Low-energy ion beam erosion of Si with simultaneous co-deposition of metallic surfactants: Experimental and simulated data
Source abstract
Abstract
Ion beam erosion of Si under co-deposition circumstances supports the formation of surface patterns on the nano- and micrometer scale. To evaluate the effect of surfactant sputtering within a setup relevant for ultra precision surface finishing, this work is presented. We present data for samples prepared with Ar ion beam erosion, at low ion energy. Al, Cu, steel, Cr, Ni, Mo, Ti, Ta, Zn and Si were chosen as co-deposition material. Simultaneous irradiation of the co-deposition material and the Si samples were performed with a broad beam ion source. The structuring and pattern formation are discussed with SEM and AFM measurements. It was shown that the evolution of structures on the substrate is induced by the silicide-forming metals. This corresponds with a higher surface roughness. Whereas the non-silicide-forming metals did not show patterning, and accordingly, lower surface roughness. Measurements regarding the Si removal rate showed, that it depends on the co-deposition material. Supporting simulation data proposed that the effect of the co-deposition material on the Si removal is determined by the combination of sputtering and scattering properties of the co-deposition material. The ratio of scattered Ar ions to sputtered metal particles describes the effect on the removal change. For metals which tend to higher scattering, the removal is enhanced. This applies for most of the metals with higher atomic number. Whereas the metals with lower atomic number favor self-sputtering, which results in an decreased Si removal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ion-surface interactions and analysis · Integrated Circuits and Semiconductor Failure Analysis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Ultra-precision surface finishing by ion beam techniques10.1002/vipr.200700330 ↗
2. Large area smoothing of surfaces by ion bombardment: fundamentals and applications
3. Towards AR waveguides with refractive index 2.0 utilizing nanoimprint lithogrpahy
4. Reactive ion beam etch of slanted gratings for augmented reality
5. Strong anisotropy in surface kinetic roughening: Analysis and experiments10.1103/PhysRevB.86.245427 ↗
6. Pattern formation on Ge by low energy ion beam erosion10.1088/1367-2630/15/10/103029 ↗
7. Self-organized patterning on Si (001) by ion sputtering with simultaneous metal incorporation10.1007/s00339-011-6246-y ↗
8. Self-organized ordering of nanostructures produced by ion-beam sputtering10.1103/PhysRevLett.94.016102 ↗
9. Theory of ripple topography induced by ion bombardment10.1116/1.575561 ↗
10. Ripple coarsening on ion beam-eroded surfaces10.1186/1556-276X-9-439 ↗
11. Topography evolution mechanism on fused silica during low-energy ion beam sputtering10.1063/1.3549170 ↗
12. Surfactant-driven self-organized surface patterns by ion beam erosion10.1088/1367-2630/13/1/013033 ↗
13. Well-aligned nanocylinder formation in phase-separated metal-silicide–silicon and metal-Germanide–Germanium systems10.1002/adma.200700726 ↗
14. Surfactant sputtering10.1007/s00339-008-4678-9 ↗
15. Formation of ordered nanoscale semiconductor dots by ion sputtering10.1126/science.285.5433.1551 ↗
16. Reverse epitaxy of Ge: Ordered and faceted surface patterns10.1103/PhysRevLett.111.016101 ↗
17. Nanostructured carbide surfaces prepared by surfactant sputtering10.1016/j.nimb.2009.01.053 ↗
18. Self-organization of nanostructures in inorganic and organic semiconductor systems10.1002/adem.200600142 ↗
19. Nanostructures on fused silica surfaces produced by ion beam sputtering with Al co-deposition
20. Silicide induced ion beam patterning of Si (001)10.1088/0957-4484/25/11/115303 ↗
21. Is keV ion-induced pattern formation on Si (001) caused by metal impurities?10.1088/0957-4484/21/8/085301 ↗
22. Macko · 2011
23. Engler · 2015
24. Teichmann · 2015
25. Cornejo · 2011
26. Tuning the surface morphology in self-organized ion beam nanopatterning of Si(001) via metal incorporation: from holes to dots10.1088/0957-4484/19/35/355306 ↗
27. Depth profile investigation of the incorporated iron atoms during Kr+ ion beam sputtering on Si (001)10.1016/j.tsf.2012.12.055 ↗
28. Fundamentals of surfactant sputtering10.1016/j.nimb.2009.05.028 ↗
29. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
30. Characterization of an RF excited broad beam ion source operating with inert gases10.1063/5.0052758 ↗
31. https://www.imagemet.com/products_/spip/. (Accessed 10 October 2023).
32. In situ X-ray studies of native and Mo-seeded surface nanostructuring during ionbombardment of Si(100)
33. The role of phase separation for self-organized surface pattern formation by ion beam erosion and metal atom co-deposition10.1007/s00339-012-7285-8 ↗
34. Nanoscale metal-silicide films prepared by surfactant sputtering and analyzed by RBS10.1016/j.nimb.2010.02.110 ↗
35. Iron-assisted ion beam patterning of Si(001) in the crystalline regime10.1088/1367-2630/14/7/073003 ↗
36. Low temperature formation of copper rich silicides10.1016/j.intermet.2019.01.010 ↗
37. Ion-beam nanopatterning of silicon surfaces under co-deposition of non-silicide-forming impurities10.1103/PhysRevB.93.115430 ↗
38. Surface engineering with ion beams: from self-organized nanostructures to ultra-smooth surfaces10.1007/s00339-008-4516-0 ↗
39. Behrisch · 2007
40. Sputtering studies with the Monte Carlo Program TRIM.SP10.1007/BF00614759 ↗
41. Tutorial: The systematics of ion beam sputtering for deposition of thin films with tailored properties10.1063/1.5054046 ↗
42. Reactive ion beam sputtering of Ti: Influence of process parameters on angular and energy distribution of sputtered and backscattered particles
43. Ion beam sputter deposition of TiO2 films using oxygen ions10.1140/epjb/e2018-90293-3 ↗