journal article·2023-09

Organic- inorganic nanoparticle composite as an electron injection/hole blocking layer in organic light emitting diodes for large area lighting applications

Rachith Shanivarasanthe Nithyananda Kumar, Robbe Breugelmans, Xueshi Jiang, Shabnam Ahadzadeh, Guy Brammertz, Pieter Verding, Michael Daenen, Melissa Van Landeghem, Sofie Cambré, Koen Vandewal, Wim Deferme

Publisher page

Abstract

Abstract: The charge carrier balance in organic light-emitting diodes (OLEDs) is crucial for optimizing external quantum efficiency (EQE). This is typically achieved by using charge injection and blocking layers deposited by vacuum deposition, which increases the fabrication time and cost. This study investigates the potential of polyethylenimine ethoxylated (PEIE), Zinc oxide (ZnO) nanoparticles and a PEIE-ZnO nanocomposite as functional layers for OLEDs with improved electron injection and hole blocking properties fabricated by solution processing. The PEIE-ZnO nanocomposite improves OLED performance: (a) a 28 % increase in current density and enhanced electron mobility, (b) two times increase in electron mobility of the electron injection/transport layer, and (c) a reduction in surface and interface trap density. Consequently, the PEIE-ZnO nanocomposite shows an 84 % increase in electroluminescence, 52.5 % increase in luminous efficacy, 35.5 % increment in external quantum efficiency, and increased stability as measured by degradation studies. Employing these interlayers fabricated by the novel and roll-to-roll compatible Spray-on-Screen deposition technique show a comparable OLED performance as that of spin coated and vacuum deposited electron injection layers, which makes the large area fabrication of optoelectronic devices with high efficiencies, high output, low cost, and long lifetime a possible reality.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. W. Brütting, C. Adachi, Physics of Organic Semiconductors, in: W. Brütting C. Adachi (Eds.), Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2012. Doi: https://doi.org/10.1002/9783527654949.10.1002/9783527654949 ↗
2. Nearly 100% Internal Phosphorescence Efficiency in an Organic Light Emitting Device10.1063/1.1409582 ↗
3. Highly efficient phosphorescent emission from organic electroluminescent devices10.1038/25954 ↗
4. Morphological and Electronic Consequences of Modifications to the Polymer Anode “PEDOT:PSS”10.1016/j.polymer.2005.01.077 ↗
5. MoO 3 Films Spin-Coated from a Nanoparticle Suspension for Effi Cient Hole-Injection in Organic Electronics.Pdf.
6. Solution-Processed MoO 3 Thin Films as a Hole-Injection Layer for Organic Solar Cells10.1021/am200729k ↗
7. High-Efficiency Hole Extraction/Electron-Blocking Layer to Replace Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) in Bulk-Heterojunction Polymer Solar Cells10.1063/1.2834697 ↗
8. Anode Interfacial Tuning via Electron-Blocking/Hole-Transport Layers and Indium Tin Oxide Surface Treatment in Bulk-Heterojunction Organic Photovoltaic Cells10.1002/adfm.200901045 ↗
9. New Thermally Cross-Linkable Polymer and Its Application as a Hole-Transporting Layer for Solution Processed Multilayer Organic Light Emitting Diodes10.1021/cm0715500 ↗
10. Enhanced Performance of a CuPc: PCBM Based Solar Cell Using Bathocuproine BCP or Nanostructured TiO 2 as Hole-Blocking Layer
11. Role of Self-Assembled Tetraoctylammonium Bromide on Various Conjugated Polymers in Polymer Light-Emitting Diodes10.1039/C3TC31552E ↗
