journal article·2014-01

TiO2 anatase films obtained by direct liquid injection atomic layer deposition at low temperature

L. Avril, S. Reymond-Laruinaz, J.M. Decams, S. Bruyère, V. Potin, M.C. Marco de Lucas, L. Imhoff

Publisher page

Abstract

Abstract TiO 2 thin films were grown by direct liquid injection atomic layer deposition (DLI-ALD) with infrared rapid thermal heating using titanium tetraisopropoxide and water as precursors. This titanium tetraisopropoxide/water process exhibited a growth rate of 0.018 nm/cycle in a self-limited ALD growth mode at 280 °C. Scanning electron microscopy and atomic force microscopy analyses have shown a smooth surface with a low roughness. XPS results demonstrated that the films were pure and close to the TiO 2 stoichiometric composition in depth. Raman spectroscopy revealed that the films were crystallized to the anatase structure in the as-deposited state at low temperature without necessity of high temperature annealing. Results obtained demonstrate that the liquid injection ALD is an efficient method of elaborating titanium oxide films using titanium tetraisopropoxide as precursor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Excimer laser sputtering deposition of TiO2 optical coating for solar cells10.1016/0169-4332(94)00407-2 ↗
2. TiO2 thin films as protective material for transparent-conducting oxides used in Si thin film solar cells10.1016/j.solmat.2006.05.001 ↗
3. Preparation of anatase TiO2 thin films for dye-sensitized solar cells by DC reactive magnetron sputtering technique10.1016/j.tsf.2010.08.027 ↗
4. Electrical properties of TiO2-based MIM capacitors deposited by TiCl4 and TTIP based atomic layer deposition processes10.1016/j.mee.2011.03.059 ↗
5. Microstructure and phase transition of biocompatible titanium oxide film on titanium by plasma discharging10.1016/j.jallcom.2008.09.122 ↗
6. Surface preparation influence on the initial stages of MOCVD growth of TiO2 thin films10.1016/j.tsf.2005.12.237 ↗
7. Structural analysis of W3O/WO3 and TiO/TiO2 periodic multilayer thin films sputter deposited by the reactive gas pulsing process10.1016/j.tsf.2011.10.180 ↗
8. Elastic behaviour of titanium dioxide films on polyimide substrates studied by in situ tensile testing in a X-ray diffractometer10.1016/j.nimb.2009.09.034 ↗
9. Atomic layer deposition of TiO2 thin films from TiI4 and H2O10.1016/S0169-4332(02)00497-X ↗
10. Atomic layer deposition of metal oxides on pristine and functionalized graphene10.1021/ja8023059 ↗
11. Low-temperature Al2O3 atomic layer deposition10.1021/cm0304546 ↗
12. Effect of Na diffusion from glass substrate on the microstructural and photocatalytic properties of post-annealed TiO2 films synthesised by reactive sputtering10.1016/j.surfcoat.2012.06.012 ↗
13. Effect of barrier layers on the properties of indium tin oxide thin films on soda lime glass substrates10.1016/j.tsf.2009.01.149 ↗
14. Self-limiting nature in atomic-layer epitaxy of rutile thin films from TiCl4 and H2O on sapphire (001) substrates10.1016/j.jcrysgro.2010.12.003 ↗
15. Thermal properties of TiO2 films grown by atomic layer deposition10.1016/j.tsf.2012.04.008 ↗
16. Morphology and structure of TiO2 thin films grown by atomic layer deposition10.1016/0022-0248(94)00874-4 ↗
17. Titanium isopropoxide as a precursor for atomic layer deposition: characterization of titanium dioxide growth process10.1016/S0169-4332(00)00274-9 ↗
18. Correlation between bioactivity and structural properties of titanium dioxide coatings grown by atomic layer deposition10.1016/j.apsusc.2011.11.082 ↗
19. Atomic layer deposition of photocatalytic TiO2 thin films from titanium tetramethoxide and water10.1002/cvde.200306289 ↗
20. Vanadium oxides prepared by liquid injection MOCVD using vanadyl acetylacetonate10.1016/j.surfcoat.2004.08.037 ↗
21. Direct liquid injection chemical vapor deposition of nickel nitride films and their reduction to nickel films10.1021/cm903636j ↗
