journal article·2019-10-01

High density cell seeding affects the rheology and printability of collagen bioinks

Nicole Diamantides, Caroline Dugopolski, Eric Blahut, Stephen Kennedy, Lawrence J Bonassar

Biofabrication· Volume 11· Issue 4
Publisher page

Abstract

Abstract An advantage of bioprinting is the ability to incorporate cells into the hydrogel bioink allowing for precise control over cell placement within a construct. Previous work found that the printability of collagen bioinks is highly dependent on their rheological properties. The effect of cell density on collagen rheological properties and, therefore, printability has not been assessed. Therefore, the objective of this study was to determine the effects of incorporating cells on the rheology and printability of collagen bioinks. Primary chondrocytes, at densities relevant to cartilage tissue engineering (up to 100 × 10 6 cells ml −1 ), were incorporated into 8 mg ml −1 collagen bioinks. Bioink rheological properties before, during, and after gelation as well as printability were assessed. Cell-laden printed constructs were also cultured for up to 14 d to assess longer-term cell behavior. The addition of cells resulted in an increase in the storage modulus and viscosity of the collagen before gelation. However, the storage modulus after gelation and the rate of gelation decreased with increasing cell density. Theoretical models were compared to the rheological data to suggest frameworks that could be used to predict the rheological properties of cell-laden bioinks. Printability testing showed that improved printability could be achieved with higher cell densities. Fourteen-day culture studies showed that the printing process had no adverse effects on the viability or function of printed cells. Overall, this study shows that collagen bioinks are conducive to bioprinting with a wide range of cell densities while maintaining high printability and chondrocyte viability and function.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Cell Image Analysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. 3D Bioprinting of spatially heterogeneous collagen constructs for cartilage tissue engineering10.1021/acsbiomaterials.6b00288 ↗
2. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs10.1002/adma.201305506 ↗
3. Directing the self-assembly of tumour spheroids by bioprinting cellular heterogeneous models within alginate/gelatin hydrogels10.1038/s41598-017-04691-9 ↗
4. Correlating rheological properties and printability of collagen bioinks: the effects of riboflavin photocrosslinking and pH10.1088/1758-5090/aa780f ↗
5. Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells10.1088/1758-5090/8/3/035020 ↗
6. Engineering alginate as bioink for bioprinting10.1016/j.actbio.2014.06.034 ↗
7. Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide10.18063/IJB.2016.02.007 ↗
8. Flow behavior prior to crosslinking: the need for precursor rheology for placement of hydrogels in medical applications and for 3D bioprinting10.1016/j.progpolymsci.2019.01.003 ↗
9. Evaluation of bioink printability for bioprinting applications10.1063/1.5053979 ↗
10. Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability10.1088/1758-5090/aa8dd8 ↗
11. Trends on physical understanding of bioink printability10.1007/s42242-019-00033-y ↗
12. The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology10.1088/1758-5090/7/4/045002 ↗
13. The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability10.1016/j.biomaterials.2013.09.078 ↗
14. Study of droplet formation process during drop-on-demand inkjetting of living cell-laden bioink10.1021/la501430x ↗
15. Marrow stromal cells embedded in alginate for repair of osteochondral defects10.1053/jars.2000.4827 ↗
16. Tissue-engineered growth of cartilage: the effect of varying the concentration of chondrocytes seeded onto synthetic polymer matrices10.1016/S0901-5027(05)80328-5 ↗
