journal article·2022-10

Towards standardizing the preparation of test specimens made with material extrusion: Review of current techniques for tensile testing

Clara Phillips, Mark Kortschot, Fae Azhari

Publisher page

Abstract

Researchers and industries rely heavily on standardized testing methods to ensure products are designed and manufactured with high quality. With increasing use of additive manufacturing processes, such as material extrusion (MEX), there is a significant gap in material testing standards tailored for such components, and a lack of guidance on preparing appropriate test specimens with mesostructures that best represent the final part being analyzed. This paper aims to support the standardization of MEX material testing by reviewing the current methods used for preparing test specimens for tensile testing and proposing guidelines for implementation in a new standard. The need for standardization of MEX specimen preparation is addressed by analyzing the effects of slicing parameters on resulting tensile properties of the specimen. It is suggested that a standard should acknowledge these parameters, in addition to specimen geometry, toolpath optimization, printer and material specifications, so that they are appropriately selected for the test specimen by regarding the final part structure. Consideration of the proposed guidelines in a standardized method may enable comparisons between published results and support the development of MEX technology for use in advanced applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Standardization in history: a review essay with an eye to the future
2. Reviews of Standards and Related Material: Statistical Standards and ISO, Part 110.1080/08982112.2012.623956 ↗
3. W. Blum, History of ASTM Committee B-8. In: Proceedings of the Symposium on Properties, Tests, and Performance of Electrodeposited Metallic Coatings, 1957, doi:10.1520/STP46851S.10.1520/STP46851S ↗
4. Evolution of international statistical standards via life cycle of products and services10.1111/j.1751-5823.1999.tb00424.x ↗
5. K.N. Mathes, ASTM Committee D09 - A History of Success. In: Proceedings of the Symposium of Electrical Insulating Materials: International Issues, 2000, no. 1376, pp. 3–12, doi:10.1520/STP13449S.10.1520/STP13449S ↗
6. 1984
7. 1989
8. J. Moylan, ASTM D3039 Considerations for Composite Tensile Testing. Element, Oct. 22, 2021. 〈https://www.element.com/nucleus/2017/astm-d3039-testing-considerations〉 (accessed Jan. 30, 2022).
9. When is standardization slow?
10. Polymeric Materials and Properties
11. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing10.1016/j.bushor.2017.05.011 ↗
12. B. Stucker, Additive Manufacturing Technologies: Technology Introduction and Business Implications. Front. Eng. Reports Leading-Edge Eng. From 2011 Symp. Natl. Acad. Press. Washingt. DC, pp. 5–14, Sep. 2011, doi:10.17226/13274.10.17226/13274 ↗
13. Review of additive manufacturing technologies and applications in the aerospace industry
14. Additive manufacturing for the automotive industry
15. The future of additive manufacturing in sports10.1007/978-3-030-50801-2_7 ↗
16. The role of additive manufacturing for biomedical applications: a critical review10.1016/j.jmapro.2021.02.022 ↗
17. Advancing regulatory science with computational modeling for medical devices at the FDA’s office of science and engineering laboratories10.3389/fmed.2018.00241 ↗
18. Testing
19. 3D printing of fibre-reinforced thermoplastic composites using fused filament fabrication – a review10.3390/polym12102188 ↗
20. A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling10.1016/j.matdes.2016.05.078 ↗
21. ASTM International, Additive manufacturing - General principles - Fundamentals and vocabulary. ISO/ASTM 52900, 2021.
22. Additive manufacturing: challenges, trends, and applications10.1177/1687814018822880 ↗
23. Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers10.1016/j.mechatronics.2013.06.002 ↗
24. Developing and implementing 3D printing services in an academic library10.1108/LHT-05-2015-0049 ↗
25. On the difference in material structure and fatigue properties of polyamide specimens produced by fused filament fabrication and selective laser sintering10.1007/s00170-020-06026-x ↗
26. An overview of powder granulometry on feedstock and part performance in the selective laser melting process
