Fabrication of three-dimensionally ordered macroporous Ta2O5 films through aqueous organic gel process
Source abstract
Abstract
Ta2O5 thin films have been prepared in the forms of three-dimensionally ordered macroporous (3-DOM) materials through aqueous organic gel process guided by polystyrene (PS) colloidal templates. The structure of the films was strongly affected by the infiltration process. This suggests that the infiltration process which aims at introducing desired materials into the interstitial spaces between the PS templates is of critical importance. Dip-drawing method was adopted for infiltration in this article. However, excess precursor worked as a capping agent for films prepared from the precursor of high concentration. Spin-coating method can efficiently remove the excess precursor by high speed rotating, which makes it a promising process for the infiltration of Ta-citric precursor with concentration higher than 0.5 mol/L. X-ray diffraction (XRD) pattern showed that the products can crystallize at 600 °C and had a pure orthorhombic phase. The chemical composition of the product was also studied by X-ray photoelectron spectroscopy (XPS). Highlights ► DOM Ta2O5 was first prepared by aqueous organic gel progress using PS templates. ► This method is free of special atmosphere and reagents, simple and cost-effective. ► Spin-coating method can be used to minimize the capping precursor. ► The final material is nice and free of capping layer when spin-coating is used. ► Composition and crystallinity of the product are studied.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mesoporous Materials and Catalysis · Photonic Crystals and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Ordered macroporous materials by emulsion templating10.1038/40105 ↗
2. Porous silica via colloidal crystallization10.1038/38921 ↗
3. Electrodeposition of 3D ordered macroporous germanium from ionic liquids: a feasible method to make photonic crystals with a high dielectric constant10.1002/anie.200805252 ↗
4. Thick self-ordered nanoporous Ta2O5 films with long-range lateral order10.1149/1.3116243 ↗
5. Highly ordered nanoporous Ta2O5 formed by anodization of Ta at high temperatures in a glycerol/phosphate electrolyte10.1016/j.elecom.2011.03.005 ↗
6. Electrodeposition from ionic liquid of 2D ordered Ta2O5 on titanium substrate through a polystyrene template10.1149/1.3206593 ↗
7. Three-dimensionally ordered macroporous Ti1−xTaxO2+x/2 (x=0.025, 0.05, and 0.075) nanoparticles: preparation and enhanced10.1016/j.matlet.2006.01.109 ↗
8. Low temperature preparation of nanocrystalline Sr0.5Ba0.5Nb2O6 powders using an aqueous organic gel route10.1016/j.materresbull.2003.11.002 ↗
9. Fabrication and characterization of three-dimensionally ordered macroporous niobium oxide10.1016/j.solidstatesciences.2009.06.005 ↗
10. Thin film photonic crystals: synthesis and characterization10.1039/b310759k ↗
11. Study of natural photonic crystals in beetle scales and their conversion into inorganic structures via a sol–gel bio-templating route10.1039/B913217A ↗