Surface morphology, microstructure and properties of as-cast AZ31 magnesium alloy irradiated by high intensity pulsed ion beams
Source abstract
Abstract
Abstract High intensity pulsed ion beam (HIPIB) irradiation was performed as surface modification to improve the properties of as-cast AZ31 magnesium (Mg) alloys. The surface morphology and microstructure of the irradiated Mg alloys were characterized and their microhardness, wear resistance and corrosion resistance before and after HIPIB irradiation were measured. The results show that the formation of crater on the surface was attributed to the particles impacted from the irradiated cathode material. HIPIB irradiation resulted in more vacancy defects on the surface of the material. Moreover, new dislocations were generated by the reaction between vacancies, and the dislocation configuration was also changed. These variations caused by the HIPIB are beneficial for improving the material properties. After 10 shots of irradiation, the average microhardness increased by 27.1% but the wear rate decreased by 38.5%. The corrosion rate was reduced by 24.8% according to the salt spray corrosion experiment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Phase transformation of graphite irradiated by high-intensity pulsed ion beams10.1016/j.apsusc.2006.12.024 ↗
2. Dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam10.1016/j.apsusc.2010.06.036 ↗
3. Droplets from the metal surfaces irradiated by a high-intensity pulsed ion beam10.1016/j.apsusc.2006.05.020 ↗
4. Features of the morphology, defect substructure, and phase composition of metal and alloy surfaces upon high-power ion beam irradiation10.1016/j.surfcoat.2003.11.021 ↗
5. High-power ion beam treatment application for properties modification of refractory alloys10.1016/S0257-8972(97)00408-8 ↗
6. Intense ion beam treatment of materials10.1557/S0883769400035739 ↗
7. Intense pulsed ion beam sources for industrial applications10.1063/1.1150382 ↗
8. Fatigue behaviour of friction stir processed AZ91 magnesium alloy produced by high pressure die casting10.1016/j.matchar.2006.04.025 ↗
9. Effect of high-intensity pulsed ion beam irradiation on the electrochemical corrosion behavior of AZ31 magnesium alloy
10. Surface composition, microstructure and corrosion resistance of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam10.1016/j.matchar.2011.03.005 ↗
11. Wear mechanism of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam10.1016/j.surfcoat.2009.11.041 ↗
12. Surface morphology of magnesium alloy irradiated by high-intensity pulsed ion beam10.1016/j.apsusc.2012.06.057 ↗
13. Galvanic corrosion of AZ91D magnesium alloy
14. Characteristics of material surfaces modified using plasma-enhanced ion beams10.1016/S0921-5093(98)00623-6 ↗
15. Crater formation on the surface of refractory alloys during high-power ion-beam processing10.1016/j.surfcoat.2006.01.078 ↗
16. Microstructure and rolling capability of modified AZ31–Ce–Gd alloys10.1016/j.matchar.2009.06.003 ↗
17. Detection of shocks generated by intense pulsed ion beam irradiation10.1016/j.surfcoat.2006.07.201 ↗
18. Surface nanostructure of a directionally solidified Ni-based superalloy DZ4 induced by high intensity pulsed ion beam irradiation10.1016/j.apsusc.2012.04.172 ↗
19. Influence of microstructure on the corrosion of die cast AZ91D10.1016/S0010-938X(98)00121-8 ↗
20. Influence of the microstructure on the corrosion behavior of AXJ530 magnesium alloy in 3.5% NaCl solution10.1016/j.matchar.2008.01.018 ↗