journal article·2017-09

Diamond-like carbon layers modified by ion bombardment during growth and researched by Resonant Ultrasound Spectroscopy

Tomáš Kocourek, Miroslav Jelínek, Petr Písařík, Jan Remsa, Michaela Janovská, Michal Landa, Josef Zemek, Vladimír Havránek

Publisher page

Abstract

Abstract Biocompatible Diamond-Like Carbon (DLC) films were prepared by Pulsed Laser Deposition technique using the laser energy density of 10 J cm −2 on the graphite target. The surface of the grown film was modified during the deposition by bombardment with argon, xenon, nitrogen or oxygen ions. The ion energy (up to 150 eV) was changed by gun voltage and by ionic current. The films with high and low diamond/graphite content were prepared. Physical and mechanical properties of biocompatible DLC thin layers prepared by hybrid laser technology were studied. The composition of layers and the content trace elements were determined by the methods of Rutherford Backscattering Spectrometry and Particle Induced X-ray Emission. The content of sp 2 and sp 3 bonds was measured using X-ray Photoelectron Spectroscopy. For different energy of argon and oxygen ions the maximum of sp 3 bonds content was found (83.63% of sp 3 bonds for argon ions). All films were smooth, which was confirmed by profilometry and Atomic Force Microscopy measurements. Maximum roughness Ra and RMS was did not exceed 1 nm. The Younǵs and shear moduli were studied by Resonant Ultrasound Spectroscopy. The Young’s Modulus attained the value of 601 GPa and the shear Modulus attained the value of 253 GPa at the energy of 30 eV of Ar ions. The influence of ion bombardment on DLC film properties is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
2. Influence of ion bombardment on growth and properties of PLD created DLC films10.1007/s00339-012-7215-9 ↗
3. Evaluation of elastic properties of DLC layers using resonant ultrasound spectroscopy and AFM nanoindentation10.1016/j.surfcoat.2011.01.038 ↗
4. Surface roughness of diamond-like carbon films prepared using various techniques10.1016/S0257-8972(00)01139-7 ↗
5. Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD10.1016/S0257-8972(00)00598-3 ↗
6. Amorphisation and growth mechanisms of carbon films under ion beam irradiation10.1016/S0960-0779(98)00244-6 ↗
7. Gonzalez-Elipe · 2003
8. Growth of diamond-like carbon films using low energy ion beam sputter – bombardment deposition with Ar ions
9. Modification of amorphous diamond-like films by bombardment with low-energy ions10.1016/0925-9635(95)00490-4 ↗
10. Carbon nitride films deposited by reactive sputtering and pulsed laser ablation10.1016/j.tsf.2003.12.009 ↗
11. Surface modification of diamond-like carbon films to graphene under low energy ion beam irradiation10.1016/j.apsusc.2011.11.009 ↗
12. Deposition mechanisms for promoting sp3 bonding in diamond-like carbon10.1016/0925-9635(93)90262-Z ↗
13. Effect of ion bombardment on the phase composition and mechanical properties of diamond-like carbon films10.1134/S1027451013060098 ↗
14. A simple model for the formation of compressive stress in thin films by ion bombardment10.1016/0040-6090(93)90201-Y ↗
15. Residual stress in diamond-like carbon films- role of growth conditions and ion irradiation10.1134/S1027451010020114 ↗
16. High-resolution X-ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
17. Linearized forward and inverse problems of the resonant ultrasound spectroscopy for the evaluation of thin surface layers10.1121/1.3500671 ↗
18. Anisotropic elasticity of DyScO3 substrates10.1088/0953-8984/24/38/385404 ↗