Effect of porosity distribution on the strength and strain-to-failure of Laser-Powder Bed Fusion printed Ti–6Al–4V
Source abstract
Abstract
The mechanical reliability of alloys produced by Laser-Powder Bed Fusion (LPBF) is a key concern limiting their practical insertion into structural applications. While it is generally accepted that the presence of process induced defects such as lack-of-fusion porosity influences strain to failure, it is unclear what aspects of the defect distribution affect mechanical properties. To this end, we measured the mechanical properties and defect structure of LPBF fabricated Ti–6Al–4V coupons at 4 different porosities. We found that both the strength and strain to failure decreased with increasing porosity. To understand this trend, an experimentally validated computational model was utilized that describes the porosity distribution at two scales: processing induced defects are explicitly represented as voids, while plasticity induced defects are implicitly represented as damage. Analysis of this model allowed the identification of key statistical metrics able to qualify the effects of porosity on mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of ebm ti–6al–4v10.1016/j.ijfatigue.2016.06.001 ↗
2. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted ti-6al-4v10.1016/j.actamat.2018.05.044 ↗
3. Defects-dictated tensile properties of selective laser melted ti-6al-4v10.1016/j.matdes.2018.08.004 ↗
4. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
5. McClintock · 1968
6. Gurson · 1977
7. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
8. Effective yield criterion accounting for microvoid coalescence10.1115/1.4024908 ↗
9. A constitutive model for elastoplastic solids containing primary and secondary voids10.1016/j.jmps.2007.07.008 ↗
10. Failure of metals i: Brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
11. Needleman · 1972
12. Void growth and coalescence in porous plastic solids10.1016/0020-7683(88)90051-0 ↗
13. An elastoviscoplastic model for porous single crystals at finite strains and its assessment based on unit cell simulations10.1016/j.ijplas.2016.05.001 ↗
14. Void growth and coalescence in hexagonal close packed crystals10.1016/j.jmps.2018.12.012 ↗
15. On the micromechanics of voids in nanotwinned materials10.1016/j.jmps.2022.104887 ↗
16. Modeling of ductile fracture: significance of void coalescence10.1016/j.ijsolstr.2005.08.008 ↗
17. An analysis of void distribution effects on plastic flow in porous solids
18. An analysis of void distribution effects on the dynamic growth and coalescence of voids in ductile metals10.1016/0022-5096(93)90080-Y ↗
19. The effects of void cluster size on ductile fracture10.1016/S0749-6419(95)00023-2 ↗
20. Effect of a nonuniform distribution of voids on the plastic response of voided materials: a computational and statistical analysis10.1016/j.ijsolstr.2004.06.048 ↗
21. Dual-scale porosity effects on crack growth in additively manufactured metals: 3d ductile fracture models10.1016/j.jmps.2021.104727 ↗
22. Corroborating tomographic defect metrics with mechanical response in an additively manufactured precipitation-hardened stainless steel10.1063/1.5031506 ↗
23. Image-based multiscale modeling with spatially varying microstructures from experiments: Demonstration with additively manufactured metal in fatigue and fracture10.1016/j.jmps.2021.104350 ↗
24. A void descriptor function to uniquely characterize pore networks and predict ductile-metal failure properties10.1007/s10704-020-00463-1 ↗
25. Evaluation of a modified void descriptor function to uniquely characterize pore networks and predict fracture-related properties in additively manufactured metals10.1016/j.actamat.2021.117464 ↗
26. Reliability of metal additive manufactured materials from modeling the microstructure at different length scales
27. Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of slm titanium alloy10.1016/j.optlastec.2018.11.014 ↗
28. Optimisation of process parameters to address fundamental challenges during selective laser melting of ti-6al-4v: A review10.1016/j.ijmachtools.2018.01.003 ↗
29. Quantification and prediction of lack-of-fusion porosity in the high porosity regime during laser powder bed fusion of ti-6al-4v10.1016/j.jmatprotec.2021.117426 ↗
30. On the localization analysis of orthotropic hill type elastoplastic solids10.1016/0022-5096(94)90021-3 ↗
31. Plastic flow anisotropy drives shear fracture
32. Becker · 1986
33. Effect of yield surface curvature and void nucleation on plastic flow localization10.1016/0022-5096(87)90027-5 ↗
34. Nih image to imagej: 25 years of image analysis10.1038/nmeth.2089 ↗
35. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
36. Constitutive modeling of void shearing effect in ductile fracture of porous materials10.1016/j.engfracmech.2007.07.022 ↗
37. Modification of the gurson model for shear failure10.1016/j.euromechsol.2007.08.002 ↗
38. Assessment of damage and anisotropic plasticity models to predict ti-6al-4v behavior
39. Smith · 2009
40. Review of mechanical properties of ti-6al-4v made by laser-based additive manufacturing using powder feedstock10.1007/s11837-015-1759-z ↗
41. EOS · 2011
42. Deformation and failure mechanisms of Ti–6Al–4V as built by selective laser melting10.1016/j.msea.2019.138456 ↗
43. Microstructure and tensile properties of selectively laser-melted and of hiped laser-melted ti–6al–4v10.1016/j.msea.2013.04.099 ↗
44. Influence of defects on mechanical properties of ti–6al–4 v components produced by selective laser melting and electron beam melting10.1016/j.matdes.2015.07.147 ↗
45. Vi. the phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗
46. Linear fracture mechanics, fracture transition, and fracture control10.1016/0013-7944(68)90001-5 ↗
47. A local criterion for cleavage fracture of a nuclear pressure vessel steel10.1007/BF02663302 ↗
48. Three-dimensional models for the plastic limit-loads at incipient failure of the intervoid matrix in ductile porous solids10.1016/0001-6160(85)90201-9 ↗
49. On the numerical integration of a class of pressure-dependent plasticity models10.1002/nme.1620240713 ↗