Investigation of the build orientation effect on magnetic properties and Barkhausen Noise of additively manufactured maraging steel 300
Source abstract
Abstract
Abstract Additive manufacturing allows the production of complex geometries with freedom for layers construction. Build orientation causes mechanical anisotropy and may affect the crystallographic structure enabling custom-tailored properties for the product. Despite the production advantages provided by the Powder Bed Fusion (PBF) process, some inherent defects, such as porosity and residual stress need monitoring to guarantee the agreement with the material application’s requirements. Thus, this study examined the magnetic properties and the residual stress of maraging steel 300 specimens built by PBF in three build orientations (XYZ, XYZ-45, and YZX). The Rowland Ring method enabled the assessment of the static magnetization curve and the quasi-static hysteresis loop. The Barkhausen Noise (BN) characterization followed the Design of Experiments (DOE) to investigate anisotropic effects in two perpendicular directions along the surface (φ = 0° and φ = 90°). Magnetic permeability, coercivity, remanence, and power loss changed according to the build orientations used in the PBF process, and possible reasons for these changes associated with the PBF process are discussed. Moreover, residual stresses evaluated by X-ray diffraction for the three build orientations correlated to BNrms with r = 0.99 when φ = 90°. The XYZ specimen revealed a compressive stress, which also decreased the BN intensity, though XYZ-45 and YZX presented tensile residual stresses. Thus, the Barkhausen Noise could be used to inspect the residual stress of parts produced by PBF with different build orientations, improving quality management.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Effect of remelting on microstructure and magnetic properties of Fe-Co-based alloys produced by laser additive manufacturing10.1016/j.jpcs.2019.03.001 ↗
2. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges10.1063/1.4937809 ↗
3. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
4. ASTM International, 52921:2019 - Standard Terminology for Additive Manufacturing - Coordinate Systems and Test, 2019, 1–13. https://doi.org/10.1520/F2921.10.1520/F2921 ↗
5. Additive manufacturing of soft magnetic materials and components
6. Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel10.1016/j.msea.2018.07.089 ↗
7. Effect of scanning strategy on texture formation in Ni-25 at%Mo alloys fabricated by selective laser melting10.1016/j.matdes.2017.11.060 ↗
8. Magnetic shielding promotion via the control of magnetic anisotropy and thermal post processing in laser powder bed fusion processed NiFeMo-based soft magnet
9. Microstructural characterization and properties of selective laser melted maraging steel with different build directions10.1080/14686996.2018.1527645 ↗
10. Surface roughness of selective laser melted Ti-6Al-4V alloy components
11. Optimized build orientation of additive manufactured parts for improved surface quality and build time
12. Analytical evaluation of defect generation for selective laser melting of metals10.1007/s00170-019-03500-z ↗
13. Selective laser melting of maraging steel: mechanical properties development and its application in mold10.1108/RPJ-05-2017-0104 ↗
14. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
15. The achievable mechanical properties of SLM produced maraging steel 300 components10.1108/RPJ-08-2014-0096 ↗
16. M. Tu Le, J.A.P. Benitez, M. Alberteris, Future trend and applications of Barkhausen noise, in: Barkhausen Noise for Non-destructive Testing and Materials Characterization in Low Carbon Steels, 2020, 239–253.10.1016/B978-0-08-102800-1.00009-5 ↗
17. Residual stress part 1 - measurement techniques10.1179/026708301101509980 ↗
18. Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion10.1108/RPJ-06-2018-0136 ↗
19. Effect of process parameters on non-modulated Ni-Mn-Ga alloy manufactured using powder bed fusion
20. Additive manufacturing of magnetic materials
21. Additive manufacturing of magnetic materials10.1016/j.pmatsci.2020.100688 ↗
22. Controlling the grain orientation during laser powder bed fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet10.1016/j.actamat.2018.07.064 ↗
23. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
24. Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel10.1016/j.matdes.2017.11.042 ↗
25. Microstructural heterogeneity and mechanical anisotropy of 18Ni-330 maraging steel fabricated by selective laser melting: The effect of build orientation and height
26. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
27. Crystallographic features of microstructure in maraging steel fabricated by selective laser melting
28. Microstructural and residuals stress analysis of friction stir welding of X80 pipeline steel plates using magnetic Barkhausen Noise10.1007/s10921-019-0625-2 ↗
29. Barkhausen Noise analysis as an alternative method to online monitoring of milling surfaces10.1109/TMAG.2016.2514739 ↗
30. M. Zupančic, J. Grum, Magnetic micro-probe determination of the condition of maraging steel, in: proceedings of the 8th Int. Conf. Slov. Soc. Non-Destructive Test. Appl. Contemp. Non-Destructive Test. Eng. 2005, 251–260.
