journal article·2016-09

Structural and surface properties of semitransparent and antibacterial (Cu,Ti,Nb)Ox coating

D. Wojcieszak, M. Mazur, D. Kaczmarek, B. Szponar, M. Grobelny, M. Kalisz, A. Pelczarska, I. Szczygiel, A. Poniedzialek, M. Osekowska

Publisher page

Abstract

Abstract In this work structural and surface properties of oxide thin-film coating based on Cu, Ti and Nb prepared by reactive magnetron sputtering have been described. During the deposition process metallic Cu, Ti and Nb targets were sputtered in oxygen plasma. Structural characterization of the film microstructure has revealed that as-prepared coating was amorphous. Due to such structure and the content of Ti and Nb the hardness of the oxide film was about 3.6 GPa, which is 40% higher as compared to metallic Cu film. Moreover, the surface roughness was below 1 nm, what resulted in receiving of hydrophobic properties. The multioxide film was transparent at the level of 40%, but due to high Cu-content its optical absorption edge was about 450 nm and had bright orange color. Optical investigation has revealed that the energy band-gap of this film was 1.41 eV, which indicates on the presence of CuO form. Moreover, the studies of antimicrobial activity showed that as-prepared film had a strong bactericidal effect for Escherichia coli , Staphylococcus aureus , Pseudomonas aeruginosa , Bacillus subtilis and Enterococcus hirae , while fungicidal effect for Candida albicans was not observed . The biological activity was related to the amount of copper ions released from the surface of (Cu,Ti Nb)Ox coating, which was equal to 0.041 ppm per day.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Surface engineering and modification of biomaterials10.1016/j.tsf.2012.07.144 ↗
2. Bioactive biomaterials for controlling biofilms
3. Bio-functional nano-coatings on metallic biomaterials10.1016/j.msec.2015.05.018 ↗
4. Effect of surface modification on the adhesion enhancement of electrolessly deposited Ag-PTFE antibacterial composite coatings to polymer substrates10.1016/j.matlet.2014.12.125 ↗
5. Preparation of ZnO/Ag nanocomposite and coating on polymers for anti-infection biomaterial application10.1016/j.saa.2013.09.022 ↗
6. PVD and CVD hard coatings10.1016/B978-0-08-096527-7.00035-0 ↗
7. PVD Technology in fabrication of micro- and nanostructured coatings10.1016/B978-0-08-096532-1.00705-6 ↗
8. Current industrial practice critical issues in hard PVD and PA-CVD coatings10.1016/S0257-8972(96)03119-2 ↗
9. Conventional and advanced coatings for industrial applications: an overview, Nanocoatings and Ultra-Thin Films, Technologies and Applications
10. Antibacterial properties of metallic elements for alloying evaluated with application of JIS Z 2801: 200010.2355/isijinternational.48.1299 ↗
11. Continuous sterilization system that uses photo semiconductor powders10.1128/AEM.54.6.1330-1333.1988 ↗
12. Copper oxide nanomaterials: Synthesis, characterization and structure-specific antibacterial performance10.1016/j.cej.2014.09.083 ↗
13. A facile biosynthesis of copper nanoparticles: A micro-structural and antibacterial activity investigation
14. Multifunctional TieMe (Me ¼ Al, Cu) thin film systems for biomedical sensing
15. Antibacterial textiles prepared by RF-plasma and vacuum-UV mediated deposition of silver10.1016/S1010-6030(03)00204-1 ↗
16. Gold nanoparticles in biology and medicine: recent advances and prospects10.32607/20758251-2011-3-2-34-56 ↗
17. Ion release and tarnishing behavior of Au and Pd based amorphous alloys in artificial sweat10.1016/j.corsci.2013.07.036 ↗
18. Recent developments in fluorescent sensors for trace-level determination of toxic-metal ions10.1016/j.trac.2011.08.010 ↗
19. Nickel allergy-promoting effects of microbial or inflammatory substances at the sensitization step in mice10.1016/j.intimp.2011.05.010 ↗
20. Influence of Cu–Ti thin film surface properties on antimicrobial activity and viability of living cells10.1016/j.msec.2015.06.013 ↗
21. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
22. Nanostructured TiO2 and TiO2-Ag antimicrobial thin films
23. Application of reactive cyclodextrin poly butyl acrylate preformed polymers containing nano-ZnO to cotton fabrics and their impact on fabric performance10.1016/j.carbpol.2009.10.007 ↗
