Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Source abstract
Abstract
The aim of this study was to explore the lower resolution limits of an electrohydrodynamic process combined with direct writing technology of polymer melts. Termed melt electrospinning writing, filaments are deposited layer-by-layer to produce discrete three-dimensional scaffolds for in vitro research. Through optimization of the parameters (flow rate, spinneret diameter, voltage, collector distance) for poly-ϵ-caprolactone, we could direct-write coherent scaffolds with ultrafine filaments, the smallest being 817 ± 165 nm. These low diameter filaments were deposited to form box-structures with a periodicity of 100.6 ± 5.1 μm and a height of 80 μm (50 stacked filaments; 100 overlap at intersections). We also observed oriented crystalline regions within such ultrafine filaments after annealing at 55 °C. The scaffolds were printed upon NCO-sP(EO-stat-PO)-coated glass slide surfaces and withstood frequent liquid exchanges with negligible scaffold detachment for at least 10 days in vitro.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 10.1586/erd.12.4810.1586/erd.12.48 ↗
2. 10.1016/j.biomaterials.2012.04.05010.1016/j.biomaterials.2012.04.050 ↗
3. 10.1016/j.progpolymsci.2011.11.00710.1016/j.progpolymsci.2011.11.007 ↗
4. 10.1016/j.progpolymsci.2010.04.00210.1016/j.progpolymsci.2010.04.002 ↗
5. Reneker D H · Nanotechnology · 1996 · 7 · 21610.1088/0957-4484/7/3/009 ↗
6. 10.1039/C2BM00039C10.1039/C2BM00039C ↗
7. 10.1021/nl060270110.1021/nl0602701 ↗
8. 10.1021/la404704z10.1021/la404704z ↗
9. 10.1016/j.polymer.2009.01.02910.1016/j.polymer.2009.01.029 ↗
10. 10.1016/S0032-3861(01)00540-710.1016/S0032-3861(01)00540-7 ↗
11. 10.1021/bm060649h10.1021/bm060649h ↗
12. 10.1039/c3an36599a10.1039/c3an36599a ↗
13. 10.1098/rspa.1969.020510.1098/rspa.1969.0205 ↗
14. Farrugia B L · Biofabrication · 2013 · 510.1088/1758-5082/5/2/025001 ↗
15. 10.1002/adma.20110348210.1002/adma.201103482 ↗
16. 10.1002/pi.450910.1002/pi.4509 ↗
17. 10.1016/j.polymer.2007.09.03710.1016/j.polymer.2007.09.037 ↗
18. Wei C · J. Micromech. Microeng. · 2013 · 23
19. 10.1116/1.491438010.1116/1.4914380 ↗
20. 10.1016/j.msec.2014.07.03410.1016/j.msec.2014.07.034 ↗
21. 10.1002/asia.20100043610.1002/asia.201000436 ↗
22. 10.1016/j.polymer.2006.08.04210.1016/j.polymer.2006.08.042 ↗
23. 10.1089/ten.tea.2011.043010.1089/ten.tea.2011.0430 ↗
24. 10.1039/c3bm60150a10.1039/c3bm60150a ↗
25. 10.1089/ten.teb.2014.034710.1089/ten.teb.2014.0347 ↗
26. 10.1016/8756-3282(92)90364-310.1016/8756-3282(92)90364-3 ↗
27. 10.1021/la047439f10.1021/la047439f ↗
28. 10.1038/nmat290410.1038/nmat2904 ↗
29. 10.1089/ten.tec.2008.032410.1089/ten.tec.2008.0324 ↗
30. 10.1017/S002211200600250310.1017/S0022112006002503 ↗
31. 10.1103/PhysRevE.77.06621810.1103/PhysRevE.77.066218 ↗
32. 10.1103/PhysRevE.85.06620910.1103/PhysRevE.85.066209 ↗
33. 10.1016/j.polymer.2014.08.02410.1016/j.polymer.2014.08.024 ↗
34. 10.1021/ma034417b10.1021/ma034417b ↗
35. 10.1021/ma048635w10.1021/ma048635w ↗
36. 10.1016/j.jnnfm.2007.11.01110.1016/j.jnnfm.2007.11.011 ↗
37. 10.1016/j.polymer.2009.11.02510.1016/j.polymer.2009.11.025 ↗
38. Dalton P D · Biomed. Mater. · 2008 · 310.1088/1748-6041/3/3/034109 ↗