12. Conjugated Polyelectrolyte Hybridized ZnO Nanoparticles as a Cathode Interfacial Layer for Efficient Polymer Light-Emitting Diodes10.1002/adfm.201502360 ↗
13. Hydroxyethyl Cellulose Doped with Copper(II) Phthalocyanine-Tetrasulfonic Acid Tetrasodium Salt as an Effective Dual Functional Hole-Blocking Layer for Polymer Light-Emitting Diodes10.1016/j.optmat.2017.04.004 ↗
14. Degradation Mechanisms in Organic Light-Emitting Diodes with Polyethylenimine as a Solution-Processed Electron Injection Layer10.1021/acsami.6b15062 ↗
15. A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics10.1126/science.1218829 ↗
16. High-Efficiency Inverted Polymer Solar Cells Controlled by the Thickness of Polyethylenimine Ethoxylated (PEIE) Interfacial Layers10.1039/C4CP03484H ↗
17. Investigation of Solution-Processed Ultrathin Electron Injection Layers for Organic Light-Emitting Diodes10.1021/am500287y ↗
18. Highly Efficient Polymer Light-Emitting Devices Based on Sodium Compounds Electron Injection Layer
19. Ethoxylated Polyethylenimine as an Efficient Electron Injection Layer for Conventional and Inverted Polymer Light Emitting Diodes10.1016/j.orgel.2014.07.009 ↗
20. Hybrid White Organic Light-Emitting Diodes of Small Molecule and Polymer Emitters10.1016/j.synthmet.2012.07.013 ↗
21. Solution Processed P-Doped Hole Transport Layer for Polymer Light-Emitting Diodes10.1149/2.004203esl ↗
22. High Efficiency Solution Processed Fluorescent Yellow Organic Light-Emitting Diode through Fluorinated Alcohol Treatment at the Emissive Layer/Cathode Interface10.1088/0022-3727/47/1/015106 ↗
23. PEIE Doped ZnO as a Tunable Cathode Interlayer for Efficient Polymer Solar Cells
24. Optimization of ZnO:PEIE as an Electron Transport Layer for Flexible Organic Solar Cells10.1021/acs.energyfuels.1c00639 ↗
25. In-Depth Interfacial Engineering for Efficient Indoor Organic Photovoltaics10.1016/j.apsusc.2019.143556 ↗
26. Overall Enhanced Performance of Polymer Photodetectors by Co-Modifying ITO with PEIE and ZnO10.1002/pssr.202200117 ↗
27. High-Performance Quantum Dot-Light-Emitting Diodes with a Polyethylenimine Ethoxylated-Modified Emission Layer10.1016/j.tsf.2020.138179 ↗
28. Impacts of the Lattice Strain on Perovskite Light-Emitting Diodes
29. Outcoupling Technologies: Concepts, Simulation, and Implementation
30. Rheology and Modeling of the Spin Coating Process10.1147/rd.212.0190 ↗
31. Electrochromic Effect in Titanium Carbide MXene Thin Films Produced by Dip-Coating10.1002/adfm.201809223 ↗
32. Stable Inks for Inkjet Printing of TiO2 Thin Films10.1016/j.mssp.2018.03.015 ↗
33. Inkjet Printing of NiO Films and Integration as Hole Transporting Layers in Polymer Solar Cells
34. Towards Industrialization of Perovskite Solar Cells Using Slot Die Coating10.1039/D0TC00327A ↗
35. Spin and Doctor-Blade Coated PEDOT:PSS Back Electrodes in Inverted Organic Solar Cells10.1016/j.solener.2020.04.071 ↗
36. Effect of Screen Printing Parameters on Sensor and Actuator Performance of Dielectric Elastomer (DE) Membranes10.1016/j.sna.2017.08.028 ↗
37. Morphology, Conductivity, and Wetting Characteristics of PEDOT:PSS Thin Films Deposited by Spin and Spray Coating10.1016/j.apsusc.2015.02.128 ↗
38. Thickness Effect on Photocatalytic Activity of Tio2 Thin Films Fabricated by Ultrasonic Spray Pyrolysis10.3390/catal10091058 ↗
39. Engineering · United States Patent · 1996 · No. 19
40. I. Stephan, G. Bush, R.E. Stahley, United States Patent (19). 2000, No. 19.
41. S.J. Erickson, M.A. Us, O. Wesley, N.H. Us, M.A. Us, N.R. Faucher, (12) Patent Application Publication (10) Pub. No.: US 2008/0314314 A1. 2008, 1 (19).
