journal article·2024-05Open access

Hydroxyl transport mechanisms upon passivation of Cr-Fe-Co-Ni-Mo multi-principal element alloy surfaces investigated by isotopic labelling

Xueying Wang, Dimitri Mercier, Sandrine Zanna, Antoine Seyeux, Loïc Perrière, Mathilde Laurent-Brocq, Ivan Guillot, Vincent Maurice, Philippe Marcus

Abstract

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with deuterium labelling (D2O), and X-ray photoelectron spectroscopy (XPS) were applied to investigate the interfacial transport mechanisms of hydroxyls between aqueous electrolyte and outer part of the protective oxide film during passivation of Cr15Fe10Co5Ni60Mo10 multi-principal element alloy surfaces. A ToF-SIMS signal treatment methodology was developed to retrieve the in-depth distribution of deuterated hydroxides in the nanometer-thick surface oxide film. After immersion at free potential or anodic passivation in acidified D2O, the initial bilayer structure is retained. The use of heavy water electrolyte has no effect on the composition alterations induced by passivation. Deuterated species were detected mostly in the outer layer of the surface oxide film. Pure inward hydroxyl diffusion from electrolyte/oxide to oxide/metal interface is excluded from being primarily responsible for oxide film growth induced by anodic passivation. The hydroxyls from the dissolving hydroxide species are retained in the oxide film and participate in forming Cr hydroxide, thus reducing the hydroxyl surface uptake from the electrolyte. This work provides deeper insight into the mechanisms of oxide growth and corrosion protection induced by anodic passivation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Advanced Materials Characterization Techniques · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Oxidation of NiCr and NiCrFe alloys at room temperature10.1002/sia.740111207 ↗
2. Origin of nanoscale heterogeneity in the surface oxide film protecting stainless steel against corrosion10.1038/s41529-019-0091-4 ↗
3. Passivity in metals and alloys10.1016/S0010-938X(79)80104-3 ↗
4. Passivity of Metals
5. Redefining passivity breakdown of super duplex stainless steel by electrochemical operando synchrotron near surface X-ray analyses10.1038/s41529-019-0084-3 ↗
6. Theory of the Oxidation of Metals10.1088/0034-4885/12/1/308 ↗
7. Low-temperature oxidation10.1007/BF00603582 ↗
8. A Point Defect Model for Anodic Passive Films: I. Film Growth Kinetics10.1149/1.2127591 ↗
9. Oxide Film Growth Kinetics on Metals and Alloys: I. Physical Model10.1149/2.036306jes ↗
10. Oxide Film Growth Kinetics on Metals and Alloys: II. Numerical Simulation of Transient Behavior10.1149/2.037306jes ↗
11. An AES and XPS study of the high alloy austenitic stainless steel 254 SMO® tested in a ferric chloride solution10.1016/0010-938X(94)90115-5 ↗
12. A Round Robin on combined electrochemical and AES/ESCA characterization of the passive films on Fe-Cr and Fe-Cr-Mo alloys10.1016/0010-938X(88)90026-1 ↗
13. XPS and ToF-SIMS Investigation of Native Oxides and Passive Films Formed on Nickel Alloys Containing Chromium and Molybdenum
14. Characterization of film properties on the Ni-Cr-Mo Alloy C-200010.1016/j.electacta.2012.11.029 ↗
15. XPS and STM Study of Passive Films Formed on Fe-22Cr(110) Single-Crystal Surfaces10.1149/1.1836616 ↗
16. Atomically Resolved STM of Oxide Film Structures on Fe-Cr Alloys during Passivation in Sulfuric Acid Solution10.1149/1.2059380 ↗
17. A scanning tunnelling microscopy study of structure and structural relaxation in passive oxide films on Fe-Cr alloys10.1080/01418639408241803 ↗
