers10.1016/j.matlet.2016.04.070 ↗
52. Biocomposites from polylactic acid and bacterial cellulose nanofibers obtained by mechanical treatment
53. Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly(lactic) acid-based filament for 3D printing