Fretting fatigue behaviors and surface integrity of Ag-TiN soft solid lubricating films on titanium alloy
Source abstract
Abstract
Abstract Titanium alloys are widely used in industrial fields because of their superior characteristics, but they also have disadvantages leading to fretting fatigue (FF) damage. The silver-based composite films were deposited on a Ti6Al4V alloy substrate using ion-assisted magnetron sputtering for improving the fretting fatigue (FF) resistance of a Ti6Al4V alloy. The surface morphology was characterized by atomic force microscopy (AFM), and micro-structure was characterized by X-ray photoelectron spectroscopy measurements (XPS), X-ray diffractometry (XRD), and transmission electron microscopy (TEM), respectively. The bonding strength and toughness of films were analyzed using a repeated press–press test system that was manufactured in-house. The FF resistance of titanium alloy with the silver-based composite films was investigated using home-made FF devices. The results showed that the FF resistance of the titanium alloy was improved by the Ag-TiN composite films, which were fabricated with an Ag solid lubricating film doped with a hard TiN phase (60–80 at.% Ag). This is attributed to the fact that the composite films had better comprehensive strength-toughness behavior, friction lubrication property, and high bonding strength. However, when the atomic fraction of Ag in the composite film was larger than 90%, it became difficult to form the TiN phase, and it failed to improve the comprehensive strength-toughness behavior of the composite film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy10.1016/j.apsusc.2014.06.006 ↗
2. Effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components10.1016/j.wear.2018.12.001 ↗
3. An evaluation of the competition between wear and crack initiation in fretting conditions for Ti-6Al-4V alloy10.1016/j.wear.2015.03.010 ↗
4. Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification10.1016/j.surfcoat.2012.06.046 ↗
5. Fretting wear of a TiN PVD coating under variable relative humidity conditions-development of a ‘composite’ wear law10.1016/j.surfcoat.2007.07.103 ↗
6. The structure and tribological behaviors of CrN and Cr-Ti-N coatings10.1016/j.apsusc.2007.02.061 ↗
7. The application of TiSiN/TiAlN coatings in the mitigation of fretting wear in push fit joints10.1016/j.wear.2019.01.037 ↗
8. High temperature fretting wear of a Ti alloy/CuNiIn contact10.1016/j.surfcoat.2008.08.043 ↗
9. An effective friction energy density approach to predict solid lubricant friction endurance: application to fretting wear10.1016/j.wear.2014.07.009 ↗
10. Improvement of the fretting fatigue and fretting wear of Ti6Al4V by duplex surface modification10.1016/S0257-8972(99)00279-0 ↗
11. Nanocomposite Ag:TiN thin films for dry biopotential electrodes10.1016/j.apsusc.2013.07.154 ↗
12. PVD-grown antibacterial Ag-TiN films on piezoelectric PVDF substrates for sensor applications10.1016/j.surfcoat.2015.09.057 ↗
13. Accelerated bacterial reduction on Ag-TaN compared with Ag-ZrN and Ag-TiN surfaces10.1016/j.apcatb.2015.03.032 ↗
14. Effect of TiN/Ti composite coating and shot peening on fretting fatigue behavior of TC17 alloy at 350 °C10.1016/j.surfcoat.2009.02.058 ↗
15. Characterization and mechanical properties investigation of TiN-Ag films onto Ti-6Al-4V10.1016/j.apsusc.2016.01.005 ↗
16. Chemical and structural characterization of ZrCNAg coatings: XPS, XRD and Raman spectroscopy10.1016/j.apsusc.2015.03.161 ↗
17. A study of the antimicrobial and tribological properties of TiN/Ag nanocomposite coatings10.1016/j.surfcoat.2009.05.012 ↗
18. Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings10.1016/j.surfcoat.2010.07.029 ↗
19. XPS investigations of tribolayers formed on TiN and (Ti,Re)N coatings10.1016/j.apsusc.2014.12.023 ↗
20. An overview of the potential of quantitative coating adhesion measurement by scratch testing[J]10.1016/j.triboint.2005.04.013 ↗