22. Nanostructured ZrO2 membranes prepared by liquid injection chemical vapor deposition10.1016/j.micromeso.2012.06.057 ↗
23. SiC coatings grown by liquid injection chemical vapor deposition using single source metal-organic precursors10.1016/j.surfcoat.2012.10.070 ↗
24. Direct liquid injection MOCVD growth of TiO2 films using the precursor Ti(md)(dmae)210.1051/jp4:2001367 ↗
25. Liquid injection atomic layer deposition of silver nanoparticles10.1088/0957-4484/21/40/405602 ↗
26. Liquid injection ALD and MOCVD of lanthanum aluminate using a bimetallic alkoxide precursor10.1039/b609129f ↗
27. Photocatalytic degradation of dyes by using a membrane reactor10.1016/j.cep.2004.01.008 ↗
28. Destruction of malodorous compounds using heterogeneous photocatalysis10.1021/es980404f ↗
29. Photocatalytic activity of amorphous-anatase mixture of titanium(IV) oxide particles suspended in aqueous solutions10.1021/jp962702+ ↗
30. Photocatalytic activities of pure rutile particles isolated from TiO2 powder by dissolving the anatase component in HF solution10.1021/jp003211z ↗
31. Role of the crystallite phase of TiO2 in heterogeneous photocatalysis for phenol oxidation in water10.1021/jp993819b ↗
32. Atomic layer deposition of TiO2 from TDMAT or Ti isopropoxide precursors and H2O10.1063/1.2798384 ↗
33. Titanium isopropoxide as a precursor in atomic layer epitaxy of titanium dioxide thin films10.1021/cm00032a023 ↗
34. Investigation of ion pair formation in the triphenylmethyl chloride trimethylaluminium system as a model for the activation of olefin polymerization catalyst10.1016/j.vibspec.2006.07.012 ↗
35. EMS – a software package for electron difffraction analysis and HREM simulation in materials science10.1016/0304-3991(87)90080-5 ↗
36. Characteristics of TiO2 films prepared by ALD with and without plasma10.1149/1.1805502 ↗
37. Atomic layer deposition of TiO2 films on particles in a fluidized bed reactor10.1016/j.powtec.2008.01.025 ↗
38. Atomic layer deposition chemistry: recent developments and future challenges10.1002/anie.200301652 ↗
39. Atomic layer deposition of tantalum oxide thin films for their use as diffusion barriers in microelectronic devices10.1016/j.mee.2009.06.015 ↗
40. Reactive direct current magnetron sputtered TiO2 thin films with amorphous to crystalline structures10.1016/j.tsf.2007.12.150 ↗
41. Thermal effects on the growth by metal organic chemical vapour deposition of TiO2 thin films on (100) GaAs substrates10.1016/S0257-8972(01)01586-9 ↗
42. Characteristics of TiOx films prepared by chemical vapor deposition using tetrakis-dimethyl-amido-titanium and water10.1016/j.tsf.2005.07.121 ↗
43. Atomic layer deposition of TiO2 nanotubes and its improved electrostatic capacitance10.1016/j.elecom.2009.11.026 ↗
44. Surface reaction mechanisms during plasma-assisted atomic layer deposition of titanium dioxide10.1021/jp903669c ↗
45. Structural properties of the titanium dioxide thin films grown by atomic layer deposition at various numbers of reaction cycles10.1016/j.apsusc.2010.06.061 ↗
46. Black-body approximation to the continuous X-ray spectra10.1016/j.sab.2005.09.008 ↗
47. Modelling of an infrared halogen lamp in a rapid thermal system10.1016/j.ijthermalsci.2010.03.003 ↗
48. Validation of a rapid thermal processing model in steady-state10.1016/j.mee.2008.07.012 ↗
49. Dispersion of the optical constant of quartz and polymethylmethacrylate glasses in a wide spectral range10.1016/S0030-4018(00)01152-4 ↗
50. Infrared spectra of large H2O clusters: new understanding of the elusive bending mode of ice10.1021/jp003455j ↗
51. Nonlinear absorption in silicon and the prospects of mid-infrared silicon Raman lasers10.1002/pssa.200622062 ↗
52. Optical study of titanium dioxide thin films prepared by R.F. sputtering
53. A comparison of different spray chemical vapour deposition methods for the production of undoped ZnO thin films10.1016/j.tsf.2009.01.157 ↗