Improvement of Nb/Cu adhesion and increase of Nb crystal size by laser radiation
Source abstract
Abstract
Abstract Adhesion of Nb thin film to Cu substrate and size of Nb crystal grains for RF cavities were studied depending on laser intensity and dose. Structures of Nb/Cu, obtained by magnetron sputtering with 500 ˚C (Nr.1) and 700 ˚C (Nr.2) deposition temperature, were irradiated by pulsed Nd:YAG laser. Four areas, irradiated with doses D1 = 5.6x1020, D2 = 8.8x1020, D3 = 1.76x1021 and D4 = 1.76x1022 phot/cm2, were studied. Delamination was investigated by scratching method using conical diamond indenter with force increased from 10 mN to 3.0 N. Characterization of the structure before and after the irradiation was performed using an optical microscope, AFM, SEM and XRD. Comparing with the non-irradiated area, the critical delamination force increased by 10% for sample Nr.2 and by 36% for sample Nr.1 at laser doses D2 and D4, respectively. It means that Nb coating layer of sample Nr. 1 is better than that of sample Nr.2. The decrease of average roughness of Nb layer by an order of magnitude was observed after the laser irradiation. The improvement of the structure adhesion was also observed and explained by the diffusion of Nb atoms into Cu through dislocations. The increase of Nb crystallites size from 20 to 35 nm was calculated using XRD data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Short history of laser development10.1117/1.3483597 ↗
2. Modeling on surface cut quality of CO2 laser cutting for Austenitic Stainless steel sheet
3. Electrochemical corrosion assisted laser drilling of micro-hole without recast layer
4. Two-step approach to improving the quality of laser micro-hole drilling on thermal barrier coated nickel base alloys10.1016/j.optlaseng.2019.05.002 ↗
5. Effect of energy parameters of pulsed laser welding of Zr-1%Nb alloy on metal contamination with gases and properties of welds10.1016/j.jmapro.2019.06.025 ↗
6. A. Voznyi, V. Kosyak, P. Onufrijevs, L. Grase, J. Vecstaudža, A. Opanasyuk, A. Medvid’, Laser-induced SnS2-SnS phase transition and surface modification in SnS2thin films, J. Alloys Compd. 688 (2016) 130–139. doi:10.1016/j.jallcom.2016.07.103.10.1016/j.jallcom.2016.07.103 ↗
7. 2D lattice formation by YAG: Nd laser on the surface of Ge single crystal10.1016/j.apsusc.2004.10.142 ↗
8. V. Yakovlev, Design of a compact integrated high-average power superconducting radio-frequency (SRF) electron beam source
9. 20 Years of experience with the Nb/Cu technology for superconducting cavities and perspectives for future developments10.1016/j.physc.2006.03.044 ↗
10. C. Pira, C. Antoine, A. Katasevs, O. Kugeler, A. Medvids, E. Seiler, A. Sublet, R. Valizadeh, M. Vogel, O. Malyshev, Evaluation of cleaning process, 2018. https://edms.cern.ch/ui/file/1820617/1.0/ARIES-Del-D15.1-Final.pdf.
11. C. Pira, E. Chyhyrynets, L. National, L. Infn, C.Z. Antoine, U. Paris-saclay, J. Kaupužs, A. Katasevs, A. Medvids, P. Onufrijevs, O. Kugeler, H. Berlin, E. Gmbh, O.B. Malyshev, R. Valizadeh, E. Seiler, R. Ries, E. Engineering, A. Sublet, M. Vogel, S.B. Leith, X. Jiang, M. Engineering, IMPACT OF THE Cu SUBSTRATE SURFACE PREPARATION ON THE MORPHOLOGICAL , SUPERCONDUCTIVE AND RF PROPERTIES OF THE Nb SUPERCONDUCTIVE COATINGS * Electro-Polishing, 19th Int. Conf. RF Supercond. (2019) 937–942. doi:10.18429/JACoW-SRF2019-THP041.
12. S. Calatroni, J.P. Bacher, C. Benvenuti, R. Cosso, J.M. Dalin, J. Guérin, D. Lacarrère, A. Lasserre, G. Orlandi, E. Radicioni, F. Scalambrin, M. Taufer, Influence of copper substrate treatments on properties of niobium coatings, 6th Work. RF Supercond. (SRF 1993). (1993) 687–695. http://www.researchgate.net/publication/41584307_Influence_of_copper_substrate_treatments_on_properties_of_niobium_coatings/file/d912f50c882aa3c6ea.pdf.
13. W.R. Frisken, G.H. Chapman, J. Wang, C.-H. Choo, Y. Tu, Laser annealing Niobium Surfaces Laser Annealing Experiments with Niobium, (n.d.) 360–362.
14. Y.J. Yang, X.Y. Lu, D.T. Xie, W.W. Tan, L. Xiao, D.Y. Yang, B.T. Li, STUDY PROGRESS OF PULSE LASER ANNEALING FOR NIOBIUM FILM ON COPPER *, 29th Linear Accel. Conf. (2008) 438–441. doi:10.18429/JACoW-LINAC2018-TUPO048.
15. In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates10.1016/j.msea.2018.08.043 ↗
16. Microstructure and Solidification Crack Susceptibility of Al 6014 Molten Alloy Subjected to a Spatially Oscillated Laser Beam10.3390/ma11040648 ↗
17. Z. Abdulsattar, W. Al-ashtari, Effects of Laser Parameters on Solidification Cracks Formation during LSM Treatment for AA6061, 13 (2018) 5614–5617.
18. Dynamic of Laser Ablation in SiC10.4028/www.scientific.net/MSF.457-460.411 ↗
19. Über die Theorie der Eisbildung10.1007/BF01692459 ↗
20. Cebeci · 2002
21. https://periodictable.com, (n.d.). https://periodictable.com.
22. Quantification Of Deformation-Induced Surface Roughening Using Modified Roughness Parameters
23. Materials Degradation and its Control by
24. Dearnley · 2017
25. D.H. Lowndes, 11. Growth and Doping of Compound Semiconductor Films by Pulsed Laser Ablation, in: J.C. Miller, R.F. Haglund (Eds.), Laser Ablation Absorpt., Academic Press, London, 1997: pp. 475–571. doi:10.1016/S0076-695X(08)60403-2.10.1016/S0076-695X(08)60403-2 ↗