Y thin films by ultrashort pulsed laser deposition for photocathode application
Source abstract
Abstract
Abstract In this work, the deposition of Y thin films by laser beams with 0.5 ps and 5 ps pulse durations at different laser fluences (1.2–6.4 J/cm2) is reported. The morphology of the deposited films and of the ablated target surface is investigated by scanning electron microscopy analyses. The present results show that the films, well adherent to the substrates, are characterized by a high abundance of sub-micrometric particulates with average size less than 0.3 μm, whose density decreases with increasing laser fluence. The formation of columnar structures observed on the target surface seems to be responsible of the poor film homogeneity. Acceptable deposition rate in the range of 0.08–0.16 A/pulse with 5 ps pulse duration is found; on the contrary with 0.5 ps pulse duration, it is not possible to get information on deposition rate as a function of the laser fluence due to the high non-uniformity of the films. A comparison with the results previously obtained in ns regime is presented and discussed. The achievements of our investigation will be useful to optimize the synthesis of photocathodes based on Y films for the production of bright electron beams in radio-frequency photoinjectors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Design and Applications · Photocathodes and Microchannel Plates · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Chrisey · 1994
2. Bäuerle · 2000
3. Highlights on photocathodes based on thin films prepared by pulsed laser deposition10.1103/PhysRevSTAB.14.090401 ↗
4. Investigation of droplet formation in pulsed Nd:YAG laser deposition of metals and silicon10.1007/s00339-010-5914-7 ↗
5. Number density and size distribution of droplets in KrF excimer laser deposited boron carbide films10.1016/j.apsusc.2005.01.092 ↗
6. Plasma deposition of n-SiO(x) nanocrystalline thin film for enhancing the performance of silicon thin film solar cells10.1016/j.tsf.2011.06.068 ↗
7. Investigation of liquid droplets, plume deflection, and a columnar structure in laser ablation of silicon10.1103/PhysRevB.73.075304 ↗
8. Reduction of droplet emission and target roughening in laser ablation and deposition of metals10.1063/1.354763 ↗
9. Electron emission characterization of Mg photocathode grown by pulsed laser deposition within an S-band rf gun10.1103/PhysRevSTAB.12.043502 ↗
10. A parametric study of Y thin films grown by multiple-pulse laser ablation10.1116/1.3563598 ↗
11. Photoemission studies of yttrium thin films10.1080/10420151003729466 ↗
12. Effect of nanoscale surface roughness on transverse energy spread from GaAs photocathodes10.1063/1.3559895 ↗
13. Detailed studies of photocathodes based on Y thin films grown by PLD technique10.1016/j.nimb.2011.04.065 ↗
14. Dynamics of the plume formation and parameters of the ejected clusters in short-pulse laser ablation10.1007/s00339-002-1818-5 ↗
15. Nanosecond field emitted and photo-field emitted current pulses from ZrC tips10.1016/j.nima.2006.06.054 ↗
16. Femtosecond pulsed-laser deposition of BaTiO310.1007/s00339-002-1958-7 ↗
17. Synthesis of nanoparticles with femtosecond laser pulses10.1103/PhysRevB.69.144119 ↗
18. Nanoparticle formation by femtosecond laser ablation10.1088/0022-3727/40/22/031 ↗
19. Development and using the field emitter as a high intensity electron source10.1016/0169-4332(95)00517-X ↗
20. Sub-picosecond UV laser ablation of metals10.1007/BF01538207 ↗
21. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