18. In situ Scanning Tunneling Microscopy Study of the Structure of the Hydroxylated Anodic Oxide Film Formed on Cr(110) Single-Crystal Surfaces10.1021/jp9911088 ↗
19. In situ atomic scale visualization of surface kinetics driven dynamics of oxide growth on a Ni–Cr surface10.1039/C5CC09165A ↗
20. Unmasking chloride attack on the passive film of metals10.1038/s41467-018-04942-x ↗
21. Passivation-Induced Cr and Mo Enrichments of 316L Stainless Steel Surfaces and Effects of Controlled Pre-Oxidation10.1149/1945-7111/abc727 ↗
22. The anodic dissolution and passivation of NiCrFe alloys studied by ESCA10.1016/0010-938X(92)90113-H ↗
23. Surface composition of stainless steels during anodic dissolution and passivation studied by ESCA10.1149/1.2113683 ↗
24. ESCA studies of Ni-Cr alloys10.1007/BF00324199 ↗
25. Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces10.1039/C4FD00231H ↗
26. Nanoscale Morphology and Atomic Structure of Passive Films on Stainless Steel10.1149/2.067306jes ↗
27. Mechanisms of Cr and Mo Enrichments in the Passive Oxide Film on 316L Austenitic Stainless Steel10.3389/fmats.2019.00232 ↗
28. Multi-Principal-Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating10.1002/adem.200300507 ↗
29. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes10.1002/adem.200300567 ↗
30. Effect of molybdenum content on the microstructure and corrosion behavior of FeCoCrNiMox high-entropy alloys10.1016/j.jmst.2019.10.020 ↗
31. X.-L. Shang, Z.-J. Wang, Q.-F. Wu, J.-C. Wang, J.-J. Li, J.-K. Yu, Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments, Acta Metall. Sin. (Engl. Lett.) 32 (2019) 41–51. 10.1007/s40195-018-0812-7.10.1007/s40195-018-0812-7 ↗
32. Effect of Molybdenum on the Corrosion Behavior of High-Entropy Alloys CoCrFeNi2 and CoCrFeNi2Mo0.25 under Sodium Chloride Aqueous Conditions10.1155/2018/3016304 ↗
33. Z. Niu, Y. Wang, C. Geng, J. Xu, Y. Wang, Microstructural evolution, mechanical and corrosion behaviors of as-annealed CoCrFeNiMox (x = 0, 0.2, 0.5, 0.8, 1) high entropy alloys, J. Alloys Compd. 820 (2020) 153273. 10.1016/j.jallcom.2019.153273.10.1016/j.jallcom.2019.153273 ↗
34. Enhanced passivity of Cr-Fe-Co-Ni-Mo multi-component single-phase face-centred cubic alloys: design, production and corrosion behaviour10.1016/j.corsci.2022.110233 ↗
35. Origin of enhanced passivity of Cr–Fe–Co–Ni–Mo multi-principal element alloy surfaces10.1038/s41529-023-00330-z ↗
36. X-ray photoelectron spectroscopy and electrochemical investigation of the passive behavior of high-entropy FeCoCrNiMox alloys in sulfuric acid10.1016/j.apsusc.2019.143903 ↗
37. Effects of Chloride Ions on Passive Oxide Films Formed on Cr-Fe-Co-Ni(-Mo) Multi-Principal Element Alloy Surfaces
38. Atomistic insights on enhanced passivity: DFT study of substitutional Mo on Cr2O3 and Fe2O3 surfaces10.1016/j.corsci.2023.111543 ↗
39. ToF-SIMS investigation with 18O isotopic tracer of the ion transport mechanisms in surface oxides on nickel-chromium and nickel-chromium-molybdenum alloys10.1016/j.electacta.2022.140797 ↗
40. Insight on passivity of high entropy alloys: Thermal stability and ion transport mechanisms in the passive oxide film on CoCrFeMnNi surfaces10.1016/j.corsci.2021.109540 ↗
41. Volatilization and Transport Mechanisms During Cr Oxidation at 300 °C Studied In Situ by ToF-SIMS10.1007/s11085-017-9756-y ↗
42. Oxide layer growth on nickel-base alloy surfaces in high temperature water and in O2 studied by ToF-SIMS with isotopic tracers10.1016/j.corsci.2018.10.009 ↗
43. Mechanism of hydrogen absorption during the exposure of alloy 600-like single-crystals to PWR primary simulated media10.1016/j.jnucmat.2011.04.066 ↗