42. Ultrasonic Spray Coating of Polyethylenimine (Ethoxylated) as Electron Injection and Transport Layer for Organic Light Emitting Diodes: The Influence of Layer Morphology and Thickness on the Interface Physics between Polyethylenimine (Ethoxylated) and The
43. S.N. Rachith, W. Deferme, A Method and an Apparatus for Applying Thin Film Material onto a Substrate. 21209014.6.
44. R.S. Kumar, A.V. Ramirez, P. Verding, P. Nivelle, F. Renner, J. D'Haen, Deposition of Ultra-Thin Coatings by a Nature-Inspired Spray-on-Screen Technology. Preprint 2022. Doi: https://doi.org/10.21203/rs.3.rs-2061871/v1.10.21203/rs.3.rs-2061871/v1 ↗
45. E.Y. Bormashenko, Wetting of Real Surfaces; 2013. Doi: https://doi.org/10.1515/9783110258790.10.1515/9783110258790 ↗
46. J. Breitenbach, I.V. Roisman, C. Tropea, D. Brutin, H.Y. Erbil, J.Y. Kim, I.G. Hwang, B.M. Weon, Droplet Wetting and Evaporation Droplet Wetting and Evaporation Edited By; 2018; Vol. 59.
47. Inhibition of Dewetting of Thin Polymer Films10.1016/j.pmatsci.2012.01.003 ↗
48. Interface Engineering in Organic Electronics: Energy-Level Alignment and Charge Transport10.1002/smsc.202000015 ↗
49. How to Make Ohmic Contacts to Organic Semiconductors10.1002/cphc.200300942 ↗
50. Analysis of Charge-Injection Characteristics at Electrode-Organic Interfaces: Case Study of Transition-Metal Oxides10.1103/PhysRevB.80.235325 ↗
51. High-Mobility, Trap-Free Charge Transport in Conjugated Polymer Diodes10.1038/s41467-019-10188-y ↗
52. Current Injection in Solids: The Regional Approximation Method
53. Effect of Film Thickness on the Structural, Electrical and Optical Properties of ZnO: Y Films
54. Thickness Dependence of Structural, Electrical and Optical Behaviour of Undoped ZnO Thin Films10.1016/j.physb.2008.04.045 ↗
55. Effect of Thickness on the Structural, Electrical and Optical Properties of ZnO Films10.1016/j.materresbull.2006.08.019 ↗
56. Investigation of Intrinsic Defects in Core-Shell Structured ZnO Nanocrystals10.1063/1.4725478 ↗
57. EPR and Photoluminescence Spectroscopy Studies on the Defect Structure of ZnO Nanocrystals10.1103/PhysRevB.86.014113 ↗
58. Broadband Luminescence in Defect-Engineered Electrochemically Produced Porous Si/ZnO Nanostructures10.1038/s41598-018-24684-6 ↗
59. Investigation of Luminescence and Structural Properties of ZnO Nanoparticles, Synthesized with Different Precursors10.1039/C7QM00058H ↗
60. How to Model the Behaviour of Organic Photovoltaic Cells10.1002/pi.2038 ↗
61. Energy Alignment and Surface Dipoles of Rylene Dyes Adsorbed to TiO 2 Nanoparticles10.1039/c1cp20911f ↗
62. High Open-Circuit Voltage Solid-State Dye-Sensitized Solar Cells with Organic Dye10.1021/nl901246g ↗
63. Inverted Quantum Dot Light Emitting Diodes Using Polyethylenimine Ethoxylated Modified ZnO10.1038/srep08968 ↗
64. PEIE Doped ZnO as a Tunable Cathode Interlayer for Efficient Polymer Solar Cells10.1016/j.apsusc.2018.11.166 ↗
65. Defects and Transport Properties of Metal Oxides10.1007/BF01046721 ↗
66. CsPbBr 3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells10.1002/advs.202102648 ↗
67. Trap Density Determination by Space-Charge-Limited Currents10.1063/1.1728818 ↗
68. Monolithic MAPbI3 Films for High-Efficiency Solar Cells: Via Coordination and a Heat Assisted Process10.1039/C7TA06766F ↗
