journal article·2021-11

Sputter-deposited TaCuN films: Structure, tribological and biomedical properties

Dongsheng Yu, Kaifei Miao, Ying Li, Xingfu Bao, Min Hu, Kan Zhang

Publisher page

Abstract

Abstract Stainless steel is a material that is commonly used in brackets and arch wires during orthodontic treatment. However, the high frictional resistance that occurs between stainless steel/stainless steel can reduce the efficiency of orthodontics. Developing protective films is a simple and effective method that can produce low friction in saliva environment. In this study, we investigated the respective mechanical and tribological behaviors of pure TaN film, TaCuN solid solution film and TaN/Cu nanocomposite film. Hardness tests showed that the hardness of TaN and TaN/Cu are approximately 15.6 and 7.3 GPa, respectively. However, TaCuN film has a higher hardness of about 17.6 GPa, which contributes to its excellent wear resistance. The hydrolysis reaction of TaCuN film during friction process turns the saliva environment into a solution containing oxide colloid particles. Moreover, during friction, a Cu2O-induced hydrophobic surface appears. As a result of the colloidal solution with double electric layer repulsion generated by this process and the saliva-lubricating film absorption of the hydrophobic surface, the TaCuN film achieves outstanding tribological properties, with a friction coefficient and wear rate of 0.045 and 1.18 × 10-9 mm3/Nm, respectively. In addition, biological experiments confirm that the TaCuN film is a material with non-toxic and good biocompatibility and that it demonstrates stronger antibacterial ability than stainless steel. Depositing the TaCuN solid-solution film on the arch wires represents an effective approach for the surface modification of orthodontic appliances. Furthermore, TaCuN film could potentially be applied as a protective film in the field of dental treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Polymer Surface Interaction Studies · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Quality of Life and Its Importance in Orthodontic10.1093/ortho/28.2.152 ↗
2. The impact of malocclusion/ orthodontic treatment need on the quality of life
3. The impact of malocclusions on oral health–related quality of life in children-a systematic review and meta–analysis10.1007/s00784-015-1681-3 ↗
4. Osteoblast response and osseointegration of a Ti-6Al-4V alloy implant incorporating strontium10.1016/j.actbio.2010.01.017 ↗
5. Robert P. Kusy, PhDa, Orthodontic Biomaterials: From the Past to the Present, The Angle Orthod. 72 (2002) 501–512.
6. K.T. Oh, S.U. Choo, K.M. Kim, K.N. Kim, A stainless steel bracket for orthodontic application, Eur. J. Orthod. 27 (2005) 237–244.10.1093/ejo/cji005 ↗
7. A.N. Quick, A.M. Harris, V.P. Joseph, Office reconditioning of stainless steel orthodontic attachments, Eur J Orthod 27 (2005) 231–236.10.1093/ejo/cjh100 ↗
8. S. Ehsani, M.A. Mandich, T.H. El–Bialy, C. Flores–Mir, Frictional resistance in self–ligating orthodontic brackets and conventionally ligated brackets, The Angle Orthod. 79 (2009) 592–601.10.2319/060208-288.1 ↗
9. Friction of Orthodontic Elastomeric Ligatures with Different Dimensions, The
10. Comparison of TiN and CN coatings on orthodontic stainless steel: Tribological and biological evaluation10.1016/j.surfcoat.2019.01.072 ↗
11. Comparison of friction forces between stainless orthodontic steel brackets and TiNi wires in wet and dry conditions
12. Factors affecting friction in the pre–adjusted appliance10.1093/ejo/26.6.579 ↗
13. Experimental salivary pellicles on the surface of orthodontic materials10.1067/mod.2001.110583 ↗
