journal article·2014-11

A novel method of reducing agent contacting pattern for metal ceramic composite membrane fabrication

Amrita Agarwal, Murali Pujari, Ramgopal Uppaluri, Anil Verma

Publisher page

Abstract

Abstract Deliberating upon process modifications for surfactant induced electroless plating (SIEP), this article highlights the plating bath performance characteristics for two distinct reducing agent contacting modes (bulk and drop wise). Eventually, the effect of reducing agent concentration (50, 100, 200% excess) suitable for electroless plating bath for a nickel concentration of 0.08 mol/L was investigated. Finally, the compatibility of variation in nickel concentration (0.08–0.24 mol/L) with respect to variation in reducing agent concentration (50, 100, 200% excess) was investigated. LPSA, BET, FTIR, XRD, FESEM and nitrogen permeation experiments were used for surface and physical characterization. It was observed that for the bulk addition of reducing agent, the PPD values were 84.5% which increased to 89.3% for dropwise addition case. Thus the optimal combinations of SIEP process parameters were identified as 0.08 mol/L of nickel metal solution concentration with 100% excess drop-wise reducing agent. These conditions provided a plating rate of 5.5 × 10 −5 mol/m 2 s, PPD of 89.3% and a metal film thickness of 15.7 μm respectively after 12 h of sequential plating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Advanced Sensor and Energy Harvesting Materials · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Electroless Pd and Ag deposition kinetics of the composite Pd and Pd/Ag membranes synthesized from agitated plating baths10.1016/j.memsci.2008.12.062 ↗
2. Preparation and characterization of palladium plated porous glass for hydrogen enrichment10.1016/j.cattod.2005.06.012 ↗
3. Preparation of a palladium alloy composite membrane supported in a porous stainless steel by vacuum electrodeposition10.1016/S0376-7388(98)00262-2 ↗
4. Performance characteristics of hydrothermal and sonication assisted electroless plating baths for nickel–ceramic composite membrane fabrication10.1016/j.desal.2011.08.039 ↗
5. S. Ilias, M.A. Islam, Fabrication of Pd/Pd-alloy Films by Surfactant Induced Electroless Plating for H2 Separation from Advanced Coal Gasification Processes, Patent Application #20100068391 (USPTO assignment date: March 18, 2010).
6. Effects of surfactants in an electroless nickel–plating bath on the properties of Ni–P alloy deposits10.1021/ie0105831 ↗
7. Electroless deposition of Ni-P-nano-ZrO2 composite coatings in the presence of various types of surfactants10.1016/j.jcis.2012.03.049 ↗
8. Preparation, optimization and characterization of low cost ceramics for the fabrication of dense nickel composite membranes10.1016/j.ceramint.2013.03.024 ↗
9. Development of a new porous metal support of metallic dense membrane for hydrogen separation10.1016/j.memsci.2005.12.035 ↗
10. The influence of SDS and CTAB surfactants on the surface morphology and surface topography of electroless Ni–P deposits10.1016/j.jmatprotec.2008.01.057 ↗
11. Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristics10.1016/j.desal.2010.10.025 ↗
12. Effects of electroless plating chemistry on the synthesis of palladium membranes10.1016/S0376-7388(00)00563-9 ↗
13. Pulsed electrodeposition synthesis and hydrogen absorption properties of nanostructured palladium-iron alloy films10.1149/1.1838809 ↗
14. Characterization of Pd-Cu membranes fabricated by surfactant induced electroless plating (SIEP) for hydrogen separation10.1016/j.ijhydene.2011.11.024 ↗
15. Autothermal reforming of ethanol in a Pd-Ag/Ni composite membrane reactor10.1016/j.ijhydene.2010.04.059 ↗
16. Effects of porous alumina support and plating time on electroless plating of palladium membrane10.1016/S1005-0302(11)60016-9 ↗
17. Reduction of Ni2+ by hydrazine in solution for the preparation of nickel nano-particles10.1007/s10853-005-5874-z ↗
18. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
19. Optimal electroless plating rate enhancement techniques for the fabrication of low cost dense nickel/ceramic composite membranes10.1016/j.ceramint.2013.03.024 ↗
20. Palladium composite membranes by electroless plating technique – relationships between plating kinetics, film microstructure and membrane performance10.1016/S0376-7388(99)00041-1 ↗
21. On the influence of surfactant incorporation during electroless nickel plating10.1021/ie202625n ↗
22. Effect of surfactants on performance of electroless plating baths for nickel-ceramic composite membrane fabrication10.1179/1743294411Y.0000000035 ↗