69. Elucidating the Impact of Charge Selective Contact in Halide Perovskite through Impedance Spectroscopy10.1002/admi.201901193 ↗
70. Negative Capacitance Caused by Electron Injection through Interfacial States in Organic Light-Emitting Diodes10.1016/j.cplett.2006.02.060 ↗
71. Device Physics of Organic Light-Emitting Diodes Based on Molecular Materials10.1016/S1566-1199(01)00009-X ↗
72. Capacitance-Voltage Characterization of Polymer Light-Emitting Diodes
73. Capacitance-Voltage Characteristics of Organic Light-Emitting Diodes Varying the Cathode Metal: Implications for Interfacial States10.1103/PhysRevB.75.085316 ↗
74. Langevin and Trap-Assisted Recombination in Phosphorescent Organic Light Emitting Diodes10.1002/adfm.201303453 ↗
75. G. Brammertz, T. Kohl, J. de Wild, D.G. Buldu, G. Birant, M. Meuris, J. Poortmans, B. Vermang, Bias-Dependent Admittance Spectroscopy of Thin-Film Solar Cells: Experiment and Simulation. IEEE J. Photovoltaics 2020, 1-11.10.1109/JPHOTOV.2020.2992350 ↗
76. Charge Injection and Accumulation in Organic Light-Emitting Diode with PEDOT:PSS Anode10.1063/1.4918556 ↗
77. Toward Well-Defined Metal-Polymer Interfaces: Temperature-Controlled Suppression of Subsurface Diffusion and Reaction at the Calcium/Poly(3- Hexylthiophene) Interface10.1021/ja104029r ↗
78. Formation of the Calcium/Poly(3-Hexylthiophene) Interface: Structure and Energetics10.1021/ja904844c ↗
79. Calcium Thin Film Growth on Polyfluorenes: Interface Structure and Energetics10.1021/jp4105954 ↗
80. Origin of Gap States in the Electron Transport Layer of Organic Solar Cells10.1039/c2ta01061e ↗
81. Improved PEDOT:PSS/c-Si Hybrid Solar Cell Using Inverted Structure and Effective Passivation
82. Al-, Ga-, Mg-, or Li-Doped Zinc Oxide Nanoparticles as Electron Transport Layers for Quantum Dot Light-Emitting Diodes10.1038/s41598-020-64263-2 ↗
83. Structural and Optical Properties of ZnO Nanoparticles Prepared by Direct Precipitation Method10.1016/j.spmi.2015.05.007 ↗
84. Technical Status of Top-Emission Organic Light-Emitting Diodes10.1080/15980316.2021.1876173 ↗
85. Device Efficiency of Organic Light-Emitting Diodes: Progress by Improved Light Outcoupling
86. Optical Energy Losses in Organic-Inorganic Hybrid Perovskite Light-Emitting Diodes10.1002/adom.201800667 ↗
87. Simulation of Light Emission from Thin-Film Microcavities10.1364/JOSAA.15.000962 ↗
88. Highly Efficient Polymer Light-Emitting Devices Based on Sodium Compounds Electron Injection Layer10.1016/j.displa.2021.102018 ↗
89. Manipulation and Control of the Interfacial Polarization in Organic Light-Emitting Diodes by Dipolar Doping10.1063/1.4963796 ↗
90. Photo-Oxidation of Poly(p-Phenylenevinylene)10.1002/adma.19970091306 ↗
91. Salaneck W
92. Velocity and Size Measurement of Droplets from an Ultrasonic Spray Coater Using Photon Correlation Spectroscopy and Turbidimetry
93. Ultrasonically Sprayed and Inkjet Printed Thin Film Electrodes for Organic Solar Cells10.1016/j.tsf.2008.10.124 ↗
94. High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing10.1021/acsphotonics.5b00119 ↗
95. Layer Formation and Morphology of Ultrasonic Spray Coated Polystyrene Nanoparticle Layers
96. Ultrasonic Spray Coating as Deposition Technique for the Light-Emitting Layer in Polymer LEDs10.1016/j.orgel.2015.01.015 ↗
97. Process Optimization of Ultrasonic Spray Coating of Polymer Films10.1021/la4010246 ↗