24. A strategy for ZnO nanorod mediated multi-mode cancer treatment10.1016/j.biomaterials.2010.11.027 ↗
25. The formation and UV-blocking property of needleshaped ZnO nanorod on cotton fabric10.1016/j.tsf.2008.12.007 ↗
26. Comparison of mechanical and corrosion properties of graphene monolayer on Ti–Al–V and nanometric Nb2O5 layer on Ti–Al–V alloy for dental implants applications10.1016/j.tsf.2015.05.059 ↗
27. Determination of optical and mechanical properties of Nb2O5 thin films for solar cells application10.1016/j.apsusc.2014.01.144 ↗
28. The structural analysis of biomacromolecule wool fiber with Ag-loading SnO2 nano-antibacterial agent by UV radiation10.1016/j.jphotochem.2006.11.025 ↗
29. Mechanical and electrochemical properties of Nb2O5, Nb2O5:Cu and graphene layers deposited on titanium alloy (Ti6Al4V)10.1016/j.surfcoat.2015.01.002 ↗
30. The surface science of TiO210.1016/S0167-5729(02)00100-0 ↗
31. Fabrication and characterization of anatase/rutile-TiO2 thin films by magnetron sputtering: a review10.1016/j.stam.2004.06.003 ↗
32. On the dielectric properties of dc magnetron TiO2 thin films10.1016/S0169-4332(03)00624-X ↗
33. Characterization and photocatalytic activity of TiO2 thin films prepared by RF magnetron sputtering10.1016/j.vacuum.2010.04.006 ↗
34. Photooxidative self-cleaning transparent titanium dioxide films on glass10.1557/JMR.1997.0367 ↗
35. Stenzel · 2014
36. Macleod · 2001
37. Modeling and preparation of practical optical filters10.1016/j.cap.2008.11.007 ↗
38. Investigation of microstructure, micro-mechanical and optical properties of HfTiO4 thin films prepared by magnetron co-sputtering10.1016/j.materresbull.2015.07.011 ↗
39. TiO2/SiO2 multilayer as an antireflective and protective coating deposited by microwave assisted magnetron sputtering10.2478/s11772-013-0085-7 ↗
40. Influence of nanocrystalline structure and composition on hardness of thin films based on TiO2
41. Zisman · 1964
42. Järn · 2010
43. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
44. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
45. TiO2 thin films with rutile phase prepared by DC magnetron co-sputtering at room temperature: Effect of Cu incorporation10.1016/j.apsusc.2015.03.106 ↗
46. Size- and constituent-dependent deformation mechanisms and strain rate sensitivity in nanolaminated crystalline Cu/amorphous Cu–Zr films10.1016/j.actamat.2015.05.007 ↗
47. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
48. Selective amine oxidation using Nb2O5 photocatalyst and O210.1021/cs200318n ↗
49. Antimicrobial efficacy of photocatalytic TiO2 coatings prepared by arc ion plating10.1016/j.surfcoat.2007.07.077 ↗
50. Selective aerobic oxidation of primary alcohols to aldehydes over Nb2O5 photocatalyst with visible light10.1002/cphc.201402343 ↗
51. Conditions contributing to underground copper corrosion10.1002/j.1551-8833.1984.tb05390.x ↗
52. Production of cuprous oxide, a solar cell material, by thermal oxidation and a study of its physical and electrical properties10.1016/S0927-0248(97)00233-X ↗
53. Optical bandgap widening of p-type Cu2O films bynitrogen doping10.1063/1.3072804 ↗
54. A photoelectrochemical determination of the position of the conduction and valence band edges of p-type CuO10.1063/1.330567 ↗
55. Hardness of nanocrystalline TiO2 thin films10.4028/www.scientific.net/JNanoR.18-19.195 ↗
56. Investigation of structural, optical and micro-mechanical properties of (NdyTi1-y)Ox thin films deposited by magnetron sputtering10.1016/j.matdes.2015.07.005 ↗
57. The structure and mechanical properties of thick rutile-TiO2 films using different coating treatments10.1016/j.apsusc.2011.08.055 ↗
58. Protective coatings for optical surfaces
59. Nanoindentation investigation of mechanical properties of ZrO2, ZrO2-Y2O3, Al2O3 and TiO2 thin films deposited on stainless steel OC 404 substrate by spray pyrolysis10.1016/j.mseb.2013.12.006 ↗
60. Photocatalytic properties of nanocrystalline TiO2 thin films doped with Tb
61. Structural, optical and hydrophilic properties of nanocrystalline TiO2 ultra-thin films prepared by pulsed dc reactive magnetron sputtering10.1016/j.jallcom.2011.01.038 ↗
62. Fabrication of high wettability gradient on copper substrate10.1016/j.apsusc.2013.04.065 ↗
63. Mechanism of wettability transition in copper metal foams: From superhydrophilic to hydrophobic10.1016/j.apsusc.2012.03.052 ↗