journal article·2021-06Open access

Mechanism of corrosion inhibition of intermetallic Al2Cu in acidic solution

Przemysław Kwolek, Marek Wojnicki, Edit Csapó

Abstract

The objective of this work was to study the kinetics of phosphomolybdenum blue formation onto the surface of intermetallic Al2Cu in orthophosphoric acid solution. This was performed using UV–Vis spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical methods. The latter included measurement of open circuit potential, cyclic voltammograms, polarisation, and chronoamperometric curves as well as impedance spectra. It was shown that a stable form of phosphomolybdenum blue is formed via decomposition of an intermediate in the solution. However, neither phosphomolybdenum blue nor heteropolyoxomolybdate species behave as a corrosion inhibitor. A protective layer of molybdenum oxides formed immediately upon immersion of intermetallic in the corrosive environment, is responsible for corrosion inhibition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Mondolfo · 1976
2. Electrochemical characteristics of the Al2Cu, Al3Ta and Al3Zr intermetallic phases and their relevancy to the localized corrosion of Al alloys10.1016/0010-938X(93)90148-A ↗
3. A compilation of corrosion potentials reported for intermetallic phases in aluminum alloys10.1149/1.2048447 ↗
4. Copper deposition during the corrosion of aluminum alloy 2024 in sodium chloride solutions
5. Evidence for Cu Ion Formation by Dissolution and Dealloying the Al2CuMg Intermetallic Compound in Rotating Ring-Disk Collection Experiments10.1149/1.1393164 ↗
6. Dealloying and Corrosion of Al Alloy 2024–T310.1149/1.1498258 ↗
7. P. Kwolek, G. Mrówka-Nowotnik, M. Wytrwal-Sarna, Corrosion of structural constituents of 2017 aluminium alloy in acidic solutions containing inhibitors, Mater. Corr. (n.d.). https://doi.org/10.1002/maco.202012046.10.1002/maco.202012046 ↗
8. Corrosion mechanism of laser-melted AA 2014 and AA 2024 alloys10.1016/j.apsusc.2005.01.067 ↗
9. Effect of methanol on the corrosion behaviour of Al-Cu Alloys in sulphuric acid10.1080/1478422X.2017.1335531 ↗
10. Significantly changed intergranular corrosion and exfoliation corrosion behavior of the ultra-fine grained Al-5 mass% Cu alloy fabricated by ECAP10.1002/maco.201206874 ↗
11. The Correlation between Electrochemical Corrosion Resistance and Mechanical Strength of As-Cast Al-Cu and Al-Si Alloys10.1016/S1452-3981(23)19680-5 ↗
12. The roles of macrosegregation and of dendritic array spacings on the electrochemical behavior of an Al–4.5 wt% Cu alloy10.1016/j.electacta.2006.10.004 ↗
13. ASTM B137-95, Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum, 2009.
14. The toxicology of chromium with respect to its chemical speciation: A review10.1002/jat.2550130314 ↗
15. Sodium molybdate as a corrosion inhibitor for aluminium in H3PO4 solution10.1016/j.corsci.2011.05.002 ↗
16. The corrosion rate of aluminium in the orthophosphoric acid solutions in the presence of sodium molybdate10.1016/j.corsci.2016.02.005 ↗
17. The replacement of chromate by molybdate in phosphoric acid-based etch solutions for aluminium alloys10.1080/1478422X.2018.1446582 ↗
18. Corrosion behaviour of 7075 aluminium alloy in acidic solution10.1039/D0RA04215C ↗
19. Pope · 1983
20. The molybdenum blue reaction for the determination of orthophosphate revisited : Opening the black box10.1016/j.aca.2015.07.030 ↗
21. Spectrophotometric study of corrosion inhibition of aluminium in orthophosphoric acid aqueous solutions by using sodium molybdate
22. Corrosion Inhibition of Aluminum Alloy 2024–T3 by Aqueous Vanadium Species10.1149/1.2907772 ↗
23. Mechanisms of corrosion inhibition of AA2024-T3 by vanadates10.1016/j.corsci.2006.10.027 ↗
24. Factors affecting the corrosion behaviour of aluminium in acid solutions: II. Inorganic additives as corrosion inhibitors for Al in HCl solutions10.1016/j.corsci.2012.09.038 ↗
25. Pentavalent Vanadium Species as Potential Corrosion Inhibitors of Al2Cu Intermetallic Phase in the10.3390/ma13081946 ↗
26. Lasia · 2014
27. Orthophosphoric acid solutions of sodium orthovanadate, sodium tungstate, and sodium molybdate as potential corrosion inhibitors of the Al2Cu intermetallic phase10.1007/s10008-019-04397-0 ↗
28. Electrochemically induced transformations of heteropolyanions: New electroactive metal oxide films studied by the electrochemical quartz crystal microbalance10.1007/s100080050180 ↗
29. Molybdenum, molybdenum oxides, and their electrochemistry10.1002/cssc.201100660 ↗
30. Generalized molybdenum oxide surface chemical state XPS determination via informed amorphous sample model10.1016/j.apsusc.2014.11.077 ↗
31. Goldstein · 1992
32. On the impedance plane displays for irreversible electrode reactions based on the stability conditions of the steady-state-I. One state variable besides electrode potential10.1016/0013-4686(90)90077-D ↗
33. Constant-Phase-Element Behavior Caused by Resistivity Distributions in Films I. Theory10.1149/1.3499564 ↗
34. Kinetics of hydrogen underpotential deposition at iridium in sulfuric and perchloric acids10.1016/j.electacta.2016.12.116 ↗
35. Optical properties and color-center formation in thin films of molybdenum trioxide10.1063/1.1708145 ↗
36. Influence of molybdophosphoric acid on the kinetics of the anodic coating dissolution10.1016/j.surfcoat.2018.10.055 ↗
37. Thin anodic oxide layers on aluminium and other valve metals: high field regime10.1016/0927-796X(93)90005-N ↗