journal article·2016-07

Adhesion enhancement of titanium nitride coating on aluminum casting alloy by intrinsic microstructures

Chuong L. Nguyen, Andrew Preston, Anh T.T. Tran, Michelle Dickinson, James B. Metson

Publisher page

Abstract

Abstract Aluminum casting alloys have excellent castability, high strength and good corrosion resistance. However, the presence of silicon in these alloys prevents surface finishing with conventional methods such as anodizing. Hard coating with titanium nitride can provide wear and corrosion resistances, as well as the aesthetic finish. A critical factor for a durable hard coating is its bonding with the underlying substrate. In this study, a titanium nitride layer was coated on LM25 casting alloy and a reference high purity aluminum substrate using Ion Assisted Deposition. Characterization of the coating and the critical interface was carried out by a range of complementing techniques, including SIMS, XPS, TEM, SEM/EDS and nano-indentation. It was observed that the coating on the aluminum alloy is stronger compared to that on the pure aluminum counterpart. Silicon particles in the alloy offers the reinforcement though mechanical interlocking at microscopic level, even with nano-scale height difference. This reinforcement overcomes the adverse effect caused by surface segregation of magnesium in aluminum casting alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Wernick · 1987 · vol. 1
2. Colour control of titanium nitride coatings produced by reactive magnetron sputtering at temperature less than 100degrees C10.1016/S0257-8972(99)00076-6 ↗
3. Differential ion beam sputtering of segregated phases in aluminum casting alloys10.1016/j.apsusc.2012.11.033 ↗
4. Effect of magnesium content on the high temperature adhesion of Al-Mg alloys to steel surfaces10.1016/j.surfcoat.2009.01.041 ↗
5. Ion plating and ion beam assisted deposition
6. Surface characterisation of plasma-nitrided titanium: an XPS study10.1016/0169-4332(94)00545-1 ↗
7. Characterization of TiN coatings and of the TiN/Si interface by X-ray photoelectron-Spectroscopy and auger-Electron spectroscopy10.1016/0169-4332(93)90241-3 ↗
8. Phase-oriented surface segregation in an aluminium casting alloy10.1016/j.apsusc.2008.12.025 ↗
9. Warmuzek · 2004
10. ASM handbook
11. Evaluation of hard TiN coatings by depth sensing indentation and scratch testing methods10.1023/A:1008692410760 ↗
12. The influence of substrate hardness on the response of TiN-coated steels to surface deformation10.1016/0040-6090(89)90561-0 ↗
13. On the hardness of coated systems10.1016/S0257-8972(97)00522-7 ↗
14. The oxidation of rolled and heat treated Al-Mg alloys10.1016/0378-5963(84)90023-0 ↗
15. Magnesium diffusion, surface segregation and oxidation in Al-Mg alloys10.1007/BF01058110 ↗