journal article·2016-03Open access

Different methods to alter surface morphology of high aspect ratio structures

M. Leber, M.M.H. Shandhi, A. Hogan, F. Solzbacher, R. Bhandari, S. Negi

Abstract

In various applications such as neural prostheses or solar cells, there is a need to alter the surface morphology of high aspect ratio structures so that the real surface area is greater than geometrical area. The change in surface morphology enhances the devices functionality. One of the applications of altering the surface morphology is of neural implants such as the Utah electrode array (UEA) that communicate with single neurons by charge injection induced stimulation or by recording electrical neural signals. For high selectivity between single cells of the nervous system, the electrode surface area is required to be as small as possible, while the impedance is required to be as low as possible for good signal to noise ratios (SNR) during neural recording. For stimulation, high charge injection and charge transfer capacities of the electrodes are required, which increase with the electrode surface. Traditionally, researchers have worked with either increasing the roughness of the existing metallization (Platinum grey, black) or other materials such as Iridium Oxide and PEDOT. All of these previously investigated methods lead to more complicated metal deposition processes that are difficult to control and often have a critical impact on the mechanical properties of the metal films. Therefore, a modification of the surface underneath the electrode's coating will increase its surface area while maintaining the standard and well controlled metal deposition process. In this work, the surfaces of the Silicon micro-needles were engineered by creating a defined microstructure on the electrodes surface using several methods such as Laser ablation, focused ion beam, sputter etching, reactive ion etching (RIE) and deep reactive ion etching (DRIE). The surface modification processes were optimized for the high aspect ratio Silicon structures of the UEA. The increase in real surface area while maintaining the geometrical surface area was verified using scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The best results were obtained by DRIE induced surface morphology. Decreases in impedance values of electrodes up to 76 % indicate the successful surface engineering of the high aspect ratio Silicon structures.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Neuroscience and Neural Engineering · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Black nonreflecting silicon surfaces for solar cells10.1063/1.2204573 ↗
2. Nanostructured black silicon and the optical reflectance of graded-density surfaces10.1063/1.3152244 ↗
3. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
4. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
5. Terahertz emission from black silicon10.1063/1.2978096 ↗
6. Electrowetting properties of micro/nanostructured black silicon10.1021/la101138u ↗
7. Porous silicon biosensors on the advance10.1016/j.tibtech.2008.12.004 ↗
8. Silicon microtechnology and microstructures in separation science10.1016/S0021-9673(98)00544-5 ↗
9. Culture of neural cells on silicon wafers with nano-scale surface topograph10.1016/S0165-0270(02)00181-4 ↗
10. Bactericidal activity of black silicon10.1038/ncomms3838 ↗
11. Neural stimulation and recording electrodes10.1146/annurev.bioeng.10.061807.160518 ↗
12. Nanostructured porous silicon scaffolds for improved biocompatibility of thin film microelectrodes10.1109/IEMBS.2003.1280961 ↗
13. Formation of three-dimensional microstructures by electrochemical etching of silicon10.1063/1.1401792 ↗
14. The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile10.1088/0960-1317/5/2/015 ↗
15. Efficient nanostructure formation on silicon surfaces and in indium tin oxide thin films by sub-15 fs pulsed near-infrared laser light10.1016/j.phpro.2011.03.100 ↗
16. Incubation and nanostructure formation on n- and p-type Si(100) and Si(111) at various doping levels induced by sub-nanojoule femto- and picosecond near-infrared laser pulses10.1016/j.apsusc.2014.06.140 ↗
17. Direct femtosecond laser surface nano/microstructuring and its applications10.1002/lpor.201200017 ↗
18. Technology insight: future neuroprosthetic therapies for disorders of the nervous system10.1038/ncpneuro0556 ↗
19. Neuronal ensemble control of prosthetic devices by a human with tetraplegia10.1038/nature04970 ↗
20. A silicon-based, three-dimensional neural interface: manufacturing processes for an intracortical electrode array10.1109/10.83588 ↗
21. Aryan · 2014
22. Improved chronic neural stimulation using high surface area platinum electrodes
23. In vitro comparison of sputtered iridium oxide and platinum-coated neural implantable microelectrode arrays10.1088/1748-6041/5/1/015007 ↗
24. In vitro electrical properties for iridium oxide versus titanium nitride stimulating electrodes10.1109/TBME.2002.805487 ↗
25. Experimental and theoretical characterization of implantable neural microelectrodes modified with conducting polymer nanotubes10.1016/j.biomaterials.2007.11.022 ↗
26. Interfacing conducting polymer nanotubes with the central nervous system: chronic neural recording using poly(3 4-ethylenedioxythiophene) nanotubes10.1002/adma.200900887 ↗
27. Surface modification of neural recording electrodes with conducting polymer/biomolecule blends10.1002/1097-4636(200108)56:2<261::AID-JBM1094>3.0.CO;2-I ↗
28. Nanostructured electrodes for improved neural recording10.1557/PROC-729-U4.11 ↗
29. A novel technique for increasing charge injection capacity of neural electrodes for efficacious and safe neural stimulation
30. Encapsulation of an integrated neural interface device with Parylene C10.1109/TBME.2008.2002155 ↗
31. Laser ablation of silicon and copper targets. Experimental and finite elements studies10.1007/s00339-004-2656-4 ↗
32. Madou · 2011 · 163
33. Maskless method to selectively etch Parylene-C from high aspect ratio neural devices
34. A review of focused ion beam milling techniques for TEM specimen preparation10.1016/S0968-4328(99)00005-0 ↗
35. Madou · 2011 · 197
36. A novel surface modification method to achieve low impedance neural microelectrode arrays
37. Black silicon: fabrication methods, properties and solar energy applications10.1039/C4EE01152J ↗
38. Lithography-free silicon micro-pillars as catalyst supports for microfabricated fuel cell applications10.1016/j.elecom.2006.05.020 ↗
39. Formation of silicon nanopores and nanopillars by a maskless deep reactive ion etching process
40. Madou · 2011 · 175