Thin films of polymer blends deposited by matrix-assisted pulsed laser evaporation: Effects of blending ratios
Source abstract
Abstract
In this work, we show successful use of matrix-assisted pulsed laser evaporation (MAPLE) for obtaining thin films of PEG:PLGA blends, in the view of their use for controlled drug delivery. In particular, we investigate the influence of the blending ratios on the characteristics of the films. We show that the roughness of the polymeric films is affected by the ratio of each polymer within the blend. In addition, we perform Fourier transformed infrared spectroscopy (FTIR) measurements and we find that the intensities ratios of the infrared absorption bands of the two polymers are consistent with the blending ratios. Finally, we assess the optical constants of the polymeric films by spectroscopic ellipsometry (SE). We point out that the blending ratios exert an influence on the optical characteristics of the films and we validate the SE results by atomic force microscopy and UV–vis spectrophotometry. In all, we stress that the ratios in which the two polymers are blended have significant impact on the morphology, chemical structure and optical characteristics of the polymeric films deposited by MAPLE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Advanced Sensor Technologies Research · Phase Equilibria and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Enhancing drug function10.1126/science.1083625 ↗
2. Advances in biomaterials, drug delivery, and bionanotechnology10.1002/aic.690491202 ↗
3. Yeon Kim · 2005
4. Controlled intraocular delivery of ganciclovir with use of biodegradable scleral implant in rabbits10.1016/0168-3659(95)00074-I ↗
5. Implantable biodegradable polymeric device in the treatment of experimental proliferative vitreoretinopathy10.3109/02713689509003758 ↗
6. Biodegradable scleral implant for intravitreal controlled release of fluconazole10.1076/ceyr.16.9.930.5042 ↗
7. Biodegradable scleral implant for intravitreal controlled release of ganciclovir10.1007/s004170050031 ↗
8. Polymer blends for controlled release coatings10.1016/j.jconrel.2007.09.012 ↗
9. Chim · J. Appl. Polym. Sci. · 2000 · 77 · 22610.1002/(SICI)1097-4628(20000705)77:1<226::AID-APP29>3.0.CO;2-8 ↗
10. Biocompatible polymer blends of poly(d,l-lactic acid-co-glycolid acid) and triblock PCL-PDMS-PCL copolymers: their characterizations and degradations
11. Controlled drug release through carboxymethyl-chitosan/polymer blend films10.1002/pen.20823 ↗
12. Fifty:fifty poly (dl glycolic acid–lactic acid) copolymer as a drug delivery system for 5-fluorouracil: a histopathological evaluation
13. Polymer blend implant for ocular delivery of fluorometholone10.1248/bpb.21.72 ↗
14. Growth of organic thin films by the matrix assisted pulsed laser evaporation (MAPLE) technique10.1016/S0257-8972(99)00376-X ↗
15. Laser deposition of polymer and biomaterial films10.1021/cr010428w ↗
16. Laser processing of soft materials
17. Thin films of polymer blends for controlled drug delivery deposited by matrix-assisted pulsed laser evaporation10.1063/1.3453756 ↗
18. Biomaterial thin film deposition and characterization by means of MAPLE technique10.1016/j.msec.2006.12.005 ↗
19. Pulsed laser deposition vs. matrix assisted pulsed laser evaporation for growth of biodegradable polymer thin films10.1007/s00339-004-2994-2 ↗
20. Surafce characteristics of PLA and PLGA films10.1016/j.apsusc.2006.05.047 ↗
21. The effect of the matrix on film properties in matrix-assisted pulsed laser evaporation10.1063/1.1427138 ↗
22. Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation10.1063/1.367101 ↗
23. Fujiwara · 2007
24. Cauchy · Bull. Des. Sci. Math. · 1930 · 14
25. Tompkins · 1999
26. Refractive index dispersion functions of solid-phase polymers by multicolor optical diffraction10.1063/1.1318940 ↗
27. Design of protein-releasing chitosan channels10.1021/bp070352a ↗
28. Femtosecond filamentary modifications in bulk polymer materials10.1134/S1054660X09020285 ↗
29. Thickness dependence of structural relaxation in spin-cast, glassy polymer thin films10.1103/PhysRevE.70.051805 ↗
30. Elucidating the balance between metal ion complexation and polymer conformation in maleimide vinyl ether polymer multilayer structures10.1039/b103251h ↗
31. Simple conjugated polymer nanoparticles as biological labels10.1098/rspa.2009.0181 ↗
32. Comparison of the chain length dependence of the singlet- and triplet-excited states of oligofluorenes10.1016/j.cplett.2005.06.039 ↗
33. Synthesis and characterization of amphiphilic phenylene ethynylene oligomers and their Langmuir–Blodgett Films10.1021/la060914k ↗