journal article·1999-01

Characterization of fracture process during ring burst test of FW-FRP composites with damage

Akihiro Horide, Shuichi Wakayama, Masanori Kawahara

Advanced Composite Materials· Volume 8· Issue 2
Publisher page

Abstract

The strength of two- and three-ply FRP composite with artificial damage under internal pressure was evaluated using the ring burst test developed by the authors [1, 2]. Ring specimens were fabricated by a filament winding (FW) machine. In this study, the simulated damage of the scratch and the combination of scratch and pre-existing interlaminar delamination, i.e. teflon sheet inserted between the outermost and the inner FRP layers, were introduced artificially into the FW-FRP specimen. The fracture behavior during the tests of damaged FRP was characterized by observation using an 8-mm video camera and a high magnification video scope, strain measurements and AE analysis. It was confirmed that AE analysis is exellent for monitoring the propagation of delamination in an FRP pressure vessel with damage. The pressure of a notched specimen showed the maximum when the delamination propagated to the half region of the specimen. The maximum pressure was larger than the predicted pressure based on the premise that the notched outermost ply could not sustain the load. As the teflon sheet was longer, the maximum pressure was gradually decreased due to the decrease in initial ligament. On the other hand, as the teflon sheet was longer, the burst pressure of specimen with a scratch in the outermost ply was enhanced due to the smooth propagation of interlaminar delamination. Consequently, it was demonstrated by the observation of the fracture behavior and the fracture surface that the burst pressure was decreased due to the expansion of damage into the inner ply.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Fujishima O. · 1994 · 463
2. Horide, A., Wakayama, S. and Kawahara, M. Proc. Japan Soc. Composite Materials 1998 Annual Meeting. Tokyo. pp.17–18.
3. Domae H. · J. High Press. Inst. Jpn. · 1997 · 35 · 26
4. Narushima T. · J. High Press. Inst. Jpn. · 1997 · 35 · 9
5. Matemilola S. A. · J. Pressure Vessel Tech. · 1997 · 119 · 43510.1115/1.2842327 ↗
6. Hyakutake H. · J. Soc. Mat. Sci., Japan · 1995 · 44 · 40110.2472/jsms.44.401 ↗
7. Kageyama K. · Trans. Jpn. Soc. Mech. Eng. · 1987 · 53 · 189810.1299/kikaia.53.1898 ↗
8. Todoroki A. · Trans. Jpn. Soc. Mech. Eng. · 1991 · 57 · 164810.1299/kikaia.57.1648 ↗
9. Tohgo K. · J. Compos. Mater. · 1993 · 27 · 105410.1177/002199839302701101 ↗
10. Horide A. · Trans. Jpn. Soc. Mech. Eng.