44. Microstructural Characterization of SCC Crack Tip and Oxide Film for SUS 316 Stainless Steel in Simulated PWR Primary Water at 320°C10.1080/18811248.2005.9726383 ↗
45. Model of local hydrogen permeability in stainless steel with two coexisting structures10.1038/s41598-021-87727-5 ↗
46. Mechanistic understanding of the roles of hydrogen in modification of oxide film of alloy 600 in high temperature high pressure water environment10.1016/j.corsci.2020.108656 ↗
47. ToF-SIMS and ERDA study of hydrogen and deuterium in nickel-base alloys oxidized in water10.1016/j.corsci.2018.06.006 ↗
48. A new model for hydrogen-assisted cracking (hydrogen “embrittlement”)10.1007/BF02642048 ↗
49. On the role of precipitates in hydrogen trapping and hydrogen embrittlement of a nickel-based superalloy10.1016/j.corsci.2018.10.019 ↗
50. Characterisation of oxygen and hydrogen migration through oxide scales formed on nickel-base alloys in PWR primary medium conditions10.1016/j.ssi.2012.10.012 ↗
51. XPS study of the thermal stability of passivated NiCrFeCoMo multi-principal element alloy surfaces10.1002/sia.7193 ↗
52. Highly Correlated Hydride Ion Tracer Diffusion in SrTiO3–xHx Oxyhydrides10.1021/jacs.8b12985 ↗
53. Rates and Mechanisms of Isotopic Exchange10.2138/gsrmg.43.1.83 ↗
54. H.C. Urey, Some Thermodynamic Properties of Hydrogen and Deuterium. Les Prix Nobel en 1934. 1st Edition. Stockholm: Kungl. Boktryckeriet P. A. Norstedt & Söner, 1935., Kungl. Boktryckeriet P. A. Norstedt & Söner, Stockholm, 1935.
55. X-Ray Photoelectron Spectroscopic Examinations of Electrochemically Formed Passive Layers on Ni-Cr Alloys10.1149/1.1837577 ↗
56. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
57. Calculations of electron inelastic mean free paths. II. Data for 27 elements over the 50–2000 eV range10.1002/sia.740171304 ↗
58. 2014
59. Passivation mechanisms and pre-oxidation effects on model surfaces of FeCrNi austenitic stainless steel10.1016/j.corsci.2020.108483 ↗
60. Communication—Dissolution and Passivation of a Ni-Cr-Fe-Ru-Mo-W High Entropy Alloy by Elementally Resolved Electrochemistry
61. Elementally Resolved Dissolution Kinetics of a Ni-Fe-Cr-Mn-Co Multi-Principal Element Alloy in Sulfuric Acid Using AESEC-EIS10.1149/1945-7111/ac862b ↗
62. Passivation of a corrosion resistant high entropy alloy in non-oxidizing sulfate solutions10.1016/j.actamat.2018.10.026 ↗
63. Aqueous passivation of multi-principal element alloy Ni38Fe20Cr22Mn10Co10: Unexpected high Cr enrichment within the passive film10.1016/j.actamat.2020.07.024 ↗
64. Passivation-Induced Physicochemical Alterations of the Native Surface Oxide Film on 316L Austenitic Stainless Steel10.1149/2.0321911jes ↗
65. Passivation of Fe–Cr alloys studied with ICP-AES and EQCM10.1016/S0010-938X(01)00147-0 ↗
66. Atomic modeling for the initial stage of chromium passivation10.1007/s12613-019-1803-z ↗
67. Hydroxylation of ultra-thin films of α-Cr2O3(0001) formed on Cr(110)10.1016/S0039-6028(00)00880-3 ↗
68. Interaction of water with oxide thin film model systems10.1557/jmr.2018.454 ↗
69. The interaction of metal oxide surfaces with complexing agents dissolved in water10.1016/S0010-8545(99)00005-3 ↗
70. Low–temperature exchange of hydrogen and deuterium between molecular ethanol and water on Au(111)10.1016/j.susc.2018.10.001 ↗
71. Gas-phase hydrogen-deuterium exchange reactions of hydroxide and hydroxide-d ions with weakly acidic neutrals10.1021/ja00347a009 ↗
72. The electrochemistry of chromium in acidic chloride solutions: Anodic dissolution and passivation10.1016/0010-938X(91)90045-Q ↗