journal article·2016-03

A proposed mechanism for investigating the effect of porous silicon buffer layer on TiO2 nanorods growth

N. Rahmani, R.S. Dariani, M. Rajabi

Publisher page

Abstract

Abstract In this study, we have synthesized TiO 2 nanorods (NRs) on silicon and porous silicon (PS) substrates by hydrothermal method. The PS substrates with different porosities were fabricated by electrochemical anodization on silicon. According to the field emission electron microscopy images, TiO 2 NRs grown on PS substrates have a better growth compared to those grown on silicon. Also increasing substrate porosity leads to an increase in density of the NRs. Atomic force microscopy observation demonstrates that porous layer formation due to etching of silicon surface leads to an increase of its roughness. Results indicate surface roughness evolution with porosity increasing enhances TiO 2 nucleation on substrate and thus increases TiO 2 NRs density. We propose a growth mechanism to explain how we can control the local surface chemical potential and thus the nucleation and alignment of TiO 2 NRs by surface roughness variation. Also, photoluminescence studies show a red-shift in band gap energy of NRs compared to that of common bulk TiO 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Silicon Nanostructures and Photoluminescence · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. General Strategy to Construct Hierarchical TiO2 Nanorod Arrays coupling with Plasmonic Resonance for Dye-sensitized Solar Cells10.1016/j.electacta.2015.05.102 ↗
2. Highly sensitive and selective room-temperature formaldehyde sensors using hollow TiO2 microspheres10.1016/j.snb.2015.05.031 ↗
3. Review of material design and reactor engineering on TiO2 photocatalysis for CO2 reduction10.1016/j.jphotochemrev.2015.06.001 ↗
4. Hydrogen-Treated TiO2 Nanowire Arrays for Photoelectrochemical Water Splitting10.1021/nl201766h ↗
5. pH-driven phase separation: Simple routes for fabricating porous TiO2 film with superhydrophilic and anti-fog properties10.1016/j.ceramint.2015.02.081 ↗
6. On the Mechanism of Protein Adsorption onto Hydroxylated and Nonhydroxylated TiO2 Surfaces10.1021/jp1037156 ↗
7. The effects of porous silicon on the crystalline properties of ZnO thin films10.1016/j.jpcs.2009.05.004 ↗
8. Porous Si (111) and Si (100) as an intermediate buffer layer for nanocrystalline InN films10.1016/j.jallcom.2009.01.085 ↗
9. Pulsed laser deposition growth of rutile TiO2 nanowires on Silicon substrates10.1016/j.apsusc.2014.05.123 ↗
10. Preparation of monodispersed PbS quantum dots on nanoporous semiconductor thin film by two-phase method10.1016/j.jallcom.2014.01.069 ↗
11. Microwave assisted hydrothermal synthesis of single crystalline ZnO nanorods for gas sensor application10.1016/j.matlet.2011.10.029 ↗
12. Ge growth on porous silicon: The effect of buffer porosity on the epilayer crystalline quality10.1063/1.4894863 ↗
13. GaAs-growth on porous silicon
14. Characterization and fabrication of ZnSe epilayer on porous silicon substrate10.1016/S0040-6090(00)01065-8 ↗
15. Growth and characterization of aligned ZnO nanorods synthesized on porous silicon10.1016/j.matlet.2013.01.127 ↗
16. Synthesis and characterization of a stable, label-free optical biosensor from TiO2-coated porous silicon10.1016/j.bios.2013.12.016 ↗
17. Three-Dimensional High-Density Hierarchical Nanowire Architecture for High-Performance Photoelectrochemical Electrodes10.1021/nl201823u ↗
18. Sol–gel synthesized Titania nanoparticles deposited on porous polycrystalline silicon: Improved carbon dioxide sensor properties10.1016/j.mssp.2014.05.035 ↗
19. Strain-related phenomena in TiO2 nanostructures spin-coated on porous silicon substrate10.1016/j.spmi.2015.05.048 ↗
20. The influence of surface roughness on electrical conductance of thin Cu films: An ab initio study10.1063/1.2937188 ↗
21. Influence of self-affine roughness on the friction coefficient of rubber at high sliding velocity10.1103/PhysRevB.70.195409 ↗
22. Influence of surface roughness on the adhesion of elastic films10.1103/PhysRevE.67.021604 ↗
23. Porosity-dependent fractal nature of the porous silicon surface10.1063/1.4926460 ↗
24. Growth of Oriented Single-Crystalline Rutile TiO2 Nanorods on Transparent Conducting Substrates for Dye-Sensitized Solar Cells10.1021/ja8078972 ↗
25. Read · 1953
26. Cao · 2011
27. Effect of surface roughness on nucleation and growth of vanadium pentoxide nanowires10.1016/j.apsusc.2011.11.120 ↗
28. Growth of Submicrometer-Scale Rectangular Parallelepiped Rutile TiO2 Films in Aqueous TiCl3 Solutions under Hydrothermal Conditions10.1021/ja048820p ↗
29. Surfactant free most probable TiO2 nanostructures via hydrothermal and its dye sensitized solar cell properties10.1038/srep03004 ↗
30. Electronic band structure of titanium dioxide10.1103/PhysRevB.15.3229 ↗
31. Ab-initio Electronic and Structural Properties of Rutile Titanium Dioxide10.7567/JJAP.50.101103 ↗
32. Defect study of TiO2 nanorods grown by a hydrothermal method through photoluminescence spectroscopy10.1016/j.jlumin.2014.08.035 ↗
33. Tailoring luminescence properties of TiO2 nanoparticles by Mn doping10.1016/j.jlumin.2012.12.011 ↗
34. Controlled Growth of High-Quality TiO2 Nanowires on Sapphire and Silica10.1088/0957-4484/17/17/006 ↗
35. Microscopic origin of lattice contraction and expansion in undoped rutile TiO2 nanostructures10.1088/0022-3727/47/21/215302 ↗
36. Characterization of indirect and direct interband transitions of anatase TiO2 by thermoreflectance spectroscopy10.1063/1.2975846 ↗
37. Is the Band Gap of Pristine TiO2 Narrowed by Anion- and Cation-Doping of Titanium Dioxide in Second-Generation Photocatalysts?10.1021/jp065659r ↗
38. Enhancement of optical absorption by modulation of the oxygen flow of TiO2 films deposited by reactive sputtering10.1063/1.4724334 ↗
39. Plasmonic light harvesting of dye sensitized solar cells by Au-nanoparticle loaded TiO2 nanofibers10.1039/C3TA13246C ↗