journal article·2024-03

Grenzen des Korrosionsmonitorings zum Wirksamkeitsnachweis des Instandsetzungsprinzips 8.3 (W‐Cl)

Christoph Zausinger, Kai Osterminski, Christoph Gehlen

Beton- und Stahlbetonbau· Volume 119· Issue 3
Publisher page

Abstract

Abstract Korrosion von Stahl in kurzzeitig tausalzexponiertem und gerissenem Stahlbeton ist ein seit Jahrzehnten bekanntes und kontrovers diskutiertes Problem in der Instandhaltung von Infrastrukturbauwerken. Zum Erhalt dieser Bauwerke bietet die Technische Richtlinie Instandhaltung von Betonbauwerken das Instandsetzungsprinzip 8.3 (W‐Cl). Hierbei wird die gerissene Stahlbetonoberfläche mit einem Oberflächenschutzsystem versehen, um weiteren Schadstoffeintrag zu unterbinden und langfristig eine Austrocknung des Betons zu erreichen. Es wird gezeigt, ob der bereits eingetretene Schadstoffeintrag in Form von Chloriden aus Tausalzen innerhalb einer Winterperiode ein überkritisches Maß erreichen kann und anhand welcher Parameter sich der Bauteilzustand festmachen lässt. Der Verlauf der Korrosionsströme und der Polarisationswiderstände sowie die Chloridkonzentration im Rissbereich auf Bewehrungshöhe sind dabei die wichtigsten Parameter. Die Untersuchungen zeigen, dass nur die Korrelation dieser Parameter den Instandsetzungsnachweis ermöglicht. Ohne Kenntnis über diese Werte ist die Vorhersage über den Bauteilzustand nicht sicher möglich und fortlaufendes, vielseitiges Korrosionsmonitoring deshalb unabdingbar.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Technische Universität München Lehrstuhl Werktstoffe und Werkstoffprüfung im Bauwesen Franz-Langinger-Straße 10 81245 München

References (26)