31. M. Deveci, Stresstech, Stresstech Bulleting 1: Barkhausen Noise Analysis, 2020, 3. https://www.stresstech.com/stresstech-bulletin-1-barkhausen-noise-analysis/ (accessed June 25, 2020).
32. Magnetic Barkhausen noise: stress-dependent mechanisms in steel10.1109/20.539144 ↗
33. M. Deveci, Stresstech, Stresstech Bulletin 2: The Properties of Barkhausen Noise, 2020, 3. https://www.stresstech.com/stresstech-bulletin-2-the-properities-of-barkhausen-noise/ (accessed June 25, 2020).
34. B.D. Cullity, C.D. Graham, Introduction to Magnetic Materials, 2008. https://doi.org/10.1002/9780470386323.10.1002/9780470386323 ↗
35. ASTM International, A751:14a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products, 2014, 6.
36. Carpenter Additive, Technical Data Sheet - CT PowderRange M300 F, 2019, 4.
37. ASTM International, B962–13 - Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, 2013, 1–7. https://doi.org/10.1520/B0962-13.2.
38. ASTM International, E8/E8M standard test methods for tension testing of metallic materials, in: Annu. B. ASTM Stand. 4, 2010, 1–27. https://doi.org/10.1520/E0008.
39. ASM International, Introduction to tensile testing, in: J.R. Davis (Ed.), Tensile Test. second ed., 2004, 1–13. https://doi.org/10.1017/CBO9781107415324.004.10.31399/asm.tb.tt2.t51060001 ↗
40. Studying magnetic fields and hysteresis with a Rowland Ring
41. Magnetic properties of matter
42. ASTM International, ASTM A596/A596M - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens, 2014, 1–8.
43. ASTM International, ASTM A773 / A773M - Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials using Hysteresigraphs, 2014, 1–12.
44. Deutsches Institut Fur Normung E.V, DIN 50460 - Determination of Magnetic Properties of Soft Magnetic Materials; General, Terminology and Principles of Measurement, 1988, 1–20.
45. Montgomery · 2008
46. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting10.1016/j.jallcom.2017.07.177 ↗
47. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
48. F.J.G. Landgraf, Manufatura aditiva de ligas metálicas: o caso das tecnologias de “ Fusão em Leito de Pó,” 2020.
49. Bozorth · 1993
50. J. Teixeira, Determination of the magnetic properties of composites based on reluctance model, in: Proceedings of the COMPUMAG 2013, Budapest, 2013.
51. Soft magnetic structural alloys for elevated- temperature applications10.1109/TMAG.1971.1067013 ↗
52. de · 2019
53. Remanence enhancement in magnetically interacting particles10.1103/PhysRevB.68.212402 ↗
54. B.E.C. Stoner, A Mechanism of Magnetic Hysteresis in Heterogeneous Alloys, 826, 1948, 599–642.10.1098/rsta.1948.0007 ↗
55. Magnetic characterization of ODS-Eurofer steel: remanent magnetization and magnetostriction behavior10.1016/j.fusengdes.2017.11.003 ↗
56. Vandenbossche · 2009
57. D.W. Garshelis, I.J. Jones, C.A. Rigsbee, D.K. Cripe, Benchtop magnetostriction measurements, in: Proceedings of the 2000 IEEE Int. Magn. Conf., IEEE, Toronto, 2000. https://doi.org/10.1109/INTMAG.2000.872265.10.1109/20.908931 ↗
58. Magnetostriction and magnetization of common high strength steels10.1109/TMAG.2009.2021531 ↗
59. The effect of residual stresses on the coercive field strength of drawn wires10.12693/APhysPolA.131.1114 ↗
60. Stress effect on coercivity of γ-Fe2O3 thin films10.1063/1.358983 ↗