journal article·2026-11Open access

Atomic-scale ordering enables intrinsic bioactivity and rapid osseointegration in medium-entropy alloys

Jiahao Li, Meiyuan Jiao, Haoyang Li, Chenglong Li, Jiansong Zhang, Hui Wang, Jianchao Xue, Xiaoye Zhou, Honghui Wu, Qingfeng Yin, Xiaomin Tong, Xin Su, Yuan Wu, Jingjing Tian, Zhaoping Lu, Yu Zhao

Abstract

Conventional alloys achieve mechanical reliability and corrosion resistance at the expense of bioactivity, necessitating exogenous surface treatments that introduce long-term interfacial instability. In this study, we demonstrate that atomic-scale ordering, specifically the coexistence of chemical short-range order (CSRO) and ordered oxygen complexes (OOCs), can intrinsically integrate these otherwise contradictory requirements within a single metallic system. This strategy exploits the principle that atomic arrangements governing bulk mechanical behavior concurrently regulate surface physicochemical properties, thereby eliminating the need for extrinsic modification. A Ti-30Zr-14Nb-3O medium-entropy alloy (MEA) designed with CSRO-OOCs synergy exhibits bone-matched elastic modulus (∼42 GPa) and high yield strength (∼1040 MPa), overcoming the conventional strength-modulus trade-off. Importantly, this atomic configuration intrinsically generates nanoscale surface roughness (Ra ∼50.80 nm) and optimized surface energy distribution—features typically achieved only through artificial surface engineering. These ordering-regulated surface characteristics promote accelerated osteogenic differentiation in vitro without additional surface treatment. Molecular dynamics simulations reveal enhanced Ca 2+ and PO 4 3− adsorption on OOC-enabled surfaces, facilitating early calcium phosphate nucleation. In a rat cranial defect model, this intrinsic bioactivity translates into rapid, continuous bone formation along the implant surface, achieving a bone surface (BS) value of 70.63 ± 21.35 mm 2 at 4 weeks, which was 3.5 times greater than that of the control group and significantly exceeds that of TC4. This work establishes atomic-scale ordering as a promising design framework for integrating mechanical compatibility with enhanced spontaneous osteoconductivity in metallic biomaterials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. New zr-ti-nb alloy for medical application: development, chemical and mechanical properties, and biocompatibility10.3390/ma13061306 ↗
2. Improved osseointegration of 3D printed Ti-6Al-4V implant with a hierarchical micro/nano surface topography: an in vitro and in vivo study10.1016/j.msec.2020.111505 ↗
3. Mechanism of and factors associated with the loosening of the implant abutment screw: a review10.1111/jerd.12494 ↗
4. Additively manufactured controlled porous orthopedic joint replacement designs to reduce bone stress shielding: a systematic review10.1186/s13018-022-03492-9 ↗
5. Medical high-entropy alloy: outstanding mechanical properties and superb biological compatibility
6. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
7. Snoek-type damping performance in strong and ductile high-entropy alloys10.1126/sciadv.aba7802 ↗
8. Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy10.1016/j.intermet.2020.106845 ↗
9. Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys10.1016/j.jallcom.2020.157997 ↗
10. Metallic materials for bone repair10.1002/adhm.202302132 ↗
11. Porous magnesium-based scaffolds for tissue engineering10.1016/j.msec.2016.11.027 ↗
12. Manipulating the ordered oxygen complexes to achieve high strength and ductility in medium-entropy alloys10.1038/s41467-023-36319-0 ↗
13. Design strategy of Ti-Zr-Hf-Nb high-entropy alloys based on first principles computations10.1016/j.actamat.2025.121183 ↗
14. Mechanical properties and biocompatibility of Ti58−x–Zr40–Nbx–Al2 medium entropy alloy for osteogenic applications10.1007/s11661-025-08027-5 ↗
15. Mechanical and corrosion properties of novel β-Ti-rich compositionally complex alloys in the as-cast state10.1007/s11665-025-12382-0 ↗
16. Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti-24Nb-38Zr-2Mo alloy for orthopedic applications10.1016/j.actbio.2021.07.061 ↗
17. A new non-equiatomic Ti40Zr25Nb25Ta5Al5 refractory high entropy alloy for potential biomedical applications10.1016/j.jallcom.2025.180299 ↗
18. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
19. Medium-entropy Zr-Nb-Ti alloys with low magnetic susceptibility, high yield strength, and low elastic modulus through spinodal decomposition for bone-implant applications10.1016/j.actbio.2024.11.001 ↗
20. Breaking the limit of Young's modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications10.1016/j.jallcom.2020.154401 ↗
21. Coupled experimental and computational investigation of omega phase evolution in a high misfit titanium-vanadium alloy10.1016/j.actamat.2017.03.047 ↗
22. Influence of oxygen content on microstructure and mechanical properties of Ti–Nb–Ta–Zr alloy10.1016/j.matdes.2010.11.049 ↗
23. Nonlinear elastic deformation behaviour of Ti-30Nb-12Zr alloys10.1016/j.scriptamat.2010.03.011 ↗
24. Advancing of titanium medical implants by surface engineering: recent progress and challenges10.1080/17425247.2021.1928071 ↗
25. Enhanced in-vitro osteoblastic functions on beta-type titanium alloy using surface mechanical attrition treatment10.1016/j.msec.2018.12.082 ↗
26. Multifunctional coatings and nanotopographies: toward cell instructive and antibacterial implants10.1002/adhm.201801103 ↗
27. The current status of stimuli-responsive nanotechnologies on orthopedic titanium implant surfaces10.1186/s12951-023-02017-8 ↗
28. Ion release and local effects of titanium metal particles from dental implants: an experimental study in rats10.1002/JPER.22-0091 ↗
29. Cobalt-chromium-molybdenum alloy causes metal accumulation and metallothionein up-regulation in rat liver and kidney10.1111/j.1742-7843.2007.00137.x ↗
30. Cytotoxic effects of submicron- and nano-scale titanium debris released from dental implants: an integrative review10.1007/s00784-021-03785-z ↗
31. Nanosized-Ag-doped porous beta-tricalcium phosphate for biological applications10.1016/j.msec.2020.111037 ↗
32. Clinical outcomes, metal ion levels, lymphocyte profiles, and implant survival following five different bearings of total hip arthroplasty: a mean 10-year Follow-up study10.1016/j.arth.2022.04.031 ↗
33. Detection of Posner's clusters during calcium phosphate nucleation: a molecular dynamics study10.1039/C7TB01199G ↗
34. Bioinspired surface modification of orthopedic implants for bone tissue engineering10.1016/j.biomaterials.2019.119366 ↗
35. Osteoconductive, osteogenic, and antipathogenic plasma electrolytic oxidation coatings on titanium implants with BMP-210.1021/acsami.3c08954 ↗
36. beta-tricalcium phosphate for bone substitution: synthesis and properties10.1016/j.actbio.2020.06.022 ↗
37. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
38. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
39. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
40. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
41. DP-GEN: a concurrent learning platform for the generation of reliable deep learning based potential energy models