Resistance of di-cationic surfactant containing pyridinium ions to metal oxidation in 1.0 M HCl medium
Source abstract
Abstract
In order to prevent metal corrosion in low-carbon steel, which is exposed to faster corrosion in acidic environments, a di-cationic surfactant containing two pyridinium ions with high anti-corrosion potential was synthesized in this study. The structural characterization of the new compound was carried out by spectroscopic techniques (FT-IR and NMR). As a result of corrosion tests performed with electrochemical techniques such as potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) for different inhibitor concentrations (2, 10 and 50 ppm) in 1.0 M HCl solution at 25 degrees C, it was found that the anti-corrosion effect increases with increasing inhibitor concentration. The adsorption of the surfactant to the metal surface has been proven by the contact angles measured for pure water dripping on the metal surface. From the equilibrium constant and Gibbs free adsorption energy calculated by Langmuir adsorption isotherm, it was determined that this di-cationic surfactant has a high adsorption ability and adheres to the surface by chemical adsorption. The chemical indices of conceptual density functional theory (DFT) were also examined to develop an understanding of how molecular/electronic factors can alter inhibition efficiency of inhibitor compound. In addition to this process, a Monte Carlo Simulation study was also performed. The corrosion protection of the metal was visually examined by scanning electron microscopy (SEM) analysis, the elemental percentage of the metal surface was revealed by electron dispersive X-ray spectroscopy (EDX) analysis and the average roughness of the surface was determined by atomic force microscopy (AFM) analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Surfactants and Colloidal Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Inhibitors for acid corrosion of metals based on quaternary pyridinium salts containing carbonyl groups10.1016/j.matpr.2018.10.094 ↗
2. Insights of corrosion inhibitor based in pyridinium ionic liquids10.1007/s13369-022-07502-0 ↗
3. Corrosion behavior of a smart inhibitor in hydrochloric acid molar: Experimental and theoretical studies
4. Synthesis of N-alkyl-4-(4-hydroxybut-2-ynyl) pyridinium bromides and their corrosion inhibition activities on X70 steel in 5M HCl10.1016/j.corsci.2012.07.022 ↗
5. I. Öztürk, Corrosion protection of mild steel in cooling water systems with green polymeric inhibitors. (Doktora tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Polimer Bilim ve Teknolojisi Ana Bilim Dalı), İstanbul, Türkiye, 2020. https://polen.itu.edu.tr:8443/server/api/core/bitstreams/98751947-bf03-4830-8f3c-67544e69ce62/content.
6. Pyridinium salts: from synthesis to reactivity and applications10.1039/C7QO00836H ↗
7. Synthesis and properties of a novel class of gemini pyridinium surfactants10.1021/la701154w ↗
8. New pyridinium bromide mono-cationic surfactant as corrosion inhibitor for carbon steel during chemical cleaning: Experimental and theoretical studies10.1016/j.molliq.2019.111480 ↗
9. Synthesis of Di- and Tricationic Surfactants and Comparison of Their Activity on Oxidation of Metal in HCl Media
10. The use of quantum chemical methods in corrosion inhibitor studies10.1016/j.corsci.2008.08.043 ↗
11. Molecular modeling of organic corrosion inhibitors: Calculations, pitfalls, and conceptualization of molecule - surface bonding10.1016/j.corsci.2021.109650 ↗
12. Cationic gemini-surfactants based on waste cooking oil as new ‘green’ inhibitors for N80-steel corrosion in sulphuric acid: A combined empirical and theoretical approaches10.1016/j.molstruc.2019.127442 ↗
13. Experimental and computational approaches of sustainable quaternary bisammonium fluorosurfactants for corrosion inhibition as protective films at mild steel/H2SO4 interface10.1016/j.colsurfa.2021.126141 ↗
14. Corrosion inhibition of carbon steel in hydrochloric acid solution using newly synthesized urea-based cationic fluorosurfactants: experimental and computational investigations10.1039/D0NJ04004E ↗
15. Novel synthesized cationic surfactants based on natural piper nigrum as sustainable-green inhibitors for steel pipeline corrosion in CO2-3.5% NaCl: DFT, Monte Carlo simulations and experimental approaches10.1016/j.jclepro.2019.119510 ↗
16. Anonymous, Cold rolled low carbon steel flat products for cold forming—technical delivery conditions, German version EN 10130:2006, DIN (Deutsches Institut für Normung e.V.) Standard; 2007.