27. A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing10.1016/j.progpolymsci.2019.03.003 ↗
28. Comparative evaluation of an open-source FDM system10.1108/RPJ-06-2012-0058 ↗
29. FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments10.3390/polym12071529 ↗
30. 3D printing of fiber-reinforced soft composites: process study and material characterization10.1016/j.jmapro.2016.04.006 ↗
31. Additively manufactured carbon fiber-reinforced composites: state of the art and perspective
32. 3D printing of polymer matrix composites: a review and prospective10.1016/j.compositesb.2016.11.034 ↗
33. Fused filament fabrication of polymer materials: a review of interlayer bond,”
34. Progress towards metal additive manufacturing standardization to support qualification and certification10.1007/s11837-017-2265-2 ↗
35. Additive manufacturing in the context of structural integrity10.1016/j.ijfatigue.2016.07.005 ↗
36. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer10.1108/RPJ-09-2014-0135 ↗
37. Scientometric review of trends on the mechanical properties of additive manufacturing and 3D printing10.1007/s11665-021-05524-7 ↗
38. Characterization of the mechanical properties of FFF structures and materials: a review on the experimental, computational and theoretical approaches10.3390/ma12060895 ↗
39. Mechanical characterization of 3D-printed polymers
40. FDM process parameters influence over the mechanical properties of polymer specimens: a review10.1016/j.polymertesting.2018.05.020 ↗
41. Additive manufacturing of polymer-based composites using fused filament fabrication (FFF): a review10.1007/s10443-021-09933-8 ↗
42. A systematic survey of FDM process parameter optimization and their influence on part characteristics
43. ASTM International, Standard Test Method for Tensile Properties of Plastics. ASTM D638–14, 2014.
44. ASTM International, Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics. ISO 527–2, 2012.
45. Experimental characterization and finite element validation of orthotropic 3D-printed polymeric parts10.1016/j.ijmecsci.2022.107095 ↗
46. Application-oriented assessment of the interlayer tensile strength of additively manufactured polymers
47. Effect of geometry on the mechanical response of additively manufactured polymer10.1016/j.polymertesting.2021.107245 ↗
48. A.M. Forster, Materials testing standards for additive manufacturing of polymer materials: state of the art and standards applicability, NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology, Gaithersburg, MD, [online], 2015, https://doi.org/10.6028/NIST.IR.8059.10.6028/NIST.IR.8059 ↗
49. Considerations on the applicability of test methods for mechanical characterization of materials manufactured by FDM10.3390/ma13010028 ↗
50. Analysis of general and specific standardization developments in additive manufacturing from a materials and technological approach10.1109/ACCESS.2020.3005021 ↗
51. Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture10.1016/j.conbuildmat.2017.04.015 ↗
52. T. Letcher, B. Rankouhi, and S. Javadpour, Experimental study of mechanical properties of additively manufactured abs plastic as a function of layer parameters. In: Proceedings of the ASME's International Mechanical Engineering Congress & Exposition, vol. 2A-2015, 2015, doi:10.1115/IMECE2015-52634.10.1115/IMECE2015-52634 ↗
53. Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance10.1016/j.polymertesting.2019.105924 ↗
54. Bond and part strength in fused deposition modeling10.1108/RPJ-03-2016-0050 ↗
55. Tensile test of additively manufactured specimens with external notch removed via laser cutting in material extrusion10.1016/j.polymertesting.2022.107581 ↗
56. Measurements of the mechanical response of unidirectional 3D-printed PLA10.1016/j.matdes.2017.03.051 ↗
57. Systematic approach for the characterization of additive manufactured and injection molded short carbon fiber-reinforced polymers under tensile loading10.3139/120.111517 ↗
58. Finite element analysis in fused deposition modeling research: A literature review10.1016/j.measurement.2021.109320 ↗
59. Design for additive manufacturing
60. Invited review article: Metal-additive manufacturing – modeling strategies for application-optimized designs
61. Beautiful and functional: a review of biomimetic design in additive manufacturing