Show source-provided references
1. Deutsches Institut für Bautechnik (2021)Technische Regel Instandhaltung von Betonbauwerken. Berlin.
2. Breit W.; Dauberschmidt C. (2020)Investigation on the effectiveness of the repair method 8.3 ′′Corrosion protection by increasing electrical resistivity′′ in chloride-containing concrete Part 1: Overview and recognition of Prof. Raupach's contribution. Materials and Corrosion 71 No. 5 pp. 696–706.https://doi.org/10.1002/maco.20201153910.1002/maco.202011539 ↗
3. Becker F.; Dauberschmidt C. (2020)Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 3: The influence on corrosion of chloride-contaminated concretes under protective coatings. Materials and Corrosion 71 No. 5 pp. 716–725.https://doi.org/10.1002/maco.20201154310.1002/maco.202011543 ↗
4. Hornbostel K. et al. (2017)Limitations of the use of concrete bulk resistivity as an indicator for the rate of chloride-induced macro-cell corrosion. Structural Concrete 18 No. 2 pp. 326–333.https://doi.org/10.1002/suco.20150014110.1002/suco.201500141 ↗
5. Wunderle-Beck J. et al. (2022)Korrosionsmonitoring zum Wirksamkeitsnachweis des Instandsetzungsverfahrens 8.3 (W-Cl). Beton- und Stahlbetonbau 117 H. 12 S. 976–984.https://doi.org/10.1002/best.20220008110.1002/best.202200081 ↗
6. Mayer T. F. et al. (2020) Das Instandsetzungsprinzip W-Cl. Bautechnik 97 H. 1 S. 2–10.https://doi.org/10.1002/bate.20190008310.1002/bate.201900083 ↗
7. Hiemer F. et al. (2018)Chloride induced reinforcement corrosion in cracked and coated concrete: From experimental studies to time-dependent numerical modeling. Materials and Corrosion 69 No. 11 pp. 1526–1538.https://doi.org/10.1002/maco.20181014810.1002/maco.201810148 ↗
8. Keßler S.; Hiemer F.; Gehlen C. (2017)Einfluss einer Betonbeschichtung auf die Mechanismen der Bewehrungskorrosion in gerissenem Stahlbeton. Beton- und Stahlbetonbau 112 H. 4 S. 198–206.https://doi.org/10.1002/best.20170000210.1002/best.201700002 ↗
9. Zausinger C. et al. (2023)Carbon steel electrodes within chloride induced reinforcement corrosion in cracked concrete: Approximation to deterministic system response. Materials and Corrosion.https://doi.org/10.1002/maco.20231400810.1002/maco.202314008 ↗
10. Osterminski K.; Zausinger C.; Gehlen C. (2022)Chloridumverteilung in gerissenen und mit Prinzip 8.3 (W-Cl) instand gesetzten Stahlbetonbauteilen. Beton- und Stahlbetonbau 117 H. 12 S. 968–975.https://doi.org/10.1002/best.20220008010.1002/best.202200080 ↗
11. Zausinger C.; Osterminski K.; Gehlen C. (2022)Transient and gradient analyses of depolarization criteria. Valuable tools in chloride-induced rebar corrosion monitoring. Materials and Corrosion 73 No. 6 pp. 932–939.https://doi.org/10.1002/maco.20211283910.1002/maco.202112839 ↗
12. Fraundorfer A.; Dauberschmidt C. (2022)Korrosionsmonitoring in ungerissenem Stahlbeton in der Schädigungsphase – neue Forschungserkenntnisse. Beton- und Stahlbetonbau 117 H. 12 S. 956–967.https://doi.org/10.1002/best.20220008410.1002/best.202200084 ↗
13. Beck M. et al. (2012)Deterioration model and input parameters for reinforcement corrosion. Structural Concrete 13 No. 3 pp. 145–155.https://doi.org/10.1002/suco.20120000410.1002/suco.201200004 ↗
14. Andrade C.; Alonso C. (2004)Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Materials and Structures 37 No. 9 pp. 623–643.https://doi.org/10.1007/BF0248329210.1007/BF02483292 ↗
15. Angst U. M. et al. (2019)The effect of the steel – concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI. Materials and Structures 52 No. 4.https://doi.org/10.1617/s11527-019-1387-010.1617/s11527-019-1387-0 ↗
16. Harnisch J.; Raupach M. (2011)Untersuchungen zum kritischen korrosionsauslösenden Chloridgehalt unter Berücksichtigung der Kontaktzone zwischen Stahl und Beton. Beton- und Stahlbetonbau 106 H. 5 S. 299–307.https://doi.org/10.1002/best.20110000810.1002/best.201100008 ↗
17. Warkus J.; Raupach M. (2010)Modelling of reinforcement corrosion - geometrical effects on macrocell corrosion. Materials and Corrosion 61 No. 6 pp. 494–504.https://doi.org/10.1002/maco.20090543710.1002/maco.200905437 ↗
18. Osterminski K.; Schießl P. (2012)Design model for reinforcement corrosion. Structural Concrete 13 No. 3 pp. 156–165.https://doi.org/10.1002/suco.20120000310.1002/suco.201200003 ↗
19. Raupach M. (1992)Zur chloridinduzierten Makroelementkorrosion von Stahl in Beton[Dissertation]. RWTH Aachen.
20. Wagner C.; Traud W. E. (1938)Über die Deutung von Korrosionsvorgängen durch Überlagerung von elektrochemischen Teilvorgängen und über die Potentialbildung an Mischelektroden. Zeitschrift für Elektrochemie und angewandte physikalische Chemie H. 44 S. 391–454.10.1002/bbpc.19380440702 ↗
21. Stern M.; Weisert E. D. (1959)Experimental observations on the relation between polarization resistance and corrosion rate. Proceedings of the American Society for Testing and Materials No. 59 pp. 1280–1290.
22. Stern M.; Geary A. L. (1957)Electrochemical Polarization. Journal of The Electrochemical Society 104 No. 1 pp. 56.https://doi.org/10.1149/1.242849610.1149/1.2428496 ↗
23. Zausinger C. (2023)Depolarization time constants – quantifying active rebar corrosion surface area. DRMS Porto.
24. Neff D. et al. (2011)Morphology of corrosion products of steel in concrete under macro-cell and self-corrosion conditions. Materials and Corrosion 62 No. 9 pp. 861–871.https://doi.org/10.1002/maco.20100586110.1002/maco.201005861 ↗
25. Schnell J.; Raupach M. (2015)Kritischer korrosionsauslösender Chloridgehalt – Positionspapier des DAfStb zum aktuellen Stand der Technik. DAfStb-Positionspapier.
26. Breit W. (1997)Untersuchungen zum kritischen korrosionsauslösenden Chloridgehalt für Stahl in Beton[Dissertation]. RWTH Aachen.