Meniscus process optimization for smooth surface fabrication in Stereolithography
Source abstract
Abstract
Abstract In the layer-based additive manufacturing processes, it is well known that the surface finish is usually poor due to the stair-stepping effect. In our previous study, it was shown that the meniscus approach can be used in the Stereolithography process to achieve much better surface finish. A related challenge is how to optimize parameters such that the formed meniscuses can lead to high surface finish and accurate shape. In this paper, a systematic process planning method is presented for the Stereolithography process that is integrated with the meniscus approach. Process planning, parameters characterization and meniscus parameters optimization are presented with experimental verifications. To demonstrate the systematic process, surface profile simulation, meniscus database construction, meniscus forming parameter optimization, and shape accuracy prediction have been performed using a test case based on convex surfaces. A comparison between the experimental results with and without the process planning method is presented, illustrating the effectiveness of the developed meniscus optimization method in simultaneously controlling the shape and surface finish of fabricated objects. Subsequently the simulation results are also verified with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Revolutionary additive manufacturing: an overview
2. Stereolithography: Materials, Processes and Applications
3. Gibson · 2010
4. Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography10.1016/j.jmatprotec.2009.05.004 ↗
5. Development of dynamic masking rapid prototyping system for application in tissue engineering10.1108/13552540910925045 ↗
6. Mass production of 3-D microstructures using projection microstereolithography10.1007/s12206-007-1031-8 ↗
7. Development of a high-resolution rapid prototyping system for small size objects10.1007/s00170-005-0257-9 ↗
8. A review of process planning techniques in layered manufacturing10.1108/13552540010309859 ↗
9. Novel stereolithography system for small size objects10.1108/13552540610637228 ↗
10. Fabrication of microfilters using excimer laser micromachining and testing of pressure drop10.1088/0960-1317/19/2/025025 ↗
11. High-speed fabrication of microchannels using line-based laser induced plasma micromachining
12. Orthogonal slicing for additive manufacturing10.1016/j.cag.2013.05.011 ↗
13. Surface roughness analysis, modelling and prediction in selective laser melting10.1016/j.jmatprotec.2012.11.011 ↗
14. Dithering method for improving the surface quality of a microstructure in projection microstereolithography10.1007/s00170-010-2748-6 ↗
15. Process planning method for mask projection micro-stereolithography10.1108/13552540710736759 ↗
16. Smooth surface fabrication in mask projection based Stereolithography10.1016/j.jmapro.2012.09.003 ↗
17. Prediction of equilibrium shapes and pedestal heights of solder joints for leadless chip components
18. Study on the improvement of surface roughness of complex model created by three dimensional photofabrication–proposal of lift up irradiation method10.2493/jjspe.61.233 ↗
19. Jacobs · 1996
20. Layer depth-normal images for complex geometries – part one: accurate modeling and adaptive sampling
21. Uniform offsetting of polygonal model based on layered depth-normal images10.1016/j.cad.2010.09.002 ↗
22. Solid modeling of polyhedral objects by layered depth-normal images on the GPU10.1016/j.cad.2010.02.001 ↗
23. Efficient slicing procedure based on adaptive layer depth normal image10.1016/j.cad.2011.06.007 ↗
24. Model to determine the depth of a diffusion layer by normal indentations to the surface10.1016/j.surfcoat.2007.12.010 ↗