Carrier selective MoOx/Si heterojunctions: Role of thickness
Source abstract
Abstract
Abstract In this work, we present thickness-dependent change in the hole-blocking property of heterojunctions consisting of wide band-gap MoOx thin films on p-Si substrates. Radio frequency sputter-deposited MoOx films are amorphous in nature and compositional analysis reveals an increase in oxygen vacancy with film thickness. The optical band-gap measurement reveals a systematic red shift with increasing film thickness. Using Kelvin probe force microscopy, it is demonstrated that work function of MoOx films increases up to a thickness of 10 nm, while it decreases for higher thicknesses (up to 30 nm). Interestingly, all the MoOx/Si heterojunctions prevent the flow of holes but allow that of electrons. Post-growth annealing of MoOx films (at 573 K for 1 h in air) leads to a modification in the hole-blocking property of the MoOx/Si heterojunctions and a similar thickness-dependent trend is prevailed (as observed for as-prepared MoOx/Si heterojunctions). Based on our experimental results, it is concluded that a 10 nm-thick MoOx film exhibits the best hole-blocking property, albeit annealing leads to a marginal deterioration in its hole-blocking efficiency. The observed results are very important for the construction of hole-blocking hetero-junction solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Würfel · 2005
2. Tunable antireflection from conformal Al-doped ZnO films on nanofaceted Si templates10.1186/1556-276X-9-192 ↗
3. Growth of TiO2 thin films on chemically textured Si for solar cell applications as a hole-blocking and antireflection layer10.1016/j.apsusc.2017.01.307 ↗
4. Experimental and simulation studies on temporal evolution of chemically etched Si surface: Tunable light trapping and cold cathode electron emission properties10.1063/1.5079481 ↗
5. Hole-blocking titanium-oxide / silicon heterojunction and its application to photovoltaics
6. About MoO3 as a buffer layer in organic devices
7. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
8. metal oxides10.1038/nmat3159 ↗
9. Molybdenum oxide MoOx: A versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
10. Thickness-controlled photoresponsivity of ZnO:Al/Si heterostructures: Role of junction barrier height10.1016/j.matlet.2014.07.171 ↗
11. Metal oxides as a hole-injecting layer for an organic electroluminescent device10.1088/0022-3727/29/11/004 ↗
12. Transition Metal Oxides for Organic Electronics : Energetics
13. MoO3/Ag/MoO3 top anode structure for semitransparent inverted organic solar cells10.1016/j.cap.2014.06.004 ↗
14. Gas-sensing characteristics of modified-MoO3 thin films using Ti-overlayers for NH3 gas sensors10.1016/S0925-4005(99)00506-7 ↗
15. Transition metal oxide work functions: The influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
16. Li · Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells · 2013 · 1 · 6614
17. Formation of Ohmic hole injection by inserting an ultrathin layer of molybdenum trioxide between indium tin oxide and organic hole-transporting layers10.1063/1.2825275 ↗
18. Structural defect-dependent resistive switching in Cu-O/Si studied by Kelvin probe force microscopy and conductive atomic force microscopy10.1088/0957-4484/26/34/345702 ↗
19. WSXM : A software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
20. Growth angle-dependent tunable work function and optoelectronic properties of MoOx thin films10.1016/j.apsusc.2019.144958 ↗
21. Resistance switching properties of molybdenum oxide films10.1016/j.tsf.2011.10.174 ↗
22. Growth and characterization of molybdenum oxide nanorods by RF magnetron sputtering and subsequent10.1088/0022-3727/42/17/175305 ↗
23. Alteration of architecture of MoO3 nanostructures on arbitrary substrates: growth kinetics, spectroscopic and gas sensing properties10.1039/C4NR04529G ↗
24. Gap states assisted MoO3 nanobelt photodetector with wide spectrum response10.1038/srep04891 ↗
25. Growth and surface characterization of sputter-deposited molybdenum oxide thin films10.1016/j.apsusc.2006.12.012 ↗
26. Room-temperature ferromagnetism in hierarchically branched MoO3 nanostructures10.1039/C1CE05700F ↗
27. Influence of grain size on local work function and optoelectronic properties of n-ZTO/p-Si heterostructures10.1016/j.apsusc.2019.06.278 ↗
28. Thickness-dependent blue shift in the excitonic peak of conformally grown ZnO: Al on ion-beam fabricated self-organized Si ripples10.1063/1.4930223 ↗
29. Mixed Nb 2 O 5: MoO3 (95: 5 and 85: 15) thin films and their properties for electrochromic device applications10.1007/s10854-016-4770-4 ↗
30. A deep ultraviolet to near-infrared photoresponse from glucose-derived graphene oxide10.1039/C4TC01175A ↗
31. R. Singh, M. Kumar, M. Saini, B. Satpati, T. Som, White light-driven photo response of TiO2 thin films : Influence of substrate texturing, 174 (2018) 231–239. https://doi.org/10.1016/j.solener.2018.08.086.10.1016/j.solener.2018.08.086 ↗
32. Reactive sputtering growth of Co3O4thin films for all metal oxide device: a semitransparent and self-powered ultraviolet photodetector10.1016/j.mssp.2017.09.018 ↗
33. Field-induced doping-mediated tunability in work function of Al-doped ZnO: Kelvin probe force microscopy and first-principle theory10.1088/0957-4484/27/37/375702 ↗
34. Intrinsic inhomogeneous barrier height at the n-TiO2/p-Si hole-blocking junction10.1016/j.apsusc.2017.10.001 ↗
35. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
36. Schottky barrier height measurements of Cu/Si(001), Ag/Si(001), and Au/Si(001) interfaces utilizing ballistic electron emission microscopy and ballistic hole emission microscopy10.1063/1.4831756 ↗
37. Sze · 1969
38. Effect of grain-boundaries on electrical properties of n-ZnO:Al/p-Si heterojunction diodes10.1063/1.4823480 ↗
39. The effect of air annealing on the properties of MoO3 films and its application for organic light emitting diodes10.7567/JJAP.57.03DA04 ↗
40. Post-annealing effect upon optical properties of electron beam evaporated molybdenum oxide thin films10.1016/j.apsusc.2008.10.069 ↗
41. Improved photovoltaic performance of CdTe-based solar cells : Roles of using a hole-blocking layer and nanoscale imaging of barrier height at interfaces10.1016/j.solener.2020.12.021 ↗