journal article·2011-12

Electrospun cross linked rosin fibers

Woo-il Baek, R. Nirmala, Nasser A.M. Barakat, Mohamed H. El-Newehy, Salem S. Al-Deyab, Hak Yong Kim

Applied Surface Science· Volume 258· Issue 4
Publisher page

Abstract

Abstract In this study, we describe the first reported preparation of rosin in fiber form through use of an electrospinning technique utilizing various solvent systems. The polymer concentration of the formed fiber was studied by using various solvents such as chloroform, ethanol, N-N dimethylformamide (DMF), tetrahydrofuran (THF), acetone, and methylene chloride (MC). An electrospray of the solution resulted in the beaded form of the rosin. By varying the polymer concentration with MC, we were then able to obtain uniform fibers. However, the fibers exhibited large diameter. We believe that it is possible to reduce the diameter of the rosin fibers through appropriate selection of electrospinning parameters. In addition, the morphological transitions from beads, to beaded fiber, to fiber were studied at different polymer concentrations. We propose a possible physical cross linking mechanism for the formation of rosin fibers during the electrospinning process. Our results demonstrate the feasibility of producing fiber nanostructures of rosin by using an electrospinning technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Conducting polymers and applications · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. On the skin sensitization potential of rosin and oxidized rosin10.1016/j.yrtph.2008.05.013 ↗
2. Polymerized rosin: novel film forming polymer for drug delivery10.1016/S0378-5173(02)00529-X ↗
3. Rosin derivatives: novel film forming materials for controlled drug delivery10.1016/S1381-5148(01)00117-1 ↗
4. Rosin microparticles as drug carriers: influence of various solvents on the formation of particles and sustained release of indomethacin10.1007/BF02933489 ↗
5. Rosin nanoparticles as a drug delivery carrier for the controlled release of hydrocortisone10.1007/s10529-005-1316-x ↗
6. Synthesis and characterization of PEGylated derivatives of rosin for sustained drug delivery10.1016/j.reactfunctpolym.2006.03.021 ↗
7. Electrospinning process and applications of electrospun fibers10.1016/0304-3886(95)00041-8 ↗
8. The effect of processing variables on the morphology of electrospun nanofibers and textiles10.1016/S0032-3861(00)00250-0 ↗
9. Modification of surface properties of electrospun polyamide nanofibers by means of a perfluorinated acridine10.1016/j.apsusc.2007.04.003 ↗
10. Surface functionalization, morphology and thermal properties of polyamide-6/O-MMT composite nanofibers by Fe2O3 sputter coating10.1016/j.apsusc.2008.02.185 ↗
11. Development of the biohemostat- a treatment modality for high pressure bleeding based on super-absorbent polymers and electrospun membranes
12. Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend10.1016/S0168-3659(02)00041-X ↗
13. Transport properties of porous membranes based on electrospun nanofibers10.1016/S0927-7757(01)00616-1 ↗
14. Protective textile materials based on electrospun nanofibers
15. Electrospinning of collagen nanofibers10.1021/bm015533u ↗
16. Formation of novel 2D polymer nanowebs via electrospinning10.1088/0957-4484/17/15/011 ↗
17. Role of chain entanglements on fiber formation during electrospinning of polymer solutions: good solvent non-specific polymer–polymer interaction limit10.1016/j.polymer.2005.03.011 ↗
18. Ultrafine electrospun polyamide-6 fibers: effects of solvent system and emitting electrode polarity on morphology and average fiber diameter10.1002/mame.200500024 ↗
19. Effect of solvents on high aspect ratio polyamide-6 nanofibers via electrospinning10.1007/s13233-010-0808-2 ↗
20. Solvent-dependent properties of electrospun fibrous composites for bone tissue regeneration10.1016/j.actbio.2009.07.028 ↗
21. Parameter study of electrospinning of polyamide-610.1016/j.eurpolymj.2008.06.032 ↗
22. Formation of high aspect ratio polyamide-6 nanofibers via electrically induced double layer during electrospinning10.1016/j.apsusc.2010.04.010 ↗
23. Characterization of nano-structured poly(-caprolactone) nonwoven mats via electrospinning10.1016/S0032-3861(02)00820-0 ↗
24. Influence of a mixing solvent with tetrahydrofuran and N,N-dimethylformamide on electrospun poly(vinyl chloride) nonwoven mats10.1002/polb.10293 ↗
25. Effects of solvents on electrospun polymeric fibers: preliminary study on polystyrene10.1002/pi.1599 ↗