Electrothermal application of novolac-derived carbon micropatterns prepared by proton beam lithography and carbonization
Source abstract
Abstract
Abstract High performance electric heaters based on carbon micropatterns (CMs), which were fabricated from a novolac resin by proton beam lithography (PBL) and carbonization, have been explored in this study. For the purpose, well-defined negative-type novolac micropatterns with crosslinked network structures were fabricated by PBL at the optimized fluence of 5 × 1015 ions cm−2 and then carbonized to form CMs. The fabricated 60–nm–thick CMs were characterized to have a high electrical conductivity of 2.12 × 102 S cm−1 and a high optical transmittance of 78%. In an application as electric heaters, the 60–nm–thick CMs showed a high maximum temperature of 141.7 °C at 60 V with an excellent heating rate of 16.06 °C s−1. Therefore, the prepared transparent electric heaters can be used in window defrosting/defogging, display, gas sensing, and medical equipment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Thickness-dependent thermal resistance of a transparent glass heater with a single-walled carbon nanotube coating10.1016/j.carbon.2010.11.012 ↗
2. Highly elastic and transparent multiwalled carbon nanotube/polydimethylsiloxane bilayer films as electric heating materials10.1016/j.matdes.2015.07.089 ↗
3. A Facile method for transparent carbon nanosheets heater based on polyimide10.1039/C6RA07457J ↗
4. Design, fabrication, and characterization of electroless Ni-P alloy films for micro heating devices10.1016/j.tsf.2013.04.136 ↗
5. Highly stretchable and transparent metal nanowire heater for wearable electronics applications10.1002/adma.201500917 ↗
6. Improvement of particle size of indium tin oxide nanoparticles by in-situ dispersion method for solution based transparent heater10.1007/s13391-017-6165-y ↗
7. Flexible transparent heaters based on silver nanotrough meshes10.1016/j.jallcom.2015.12.216 ↗
8. Transparent carbon films as electrodes in organic solar cells10.1002/ange.200704909 ↗
9. Light-weight, flexible, low-voltage electro-thermal film using graphite nanoplatelets for wearable/smart electronics and deicing devices10.1016/j.jallcom.2016.12.435 ↗
10. Flexible and transparent electrothermal film heaters based on graphene materials10.1002/smll.201101305 ↗
11. Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity10.1016/j.ijheatmasstransfer.2015.08.081 ↗
12. Large-area self-assembled reduced graphene oxide/electrochemically exfoliated graphene hybrid films for transparent electrothermal heaters10.1016/j.apsusc.2017.11.182 ↗
13. Preparation of flexible carbon nanotube ropes for low-voltage heat generator10.1063/1.4977982 ↗
14. Transparent, flexible, and highly conductive thin films based on polymer-nanotube composites10.1021/nn800858w ↗
15. High thermal conductivity graphite nanoplatelet/UHMWPE nanocomposites10.1039/C5RA03284A ↗
16. The highly conducting carbon electrodes derived from spin-coated polyacrylonitrile films10.1007/s11426-015-0453-1 ↗
17. Highly thermally conductive flame-retardant epoxy nanocomposites with reduced ignitability and excellent electrical conductivities10.1016/j.compscitech.2016.12.015 ↗
18. Ehanced transparent conductive properties of graphene/carbon nano-composite films10.1166/jnn.2013.6006 ↗
19. Carbon nonopatterns and nanoribbons from directly nanoimprinted polyacrylonitrile: correlation between crystallite orientation and nanoimprint process10.1016/j.polymer.2013.07.076 ↗
20. Simple and biocompatible micropatterning of multiple cell types on a polymer substrate by using ion implantation10.1021/la103474s ↗
21. Ion beam lithography and nanofabrication: a review10.1142/S0219581X05003139 ↗
22. Facile construction of electrically-conductive carbon patterns from a cheap coal-type pitch and their application to electic heating devices10.1016/j.jiec.2016.05.023 ↗
23. Ablative and mechanical evaluation of CNT/phenolic composites by thermal and microstructural analyses10.1016/j.compositesb.2013.12.042 ↗
24. Sub-70 nm resolution patterning of high etch-resistant epoxy novolac resins using gas permeable templates in ultraviolet nanoimprint lithography10.7567/APEX.9.056501 ↗
25. Improved thermal stabilities, ablation and mechanical properties for carbon fibers/phenolic resins laminated composites modified by silicon-containing polyborazine10.30919/es8d726 ↗
26. Dielectric thermally conductive boron nitride/polyimide composites with outstanding thermal stabilities via in-situ polymerization-electrospinning-hot press method10.1016/j.compositesa.2016.12.014 ↗
27. Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology10.1039/C8TC00452H ↗
28. Neutral particle lithography : a simpli solution to charge-related artefacts in ion beam proximity printing10.1088/0022-3727/41/2/024007 ↗
29. Preparation and properties of bisphenol-F based boron-phenolic resin/modified silicon nitride composites and their usage as binders for grinding wheels10.1016/j.apsusc.2014.12.193 ↗
30. Enhanced thermal stabilities and char yields of carbon fibers reinforced boron containing novolac phenolic resins composites10.1007/s10965-017-1338-9 ↗
31. The effect of introducing B and N on pyrolysis process of high ortho novolac resin10.3390/polym8030035 ↗
32. Low tungsten content of nanostructured material supported on carbon for the degradation of phenol10.1016/j.apcatb.2013.05.024 ↗
33. High char yield of aryl boron-containing phenolic resins: The effect of phenylboronic acid on the thermal stability and carbonization of phenolic resins10.1016/j.polymdegradstab.2013.12.011 ↗
34. Raman study of the microstructure changes of phenolic resin during pyrolysis10.1002/pc.10229 ↗
35. Fabrication and electric heating behavior of carbon thin films from water-soluble poly(vinyl alcohol) via simple dry and ambient stabilization and carbonization10.1016/j.apsusc.2018.06.187 ↗
36. Carbon formation promoted by hydrogen peroxide in supercritical water10.1016/j.carbon.2008.04.028 ↗
37. Thermal and electrical properties of poly(phenylene sulfide)/carbon nanotube nanocomposite films with a segregated structure10.1016/j.compositesa.2016.09.022 ↗
38. Transparent film heater using single-walled carbon nanotubes10.1002/adma.200701173 ↗
39. The manufacture of a transparent film heater by spinning multi-walled carbon nanotubes10.1016/j.carbon.2010.08.049 ↗
40. Enhancement of electrothermal performance in single-walled carbon nanotube transparent heaters by room temperature post treatment10.1016/j.solmat.2017.09.041 ↗