journal article·2025-01Open access

Material extrusion additive manufacturing of recycled discontinuous carbon fibre reinforced thermoplastic composites with high fibre efficiency

Jiang Wu, Pengyue Guo, Hao Zhang, Tian Mai, Ka Zhang, Aonan Li, Yahui Lyu, Haoqi Zhang, Dongmin Yang

Abstract

The study proposes a novel method, named angled feeding extrusion (AFE), for material extrusion additive manufacturing (MEX AM) of discontinuous recycled carbon fibre (rCF) reinforced thermoplastic composites with high fibre efficiency. The AFE system is also integrated with a 5-axis printer to enable the fabrication of complex structures. Characterisation of fibre morphology and structure is conducted using X-ray computed microtomography (μCT), and the mechanical properties of the AFE-manufactured rCF composites are investigated through mechanical testing. The results show that AFE demonstrates effectiveness in reducing the fabrication difficulty of rCF composites with high fibre efficiency, fibre efficiency encompasses factors such as fibre fraction, length, and orientation. Moreover, rCF composites additively manufactured by the AFE system achieve rCF lengths of up to 3.8 mm and a fibre volume fraction of 30.3%. The tensile strength and modulus are 178 MPa and 9.9 GPa respectively. It exhibits a significant improvement of 90% and 254% in tensile strength and modulus compared to short fibre reinforced composites. Similarly, compressive tests of AFE-manufactured composite rings show an increase of 80% in ultimate compressive load.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Comprehensive investigation of reclaimed carbon fibre reinforced polyamide (rCF/PA) filaments and FDM printed composites
2. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties10.1177/0021998316646169 ↗
3. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling10.1016/j.compositesb.2015.06.013 ↗
4. S. Francis, The state of recycled carbon fiber, 2019. 〈https://www.compositesworld.com/articles/the-state-of-recycled-carbon-fiber〉.
5. Global Recycled Carbon Fiber Market (2021 to 2026) - Increasing Use of Recycled Carbon Fiber in the Growing Aerospace Industry Presents Opportunities - ResearchAndMarkets.com, 2022. 〈https://www.businesswire.com/news/home/20220328005546/en/Global-Recycled-Carbon-Fiber-Market-2021-to-2026---Increasing-Use-of-Recycled-Carbon-Fiber-in-the-Growing-Aerospace-Industry-Presents-Opportunities---ResearchAndMarkets.com〉.
6. A review on filament materials for fused filament fabrication
7. Optimized design of steel fibres reinforced ultra-high performance concrete (UHPC) composites: towards to dense structure and efficient fibre application10.1016/j.conbuildmat.2020.121698 ↗
8. The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites10.1016/j.carbpol.2007.06.019 ↗
9. Highly oriented carbon fiber–polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
10. High strength carbon-fiber reinforced polyamide 6 composites additively manufactured by screw-based extrusion10.1016/j.compscitech.2022.109707 ↗
11. Advances in fused deposition modeling of discontinuous fiber/polymer composites10.1016/j.cossms.2020.100867 ↗
12. Additively manufactured fiber-reinforced composites: a review of mechanical behavior and opportunities10.1016/j.jmst.2021.11.063 ↗
13. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites10.1016/S1359-835X(00)00068-3 ↗
14. An investigation into 3D printing of fibre reinforced thermoplastic composites
15. Fabrication and characterisation of aligned discontinuous carbon fibre reinforced thermoplastics as feedstock material for fused filament fabrication10.3390/ma13204671 ↗
16. Analysis of the dependence of the tensile behaviour of a short fibre reinforced polyamide upon fibre volume fraction, length and orientation10.1016/j.proeng.2011.04.352 ↗
17. Extrusion width critically affects fibre orientation in short fibre reinforced material extrusion additive manufacturing
18. Batch production and fused filament fabrication of highly aligned discontinuous fibre thermoplastic filaments
19. Material extrusion additive manufacturing of recycled discontinuous carbon fibre reinforced thermoplastic composites with different fibre lengths: through-process microstructural evolution and mechanical property loss
20. Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing
21. Fibre bridging and nozzle clogging in 3D printing of discontinuous carbon fibre-reinforced polymer composites: coupled CFD-DEM modelling10.1007/s00170-021-07913-7 ↗
22. Full-process multi-scale morphological and mechanical analyses of 3D printed short carbon fiber reinforced polyetheretherketone composites10.1016/j.compscitech.2023.109999 ↗
23. Discrete particle simulation of particulate systems: a review of major applications and findings10.1016/j.ces.2008.08.006 ↗
24. P. Guo, H. Zhang, Y. Wu, X. An, S. Jiang, K. Wu, J. Wu, D. Yang, CFD-DEM Investigation on Effects of Fiber Deformation during 3D Printing Process Based on Fused Deposition, Industrial & Engineering Chemistry Research (2023).10.1021/acs.iecr.3c00240 ↗
25. 3D short fibre orientation for universal structures and geometries in material extrusion additive manufacturing
26. Fibre flow and void formation in 3D printing of short-fibre reinforced thermoplastic composites: an experimental benchmark exercise
27. Computational study of granular shear flows of dry flexible fibres using the discrete element method10.1017/jfm.2015.289 ↗
28. 5-axis multi-material 3D printing of curved electrical traces
29. Short fibre composites
30. Are classical fibre composite models appropriate for material extrusion additive manufacturing? A thorough evaluation of analytical models
31. Comparison of strength and Young modulus of aligned discontinuous fibre PLA composites obtained experimentally and from theoretical prediction models10.1016/j.compstruct.2018.10.057 ↗
32. Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum10.1016/0022-5096(65)90035-9 ↗
33. Mechanical properties of natural-fibre-mat- reinforced thermoplastics based on flax fibres and polypropylene10.1023/A:1026590124038 ↗
34. Tensile properties prediction of natural fibre composites using rule of mixtures: a review10.1177/0731684418813650 ↗
35. Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites10.1016/j.jclepro.2016.11.139 ↗
36. RepRapable recyclebot: open source 3-D printable extruder for converting plastic to 3-D printing filament10.1016/j.ohx.2018.e00026 ↗
37. Investigation of a short carbon fibre-reinforced polyamide and comparison of two manufacturing processes: fused deposition modelling (FDM) and polymer injection moulding (PIM)10.3390/ma13030672 ↗
38. Extrusion nozzle design and print parameter selections for 3D concrete printing10.1016/j.cemconcomp.2023.104939 ↗
39. Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing
40. Experimental validation of a numerical model for the strand shape in material extrusion additive manufacturing
41. DcAFF (Discontinuous Aligned Fibre Filament) – Mechanical properties investigation on multilayer 3D printed parts
42. Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
43. ASTM, ASTM 3039-D3039M-14 StandardTest Method for Tensile Properties of Polymer Matrix Composite Materials, West Chonshohcken, 2014.
44. Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications10.1016/j.compositesb.2019.01.085 ↗
45. Novel method for determination of critical fiber length in short fiber carbon/carbon composites by double lap joint10.1016/j.compositesb.2013.05.026 ↗
46. Thermo ScientificTM AvizoTM Software 9 User’s Guide, 2019. 〈https://assets.thermofisher.com/TFS-Assets/MSD/Product-Guides/user-guide-avizo-software.pdf〉.
47. High-strength carbon fiber-reinforced polyether-ether-ketone composites with longer fiber retention length manufactured via screw extrusion-based 3D printing
48. Effects of initial fiber length and fiber length distribution on the properties of carbon-fiber-reinforced-polypropylene composites10.1177/0731684412452678 ↗
49. 3D printing of short fiber reinforced composites via material extrusion: fiber breakage
50. Comparison of 2D fiber network orientation measurement methods10.1002/jbm.a.31847 ↗
51. Analysis of fibre orientation distribution in short fibre reinforced polymers: a comparison between optical and tomographic methods10.1016/j.compscitech.2012.08.018 ↗
52. Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales
53. In-situ 3D fracture propagation of short carbon fiber reinforced polymer composites10.1016/j.compscitech.2019.107788 ↗