journal article·2018-06Open access

Inorganic material profiling using Arn+ cluster: Can we achieve high quality profiles?

T. Conard, C. Fleischmann, R. Havelund, A. Franquet, C. Poleunis, A. Delcorte, W. Vandervorst

Abstract

Abstract Retrieving molecular information by sputtering of organic systems has been concretized in the last years due to the introduction of sputtering by large gas clusters which drastically eliminated the compound degradation during the analysis and has led to strong improvements in depth resolution. Rapidly however, a limitation was observed for heterogeneous systems where inorganic layers or structures needed to be profiled concurrently. As opposed to organic material, erosion of the inorganic layer appears very difficult and prone to many artefacts. To shed some light on these problems we investigated a simple system consisting of aluminum delta layer(s) buried in a silicon matrix in order to define the most favorable beam conditions for practical analysis. We show that counterintuitive to the small energy/atom used and unlike monoatomic ion sputtering, the information depth obtained with large cluster ions is typically very large (∼10 nm) and that this can be caused both by a large roughness development at early stages of the sputtering process and by a large mixing zone. As a consequence, a large deformation of the Al intensity profile is observed. Using sample rotation during profiling significantly improves the depth resolution while sample temperature has no significant effect. The determining parameter for high depth resolution still remains the total energy of the cluster instead of the energy per atom in the cluster.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Diamond and Carbon-based Materials Research · Nuclear Physics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Preliminary evaluation of an SF5+ polyatomic primary ion beam for analysis of organic thin films by secondary ion mass spectrometry10.1002/(SICI)1097-0231(19981015)12:19<1303::AID-RCM330>3.0.CO;2-7 ↗
2. A C-60 primary ion beam system for time of flight secondary ion mass spectrometry: Its development and secondary ion yield characteristics10.1021/ac026338o ↗
3. Dual beam depth profiling of polymer materials: comparison of C-60 and Ar cluster ion beams for sputtering10.1002/sia.5122 ↗
4. Sputtering with gas cluster-ion beams10.1142/S0218625X96001820 ↗
5. Universal equation for argon gas cluster sputtering yields10.1021/jp402684c ↗
6. Sputtering yield changes, surface movement and apparent profile shifts in SIMS depth analyses of silicon using oxygen primary ions10.1002/(SICI)1096-9918(199606)24:6<389::AID-SIA135>3.0.CO;2-L ↗
7. Modeling of bombardment induced oxidation of silicon10.1063/1.1344581 ↗
8. Molecular dynamics simulations for gas cluster ion beam processes10.1016/j.vacuum.2009.11.018 ↗
9. Influence of the composition of the altered layer on the ripple formation10.1116/1.579239 ↗
10. Damage profiles of Si (001) surface via Ar cluster beam sputtering10.1002/sia.4917 ↗
11. Evolution of nanoripples on silicon by gas cluster-ion irradiation10.1063/1.4811171 ↗
12. Improved depth resolution by sample rotation during auger-electron spectroscopy depth profiling10.1016/0040-6090(85)90269-X ↗
13. Cascade mixing limitations in sputter profiling10.1116/1.586352 ↗
14. Depth resolution of sputter profiling10.1007/BF00934407 ↗
15. Application note Cameca, http://www.cameca.com/markets/semiconductor-electronics/ultra-shallow-implant-metrology-sims (accessed 06.10.2017).
16. Gas cluster ion beam equipment and applications for surface processing10.1109/TPS.2008.927266 ↗
17. Quantitative trace metal analysis of silicon surfaces by ToFSIMS10.1002/(SICI)1096-9918(199812)26:13<984::AID-SIA446>3.0.CO;2-K ↗
18. Ultimate depth resolution and profile reconstruction in sputter profiling with AES and SIMS10.1002/1096-9918(200008)30:1<228::AID-SIA821>3.0.CO;2-E ↗
19. Determination and application of the depth resolution function in sputter profiling with secondary ion mass spectroscopy and Auger electron spectroscopy10.1116/1.581239 ↗
20. Common Data Processing System, http://www.sasj.jp/COMPRO/ (accessed 12/06/2017).
21. Room temperature migration of boron in crystalline silicon during secondary ion mass spectrometry profiling10.1116/1.2137335 ↗