14. In vitro assessment of stainless steel orthodontic brackets coated with titanium oxide mixed Ag for anti-adherent and antibacterial properties against Streptococcus mutans and Porphyromonas gingivalis10.1016/j.micpath.2017.09.052 ↗
15. The Role of Bacterial Biofilms in Dental Caries and Periodontal and Peri–implant Diseases: A Historical Perspective10.1177/0022034519830686 ↗
16. Study of dental plaque in orthodontic patients10.1177/00220345700490022101 ↗
17. Comparison of Streptococcus mutans concentrations in non–banded and banded orthodontic patients10.1177/00220345810600120301 ↗
18. Growth and mechanical properties of epitaxial NbN(001) films on MgO (001)10.1016/j.surfcoat.2016.01.009 ↗
19. The tribological performance at elevated temperatures of MoNbN-Ag coatings10.1016/j.apsusc.2020.145372 ↗
20. Ultralow-Friction and Ultralow-Wear TiN-Ag Solid Solution Coating in Base Oil10.1021/acs.jpclett.9b03864 ↗
21. Promoting bone-like apatite formation on titanium alloys through nanocrystalline tantalum nitride coatings10.1039/C5TB00236B ↗
22. Biomedical properties of tantalum nitride films synthesized by reactive magnetron sputtering10.1016/S0040-6090(01)01448-1 ↗
23. Tantalum nitride coatings prepared by magnetron sputtering to improve the bioactivity and osteogenic activity for titanium alloy implants10.1039/C7RA09032C ↗
24. Facile construction of Ag nanoparticles encapsulated into carbon nanotubes with robust antibacterial activity10.1016/j.carbon.2018.01.073 ↗
25. Antibacterial effects of titanium embedded with silver nanoparticles based on electron-transfer-induced reactive oxygen species10.1016/j.biomaterials.2017.01.028 ↗
26. Towards long–lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding10.1016/j.actbio.2010.08.009 ↗
27. Bioinspired anchoring AgNPs onto micro-nanoporous TiO2 orthopedic coatings: Trap-killing of bacteria, surface-regulated osteoblast functions and host responses10.1016/j.biomaterials.2015.10.035 ↗
28. Synthesis and antibacterial property of Ag-containing TiO2 coatings by combining magnetron sputtering with micro-arc oxidation10.1016/j.surfcoat.2013.08.062 ↗
29. Biological actions of silver nanoparticles embedded in titanium controlled by micro-galvanic effects10.1016/j.biomaterials.2010.09.066 ↗
30. Potential use of copper surfaces to reduce survival of epidemic methicillin-resistant Staphylococcus aureus in the healthcare environment10.1016/j.jhin.2005.12.008 ↗
31. Strain specificity in antimicrobial activity of silver and copper nanoparticles10.1016/j.actbio.2007.11.006 ↗
32. Deposition and Characterization of c-NbN/NbCN Multilayers on Si(100) Substrates10.4028/www.scientific.net/MSF.898.1447 ↗
33. Friction and wear properties of TiN, TiAlN, AlTiN and CrAlN PVD nitride coatings10.1016/j.ijrmhm.2011.09.010 ↗
34. Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000℃10.1016/j.actamat.2010.06.006 ↗
35. Antibacteria and ant-wear TaN-(Ag, Cu) nanocomposite thin films deposited on polyether ether ketone10.1016/j.tsf.2015.02.063 ↗
36. Cooperative Effects in Water Binding to Cuprous Oxide Surfaces
37. Water Adsorption on Cu2O (111) Surfaces: A Scanning Tunneling Microscopy Study
38. Aqueous lubrication by fractionated salivary proteins: Synergistic interaction of mucin polymer brush with low molecular weight macromolecules10.1016/j.triboint.2014.12.025 ↗
39. B.K. Gan, M.M.M. Bilek, D.R. McKenzie, M.B. Taylor, D.G. McCulloch, Effect of intrinsic stress on preferred orientation in AlN thin films, J. Appl. Phys. 95 (2004) 2130–2134.10.1063/1.1640462 ↗
40. Doping Cu Atoms Excel as the Functional Material to Tune the Wettability for TMeNs Hard Coating10.1002/admi.201800391 ↗
