journal article·2019-05

TEM study on the inhomogeneity of oxygen diffusion distances in single polyacrylonitrile-based carbon fibers

Xinshuang Guo, Kexiang Zhang, Jianxiang Cheng, Hui He, Lianlong He, Jian Xu

Publisher page

Abstract

Abstract Accurate measurement of oxygen diffusion distances (ODDs) is important but difficult in the production of polyacrylonitrile (PAN)-based carbon fibers. Traditionally, the ODDs were deemed to be homogeneous in a single fiber and paid no attention. Herein, the skin widths of carbon fibers with the skin-core structure were proposed to assess the ODDs, and the ODDs were investigated by transmission electron microscopy. The ODDs were first found to be homogeneous for the commercially noncircular carbon fibers, while they were uniform in every direction for the circular single carbon fibers. The inhomogeneity of the ODDs was unrelated to the surface and cross-sectional morphologies of carbon fibers, and it was considered to result from the density difference at the edge of a single PAN precursor fiber. These findings not only deepen the understanding of the effect of the PAN precursor fiber shapes on the oxygen diffusion during stabilization, but also provide an opportunity for optimizing the stabilization conditions according to the density difference at the edges of single PAN precursor fibers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Recycling and Waste Management Techniques · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. HRTEM microstructures of PAN precursor fibers10.1016/j.carbon.2005.12.041 ↗
2. Enhanced interfacial properties of carbon fiber reinforced polyamide 6 composites by grafting graphene oxide onto fiber surface10.1016/j.apsusc.2018.04.274 ↗
3. Surface modification of carbon fibers by a polyether sulfone emulsion sizing for increased interfacial adhesion with polyether sulfone10.1016/j.apsusc.2014.08.175 ↗
4. Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: an overview10.1016/j.polymdegradstab.2016.12.007 ↗
5. Surface structural evolvement in the conversion of polyacrylonitrile precursors to carbon fibers10.1016/j.apsusc.2014.11.174 ↗
6. Stretching-induced deformation of polyacrylonitrile chains both in quasicrystals and in amorphous regions during the in situ thermal modification of fibers prior to oxidative stabilization10.1016/j.carbon.2011.09.003 ↗
7. Improving preferred orientation and mechanical properties of PAN-based carbon fibers by pretreating precursor fibers in nitrogen10.1016/j.carbon.2011.06.011 ↗
8. A critical-review of the stabilization of polyacrylonitrile10.1016/0008-6223(91)90024-D ↗
9. Effect of the oxygen-induced modification of polyacrylonitrile fibers during thermal-oxidative stabilization on the radial microcrystalline structure of the resulting carbon fibers10.1016/j.polymdegradstab.2013.08.016 ↗
10. Stabilization kinetics of gel spun polyacrylonitrile/lignin blend fiber10.1016/j.carbon.2016.01.096 ↗
11. A comprehensive study on the oxidative stabilization of mesophase pitch-based tape-shaped thick fibers with oxygen10.1016/j.carbon.2016.12.040 ↗
12. A study on structural characterization of thermal stabilization stage of polyacrylonitrile fibers prior to carbonization10.1007/s12221-012-0329-z ↗
13. Nanoscale dynamic mechanical imaging of the skin–core difference: from PAN precursors to carbon fibers10.1016/j.matlet.2014.04.176 ↗
14. Oxidative stabilization of acrylic fibers. 1. Oxygen-uptake and general-model10.1007/BF00772714 ↗
15. Ji · 2010
16. Study on microstructure of transition zone and its strong contrast of single T700 carbon fibers10.1016/j.apsusc.2017.02.154 ↗
17. Microstructure difference between core and skin of T700 carbon fibers in heat-treated carbon/carbon composites10.1016/j.carbon.2011.02.025 ↗
18. New insights into orientation distribution of high strength polyacrylonitrile-based carbon fibers with skin-core structure10.1016/j.carbon.2016.08.022 ↗
19. Optical anisotropy of carbon fibers10.1038/279142a0 ↗
20. PAN fiber diameter effect on the structure of PAN-based carbon fibers10.1007/s12221-014-2480-1 ↗
21. SEM and OM study on the microstructure of oxidative stabilized polyacrylonitrile fibers10.1007/s00289-007-0737-1 ↗
22. Effects of oxygen content in the atmosphere on thermal oxidative stabilization of polyacrylonitrile fibers10.1039/C6RA15308A ↗
23. AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments10.1016/j.compscitech.2006.03.030 ↗
24. Transmission electron microscopy study of the microstructure of carbon/carbon composites reinforced with in situ grown carbon nanofibers10.1016/j.carbon.2012.01.063 ↗
25. High performance carbon fibers from very high molecular weight polyacrylonitrile precursors10.1016/j.carbon.2016.01.104 ↗
26. Micro-and nanostructure of the carbon matrix of infiltrated carbon fiber felts10.1016/S0008-6223(00)00116-0 ↗
27. Quantitative valence plasmon mapping in the TEM: viewing physical properties at the nanoscale10.1016/S0304-3991(03)00115-3 ↗
28. Investigating the structure of non-graphitising carbons using electron energy loss spectroscopy in the transmission electron microscope10.1016/j.carbon.2011.07.023 ↗
29. Thermoporometry study of coagulation bath temperature effect on polyacrylonitrile fibers morphology10.1016/j.tca.2011.02.015 ↗