journal article·2011-09

Hydroxyapatite/polyamide66 porous scaffold with an ethylene vinyl acetate surface layer used for simultaneous substitute and repair of articular cartilage and underlying bone

Xiaobing Luo, Li Zhang, Yos Morsi, Qin Zou, Yanying Wang, Shibo Gao, Yubao Li

Applied Surface Science· Volume 257· Issue 23
Publisher page

Abstract

Abstract In this paper, tissue scaffold made from polyamide66 (PA66) and hydroxyapatite (HA) was prepared by co-precipitation and thermal-induced phase inversion method, in which biomimetic HA crystals were uniformly distributed in PA66 matrix. The porosity of the scaffold is about 81% and the macropore size is from 50 to 500 μm. The ethylene vinyl acetate (EVA) layer was thermally molded on one surface of HA-PA66 scaffold to develop EVA/HA-PA66 composite for articular cartilage/bone substitute, i.e., upper EVA layer for cartilage substitute and underlying HA-PA66 scaffold for bone bonding and fixation. The physicochemical and mechanical properties of EVA were also investigated. The results indicate that the tensile and compressive strength of EVA is about 4.65 MPa and 9.44 MPa respectively, while its mean friction coefficient is very small, only about 0.23. The cell culture of EVA and HA-PA66 scaffold shows that these materials possess good cytocompatibility. The proposed preparation method is novel and effective, and the EVA/HA-PA66 composite has good potential for simultaneous substitute of articular cartilage and underlying bone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Poly(vinyl alcohol)-acrylamide hydrogels as load-bearing cartilage substitute10.1016/j.biomaterials.2008.10.010 ↗
2. Chemical synthesis and characterization of hydroxyapatite (HAp)-poly(ethylene-co-vinyl alcohol) (EVA) nanocomposite using a phosphonic acid coupling agent for orthopedic applications10.1016/j.msec.2008.06.013 ↗
3. DSC and TGA study of the transitions involved in the thermal treatment of binary mixtures of PE and EVA copolymer with a crosslinking agent10.1016/j.polymer.2006.09.054 ↗
4. Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends10.1016/j.eurpolymj.2008.04.002 ↗
5. Viscometric investigation of compatibilization of the poly(vinyl chloride)/poly(ethylene-co-vinyl acetate) blends by terpolymer of maleic anhydride-styrene-vinyl acetate10.1016/j.molstruc.2008.04.003 ↗
6. Tissue responses of calcium phosphate cement: a study in dogs10.1016/S0142-9612(00)00016-8 ↗
7. Formation of osteoclast-like cells on HA and TCP ceramics10.1016/j.actbio.2007.03.014 ↗
8. Processing of HA-coated Ti–6Al–4V by a ceramic slurry approach: an in vitro study10.1016/S0142-9612(00)00272-6 ↗
9. Hydroxyapatite nano and microparticles: correlation of particle properties with cytotoxicity and biostability10.1016/j.biomaterials.2009.02.044 ↗
10. Development of hydroxyapatite/calcium silicate composites addressed to the design of load-bearing bone scaffolds10.1016/j.jmbbm.2008.05.006 ↗
11. Preparation and characterization of a nano apatite/polyamide6 bioactive composite10.1016/j.compositesb.2006.05.006 ↗
12. Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2007.04.014 ↗
13. Evaluation of a high density polyethylene fixing system for hydroxyapatite ceramic implants10.1016/S0142-9612(99)00141-6 ↗
14. Characterization of a polyvinyl alcohol–hydrogel artificial articular cartilage prepared by injection molding10.1163/156856204774196135 ↗
15. Attachment of artificial cartilage to underlying bone10.1002/jbm.b.10076 ↗
16. Morphology and composition of nanograde calcium phosphate needle-like crystals formed by simple hydrothermal treatment
17. Mechanical properties of articular cartilage in knees with unicompartmental osteoarthritis10.1302/0301-620X.76B2.8113301 ↗
18. Hench · 1993
19. The frictional properties of animal joints10.1016/0043-1648(62)90176-X ↗
20. Polymer entanglement density and its influence on interfacial friction10.1103/PhysRevE.76.026101 ↗
21. Boundary lubrication of joints10.1080/17453670710013852 ↗
22. Boundary lubrication
23. Deficiency of lubricating surfactant lining the articular surfaces of replaced hips and knees10.1093/rheumatology/37.2.143 ↗
24. Growth of osteoblast-like cells on porous hydroxyapatite ceramics: an in vitro study10.1016/S1389-0344(02)00027-8 ↗