41. RF magnetron sputtering of a hydroxyapatite target: a comparison study on polytetrafluorethylene and titanium substrates10.1016/j.apsusc.2017.04.090 ↗
42. Influence of Cu Content on the Structure, Mechanical, Friction and Wear Properties of VCN–Cu Films10.3390/coatings8030095 ↗
43. The role of copper incorporation on the microstructure, mechanical and tribological properties of TiBN-Cu films by reactive magnetron sputtering10.1016/j.jallcom.2019.06.053 ↗
44. Microstructure and tribological behaviors of MoN-Cu nanocomposite coatings sliding against Si3N4 ball under dry and oil-lubricated conditions
45. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
46. Ag transport in CrN-Ag nanocomposite coatings10.1016/j.tsf.2012.06.082 ↗
47. Mechanical and tribological properties of CrAlN-Ag self–lubricating films10.1016/j.surfcoat.2007.05.088 ↗
48. Microstructure, hardness, and wear resistance of sputtering TaN coating by controlling RF input power10.1016/j.surfcoat.2016.03.034 ↗
49. Grain size dependence of the strength of metals: The Hall-Petch effect does not scale as the inverse square root of grain size10.1016/j.ijplas.2013.07.004 ↗
50. Hardness and strain rate sensitivity of nanocrystalline Cu10.1016/j.scriptamat.2006.02.022 ↗
51. Hard and superhard Zr-Ni-N nanocomposite films10.1016/S0257-8972(01)00989-6 ↗
52. Stoichiometry behavior of TaN, TaCN and TaC thin films produced by magnetron sputtering10.1016/j.apsusc.2013.03.028 ↗
53. Interfacial reactions during sputter deposition of Ta and TaN films on organosilicate glass: XPS and TEM results10.1016/j.apsusc.2007.01.020 ↗
54. Properties of thin Ta-N films reactively sputtered on Cu/ SiO/ Si substrates10.1016/S0040-6090(97)00914-0 ↗
55. Tailoring the surface chemical bond states of the NbN films by doping Ag: Achieving hard hydrophobic surface10.1016/j.apsusc.2017.02.199 ↗
56. Toward low friction in water for Mo2N/Ag coatings by tailoring the wettability10.1016/j.apsusc.2018.04.041 ↗
57. Copper sulfide nanoparticles as hole-transporting–material in a fully-inorganic blocking layers n-i-p perovskite solar cells: Application and working insights10.1016/j.apsusc.2019.01.289 ↗
58. Primary excitation spectra in XPS and AES of Cu, CuO: Relative importance of surface and core hole effects10.1016/j.susc.2015.02.009 ↗
59. XPS study of the Cu@Cu2O core-shell nanoparticles10.1016/j.apsusc.2008.08.110 ↗
60. What interactions drive the salivary mucosal pellicle formation?10.1016/j.colsurfb.2014.05.020 ↗
61. Salivary protein adsorption onto hydroxyapatite and sds-mediated elution studied byin situellipsometry10.1080/08927010109378477 ↗
62. Supramolecular synergy in the boundary lubrication of synovial joints10.1038/ncomms7497 ↗
63. Achieving Ultralow Wear with Stable Nanocrystalline Metals10.1002/adma.201802026 ↗
64. Toughness enhancement and tribochemistry of the Nb–Ag–N films actuated by solute Ag10.1016/j.actamat.2017.07.034 ↗
65. Improved Osteogenesis of Selective-Laser-Melted Titanium Alloy by Coating Strontium-Doped Phosphate With High-Efficiency Air-Plasma Treatment10.3389/fbioe.2020.00367 ↗
66. Eco-Friendly Method for Tailoring Biocompatible and Antimicrobial Surfaces of Poly-L-Lactic Acid10.3390/nano9030428 ↗
67. Pharmacokinetic-Pharmacodynamic Modeling for Coptisine Challenge of Inflammation in LPS–Stimulated Rats10.1038/s41598-018-38164-4 ↗
68. Intranasal delivery of whole cell lysate of Mycobacterium tuberculosis induces protective immune responses to a modified live porcine reproductive and respiratory syndrome virus vaccine in pigs10.1016/j.vaccine.2011.03.005 ↗
69. ISO 10993–10:2010, Biological evaluation of medical devices−Part 10: Tests for irritation and skin sensitization.