17. Synthesis and corrosion inhibition behavior of novel amide-based quarternary di-cationic surfactants on carbon steel in HCl solutions
18. Recycling a Scrapped Magnetic Stirrer/Heater Using an Arduino Microcontroller
19. Synthesis of quaternary, long-chain N-alkyl amides and their corrosion inhibition in acidic media10.1007/s11743-014-1566-5 ↗
20. Evaluation of the corrosion inhibiting efficacy of a newly synthesized nitrone against St37 steel corrosion in acidic medium: experimental and theoretical approaches10.1016/j.msec.2018.08.031 ↗
21. M. J. Frisch, G. W. Trucks, H. B. Schlegel, G. E. Scuseria, M. A. Robb, J. R. Cheeseman, G. Scalmani, V. Barone, B. Mennucci, G. A. Petersson, H. Nakatsuji, M. Caricato, X. Li, H. P. Hratchian, A. F. Izmaylov, J. Bloino, G. Zheng, J. L. Sonnenberg, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T. Nakajima, Y. Honda, O. Kitao, H. Nakai, T. Vreven, J. A. Montgomery Jr., J. E. Peralta, F. Ogliaro, M. Bearpark, J. J. Heyd, E. Brothers, K. N. Kudin, V. N. Staroverov, R. Kobayashi, J. Normand, K. Raghavachari, A. Rendell, J. C. Burant, S. S. Iyengar, J. Tomasi, M. Cossi, N. Rega, J. M. Millam, M. Klene, J. E. Knox, J. B. Cross, V. Bakken, C. Adamo, J. Jaramillo, R. Gomperts, R. E. Stratmann, O. Yazyev, A. J. Austin, R. Cammi, C. Pomelli, J. W. Ochterski, R. L. Martin, K. Morokuma, V. G. Zakrzewski, G. A. Voth, P. Salvador, J. J. Dannenberg, S. Dapprich, A. D. Daniels, Ö. Farkas, J. B. Foresman, J. V. Ortiz, J. Cioslowski, D. J. Fox, Gaussian 09, Revision C.01,Gaussian, Inc., Wallingford CT, 2009.
22. Multiscale computational modeling of phytochemicals for iron corrosion inhibition: Bridging DFT, SCC-DFTB, and molecular dynamics for eco-friendly solutions10.1016/j.molliq.2024.125070 ↗
23. Acetylene adsorption to Fe (100), (110), and (111) surfaces; structures and reactions10.1016/0039-6028(84)90620-4 ↗
24. Structure, bonding, and adhesion at the ZrC (1 0 0)/Fe (1 1 0) interface from first principles10.1016/j.susc.2004.04.022 ↗
25. Experimental and computational studies on propanone derivatives of quinoxalin-6-yl-4,5-dihydropyrazole as inhibitors of mild steel corrosion in hydrochloric acid10.1016/j.jcis.2019.11.097 ↗
26. Green corrosion inhibitor for oilfield application I: Electrochemical assessment of 2-(2-pyridyl) benzimidazole for API X60 steel under sweet environment in NACE brine ID19610.1016/j.corsci.2019.02.010 ↗
27. Synthesis and corrosion inhibition effects of quinazolin-(3H)-4-one derivatives containing long-chain pyridinium salts on carbon steel in 1.5 M HCl
28. A novel triazole-based cationic gemini surfactant: synthesis and effect on corrosion inhibition of carbon steel in hydrochloric acid10.1016/j.matchemphys.2004.11.022 ↗
29. Protection of carbon steel against corrosion in hydrochloric acid solution by some synthesized cationic surfactants
30. Preparation and corrosion resistance of Ni-Fe layer double hydroxides superhydrophobic film on carbon steel10.1016/j.colsurfa.2023.131501 ↗
31. Corrosion behavior of CoCrNi/mild steel medium entropy alloy thin films
32. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - part III
33. Effect of halide ions on the corrosion inhibition efficiency of different organic species - a review10.1016/j.jiec.2014.09.033 ↗
34. Imidazolium-derived polymeric ionic liquid as a green inhibitor for corrosion inhibition of mild steel in 1.0 M HCl: experimental and computational study10.1016/j.colsurfa.2019.124195 ↗
35. Evaluation of performance of corrosion inhibitors using adsorption isotherm models: an overview, Chemical Science
36. Electrochemical and isothermal adsorption studies on corrosion inhibition performance of β-cyclodextrin grafted polyacrylamide for X80 steel in oil and gas production10.1016/j.molstruc.2020.129737 ↗
37. Adsorption and corrosion inhibitive properties of P(2-aminobenzothiazole) on mild steel in hydrochloric acid media10.1007/s40090-015-0065-5 ↗
38. Adsorption and corrosion inhibitive properties of gemini surfactants in the series of hexanediyl-1,6-bis-(diethyl alkyl ammonium bromide) on aluminium in hydrochloric acid solution10.1016/j.colsurfa.2011.02.035 ↗
39. Electrochemical and theoretical quantum approaches on the inhibition of C1018 carbon steel corrosion in acidic medium containing chloride using some newly synthesized phenolic Schiff bases compounds
40. Experimental and theoretical (DFT&MC) studies for newly synthesized cationic amphiphilic substance based on a naphthol moiety as corrosion inhibitor for carbon steel during the pickling process10.1016/j.molliq.2021.115692 ↗
41. Delamination and selfassembly of layered double hydroxides for enhanced loading capacity and corrosion protection performance10.1016/j.apsusc.2018.08.109 ↗
42. A model for predicting size distribution and liquid drainage from micro-bubble surfactant multi-layer fluids using population balance10.1007/s00396-015-3678-5 ↗
43. Novel amide-based cationic surfactants as efficient corrosion inhibitors for carbon steel in HCl and H2SO4 media10.1007/s11743-012-1356-x ↗
44. Synthesis, characterization, and studies of the interfacial and anticorrosion properties of a ternary cationic ionic liquid on carbon steel in a molar concentration of hydrochloric acid: Experimental and computational insights10.1016/j.colsurfa.2023.132720 ↗
45. Corrosion inhibition of a new Schiff base derivative with two pyridine rings on Q235 mild steel in 1.0M HCl10.1016/j.jtice.2016.07.007 ↗
46. Review of atomic force microscopy applied to cell interactions with membranes10.1205/cherd05053 ↗