journal article·2005-09

Characteristics of a cold cathode electron source combined with secondary electron emission in a FED

Wei Lei, Xiaobing Zhang, Xuedong Zhou, Zuoya Zhu, Chaogang Lou, Hongping Zhao

Applied Surface Science· Volume 251· Issue 1-4
Publisher page

Abstract

Abstract In electron beam devices, the voltage applied to the cathode (w.r.t. grid voltage) provides the initial energy for the electrons. Based on the type of electron emission, the electron sources are (mainly) classified into thermionic cathodes and cold cathodes. The power consumption of a cold cathode is smaller than that of a thermionic cathode. The delay time of the electron emission from a cold cathode following the voltage rise is also smaller. In cathode ray tubes, field emission display (=FED) panels and other devices, the electron current emitted from the cathode needs to be modulated. Since the strong electric field, which is required to extract electrons from the cold cathode, accelerates the electrons to a high velocity near the gate electrode, the required voltage swing for the current modulation is also high. The design of the driving circuit becomes quite difficult and expensive for a high driving voltage. In this paper, an insulator plate with holes is placed in front of a cold cathode. When the primary electrons hit the surface of the insulator tunnels, secondary electrons are generated. In this paper, the characteristics of the secondary electrons emitted from the gate structure are studied. Because the energies of the secondary electrons are smaller than that of the primary electron, the driving voltage for the current modulation is decreased by the introduction of the insulator tunnels, resulting in an improved energy uniformity of the electron beam. Triode structures with inclined insulator tunnels and with double insulator plates are also fabricated and lead to further improvements in the energy uniformity. The improved energy uniformity predicted by the simulation calculations is demonstrated by the improved brightness uniformity in the screen display images.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrostatic Discharge in Electronics · High voltage insulation and dielectric phenomena · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Application of field emitter arrays to microwave power amplifiers
2. Secondary electron emission studies10.1016/S0169-4332(96)00729-5 ↗
3. High field performance of thin-wall spacers in a vacuum gap10.1109/94.841821 ↗
4. Field emission display architecture based on hopping electron transport
5. Monte Carlo calculation of electron transport through Hop and Flu spacers in HOPFED
6. The ion bombardment in a FED with a hop spacer