journal article·2019-07

Preparation and toughening of a-CuZr/c-ZrN nano-multilayer hard coatings

Zhenyu Guo, Dayan Ma, Xiaomin Zhang, Jingang Li, Jie Feng

Publisher page

Abstract

Abstract Hard coatings are prone to crack and failure when subjected to large external impact loads due to poor toughness. In this paper, a-CuZr/c-ZrN nanomultilayers were designed to improve the toughness of ZrN coatings. Two groups of a-CuZr/c-ZrN nanomultilayers were prepared: CuZr (10 nm)/ZrN (34, 51, 85 nm) as Group 1 and CuZr (4, 8, 16, 25 nm)/ZrN (46 nm) as Group 2. The microstructures were analyzed by Grazing incident X-ray diffraction (GIXRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM). Hardness, elastic modulus were tested by nanoindentation; scratch tests and Vickers indentation methods were adopted to characteristic the toughness. The relationship between parameters of layer structure and mechanical properties were analyzed, the toughening effect and related mechanism were investigated. The conclusions were: In Group 1, both of the hardness and fracture toughness of multilayer coatings increase with the decrease of ZrN layer thickness. In Group 2, the hardness decreases first and then increases with the CuZr thickness increases. The toughness increased with the CuZr thickness increases, especially the a-CuZr/c-ZrN = 25/46 nm has the significant toughening effect, which toughness reached 0.5468 MPa·m0.5 (about 43% higher than the ZrN single-layer film). This is mainly affected by the a-CuZr layer thickness of the multilayer film which alter the deformation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Evaluation techniques and improvements of adhesion strength for TiN coating in tool applications: a review[J]10.1080/01694243.2014.997379 ↗
2. Superlattice effect for enhanced fracture toughness of hard coatings[J]10.1016/j.scriptamat.2016.06.030 ↗
3. Toughening of hard nanostructural thin coatings: a critical review[J]10.1016/j.surfcoat.2004.10.020 ↗
4. Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness10.1063/1.339770 ↗
5. Multilayer coatings for improved performance10.1016/0257-8972(94)02407-3 ↗
6. Electrochemical corrosion and materials properties of reactively sputtered TiN/TiAlN multilayer coatings10.1016/j.ceramint.2011.07.030 ↗
7. Tuning hardness and fracture resistance of ZrN/Zr0.63Al0. 37Nnanoscale multilayers by stress-induced transformation toughening10.1016/j.actamat.2015.01.066 ↗
8. Effect of volume fraction on mechanical properties of Zr/ZrN multilayer systems10.1016/j.ceramint.2016.09.025 ↗
9. Length-scale-dependent cracking and buckling behaviors of nanostructured Cu/Cr multilayer films on compliant substrates10.1016/j.actamat.2015.08.055 ↗
10. Compressive flow behavior of Al–TiN multilayers at nanometer scale layer thickness10.1016/j.actamat.2011.02.036 ↗
11. Structure and mechanical properties of epitaxial TiN/V0. 3Nb0. 7N ((100)) superlattices10.1557/JMR.1994.1456 ↗
12. Effects of modulation periodicity on microstructure, mechanical and tribological properties of NbN/AlN nanostructured multilayer films10.1016/j.apsusc.2013.07.102 ↗
13. Investigation of hardness and fracture toughness properties of Fe/VC multilayer coatings with coherent interfaces10.1016/j.surfcoat.2016.01.025 ↗
14. Microstructure and nanoindentation hardness of TiN/AlN multilayer films prepared by pulsed laser deposition[J]10.1179/026708410X12786785573238 ↗
15. Phase composition of multilayer system TiN/CrN deposited by DC magnetron sputtering[J]
16. CrVN/TiN nanoscale multilayer coatings deposited by DC unbalanced magnetron sputtering[J]10.1016/j.surfcoat.2017.07.086 ↗
17. Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation[J]10.1016/j.actamat.2017.06.034 ↗
18. Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings10.1016/j.scriptamat.2013.01.039 ↗
19. Reversing the inverse hardness–toughness trend using W/VC multilayer coatings10.1016/j.surfcoat.2015.06.086 ↗
20. Superlattice effect for enhanced fracture toughness of hard coatings10.1016/j.scriptamat.2016.06.030 ↗
21. Annealing effect on the fracture toughness of CrN/TiN superlattices10.1016/j.ijrmhm.2017.11.008 ↗
22. Mutual promotion effect of crystal growth in TiN/SiC nanomultilayers10.1063/1.1844045 ↗
23. Template-induced crystallization of amorphous SiO2 and its effects on the mechanical properties of TiN/SiO2 nanomultilayers10.1063/1.1853512 ↗
24. Template-induced coherent growth and mechanical properties of ZrO2/TiN nano-multilayers10.1016/j.scriptamat.2008.10.019 ↗
25. Crystallization of AlON and its effects on the growth and hardness of reactively synthesized VN/AlON nanomultilayer10.1016/j.scriptamat.2006.07.056 ↗
26. Microstructure evolution and mechanical properties in VC/SiC nanomultilayers10.1016/j.apsusc.2012.06.042 ↗
27. Mechanistic coupling of dislocation and shear transformation zone plasticity in crystalline-amorphous nanolaminates[J]10.1016/j.actamat.2016.07.011 ↗
28. Superplastic-like deformation in metallic amorphous/crystalline nanolayered micropillars[J]10.1016/j.intermet.2012.03.037 ↗
29. Plastic deformation modes of CuZr/Cu multilayers
30. Transition from homogeneous-like to shear-band deformation in nanolayered crystalline Cu/amorphous Cu–Zr micropillars: intrinsic vs. extrinsic size effect[J]10.1016/j.actamat.2012.09.027 ↗
31. Approaches to investigate delamination and interfacial toughness in coated systems: an overview[J]10.1088/0022-3727/44/3/034001 ↗
32. Techniques for evaluating mechanical properties of hard coatings[J]10.1116/1.572846 ↗
33. Recent advances in hard, tough, and low friction nanocomposite coatings10.1016/S1007-0214(05)70135-8 ↗
34. Toughening of hard nanostructural thin films: acritical review10.1016/j.surfcoat.2004.10.020 ↗
35. Design and evaluation of tribological coatings10.1016/S0043-1648(00)00505-6 ↗
36. Amorphous intergranular films as toughening structural features[J]10.1016/j.actamat.2015.02.012 ↗