62. Review on design and structural optimisation in additive manufacturing: towards next-generation lightweight structures10.1016/j.matdes.2019.108164 ↗
63. Finite element analysis of thermoplastic polymer extrusion 3D printed material for mechanical property prediction
64. Discussion on the microscale geometry as the dominant factor for strength anisotropy in material extrusion additive manufacturing
65. ASTM International, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. ASTM D3039, 2017.
66. M. Friday, “A Comparison of Tension Test Data Using ASTM D 638 and ISO 527,” ASTM Spec. Tech. Publ., no. 1369, pp. 35–42, 2000, doi:10.1520/STP14340S.10.1520/STP14340S ↗
67. International Organization for Standardization, “ISO/TC 261 Business Plan,” Jul. 2020. Accessed: Aug. 31, 2021. [Online]. Available: 〈https://isotc.iso.org/livelink/livelink/fetch/2000/2122/687806/ISO_TC_261__Additive_manufacturing_.pdf?nodeid=14655650&vernum=-2〉.
68. ASTM International, Additive manufacturing - General principles - Part 3 Main characteristics and corresponding test methods. ISO 17296–3, 2014.
69. ASTM International, Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies. ISO/ASTM 52921, 2019.
70. A review of current developments in process and quality control for injection molding10.1002/adv.20046 ↗
71. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
72. 2014
73. Additive manufacturing for space: status and promises10.1007/s00170-019-03786-z ↗
74. Filament materials screening for FDM 3D printing by means of injection-molded short rods10.1002/mame.201800507 ↗
75. Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M3010.1016/j.commatsci.2013.06.041 ↗
76. The influence of printing parameters on selected mechanical properties of FDM/FFF 3D-printed parts
77. Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns10.1007/s11668-016-0067-4 ↗
78. Interlayer bonding has bulk-material strength in extrusion additive manufacturing: new understanding of anisotropy
79. Guidance on the use of existing ASTM polymer testing standards for ABS parts fabricated using FFF10.1520/SSMS20190051 ↗
80. Wells D. Standardization in Additive Manufacturing: Challenges in Structural Integrity Assurance. Presented at: Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
81. Investigation of mechanical anisotropy of the fused filament fabrication process via customized tool path generation
82. Anisotropic material properties of fused deposition modeling ABS10.1108/13552540210441166 ↗
83. Effect of process parameters on tensile strength of FDM printed PLA part10.1108/RPJ-06-2017-0134 ↗
84. An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study10.1016/j.ijmecsci.2016.11.032 ↗
85. Anisotropic mechanical properties of ABS parts fabricated by fused deposition modelling10.5772/34233 ↗
86. Characterization and optimization of mechanical properties of ABS parts manufactured by the fused deposition modelling process
87. Experimental investigation of FDM process for improvement of mechanical properties and production cost10.1108/RPJ-10-2012-0091 ↗
88. Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modeling
89. Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate10.1108/RPJ-04-2013-0039 ↗
90. Effect of layer orientation on mechanical properties of rapid prototyped samples10.1080/10426910008912976 ↗
91. Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory10.1016/j.matdes.2015.11.009 ↗
92. Tensile and fatigue behavior of layered acrylonitrile butadiene styrene10.1108/RPJ-09-2013-0086 ↗
93. Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS10.3390/ma8095271 ↗
94. Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation10.1007/s11668-016-0113-2 ↗
95. Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS
96. Anisotropic mechanical performance of 3D printed polymers
97. Y. Zhang, Y.C. Yeoh, G. Zheng, and S.K. Moon, Characterization of mechanical properties of Ultem® 9085 using FDM. In: Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), (2018), pp. 451–457, doi:10.25341/D4D01W.
98. Effect of printing parameters on the mechanical properties of parts fabricated with open-source 3D printers in PLA by fused deposition modeling10.2478/mme-2018-0070 ↗
99. Effect of build orientation on the mechanical reliability of 3D printed ABS10.1108/RPJ-09-2015-0122 ↗
100. Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation10.1108/13552540110395547 ↗