17. Injection molding of chondrocyte/alginate constructs in the shape of facial implants10.1002/1097-4636(20010615)55:4<503::AID-JBM1043>3.0.CO;2-S ↗
18. High density type I collagen gels for tissue engineering of whole menisci10.1016/j.actbio.2013.05.002 ↗
19. High-fidelity tissue engineering of patient-specific auricles for reconstruction of pediatric microtia and other auricular deformities ed X He10.1371/journal.pone.0056506 ↗
20. A thermoreversible, photocrosslinkable collagen bio-ink for free-form fabrication of scaffolds for regenerative medicine10.1142/S2339547817500091 ↗
21. A strategy to achieve highly porous/biocompatible macroscale blocks using a collagen/genipin bioink and an optimal 3D printing process10.1021/acsami.6b11669 ↗
22. Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering10.1016/J.MSEC.2017.09.002 ↗
23. Three-dimensional printing and angiogenesis: tailored agarose-type I collagen blends comprise three-dimensional printability and angiogenesis potential for tissue-engineered substitutes10.1089/ten.tec.2017.0234 ↗
24. Batchelor · 2002 · vol 76
25. The viscosity of a fluid containing small drops of another fluid10.1098/rspa.1932.0169 ↗
26. Christensen · 1991
27. Dense type I collagen matrices that support cellular remodeling and microfabrication for studies of tumor angiogenesis and vasculogenesis in vitro10.1016/j.biomaterials.2010.07.072 ↗
28. Fibrous nonlinear elasticity enables positive mechanical feedback between cells and ECMs10.1073/pnas.1613058113 ↗
29. A watershed-based algorithm to segment and classify cells in fluorescence microscopy images
30. Fluorometric assay of DNA in cartilage explants using Hoechst 3325810.1016/0003-2697(88)90532-5 ↗
31. Quantification of sulfated glycosaminoglycans in chondrocyte/alginate cultures, by use of 1,9-Dimethylmethylene blue10.1006/abio.1996.0502 ↗
32. Microbial transglutaminase induced controlled crosslinking of gelatin methacryloyl to tailor rheological properties for 3D printing10.1088/1758-5090/ab063f ↗
33. Development and quantitative characterization of the precursor rheology of hyaluronic acid hydrogels for bioprinting10.1016/j.actbio.2019.01.041 ↗
34. Yield stress determines bioprintability of hydrogels based on gelatin-methacryloyl and gellan gum for cartilage bioprinting10.1088/1758-5090/8/3/035003 ↗
35. Alterations in the Young’s modulus and volumetric properties of chondrocytes isolated from normal and osteoarthritic human cartilage10.1016/S0021-9290(98)00166-3 ↗
36. Freitas · 1999
37. Morphology of the bovine chondrocyte and of its cytoskeleton in isolation and in situ: are chondrocytes ubiquitously paired through the entire layer of articular cartilage?10.1093/rheumatology/ken341 ↗
38. Increased cell diameter precedes chondrocyte terminal differentiation, whereas cell-matrix attachment complex proteins appear constant10.1002/(SICI)1097-0185(199603)244:3<284::AID-AR2>3.0.CO;2-Z ↗
39. The number distribution of complex shear modulus of single cells measured by atomic force microscopy10.1016/j.ultramic.2009.03.008 ↗
40. Mechanical properties of cultured human airway smooth muscle cells from 0.05 to 0.4 Hz10.1152/jappl.2000.89.4.1619 ↗
41. Characterization of cell viability during bioprinting processes10.1002/biot.200900004 ↗
42. Bio-ink properties and printability for extrusion printing living cells10.1039/c3bm00012e ↗
43. Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool10.1089/ten.2006.0101 ↗
44. Sedimentation study of bioink containing living cells10.1063/1.5089245 ↗
45. Direct freeform fabrication of seeded hydrogels in arbitrary geometries10.1089/ten.2006.12.1325 ↗
46. Feasibility of bioprinting with a modified desktop 3D printer10.1089/ten.tec.2016.0286 ↗
47. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications10.1088/1758-5082/5/1/015001 ↗
48. Direct human cartilage repair using 3D bioprinting technology10.1089/ten.tea.2011.0543 ↗
49. Analyzing biological performance of 3D-printed, cell-impregnated hybrid constructs for cartilage tissue engineering10.1089/ten.tec.2015.0307 ↗