Advancement of 3D biofabrication in repairing and regeneration of cartilage defects
Source abstract
Abstract
Abstract Three-dimensional (3D) bioprinting, an additive manufacturing technology, fabricates biomimetic tissues that possess natural structure and function. It involves precise deposition of bioinks, including cells, and bioactive factors, on basis of computer-aided 3D models. Articular cartilage injuries, a common orthopedic issue. Current repair methods, for instance microfracture procedure (MF), autologous chondrocyte implantation (ACI), and osteochondral autologous transfer surgery have been applied in clinical practice. However, each procedure has inherent limitation. For instance, MF surgery associates with increased subchondral cyst formation and brittle subchondral bone. ACI procedure involves two surgeries, and associate with potential risks infection and delamination of the regenerated cartilage. In addition, chondrocyte implantation’s efficacy depends on the patient’s weight, joint pathology, gender-related histological changes of cartilage, and hormonal influences that affect treatment and prognosis. So far, it is a still a grand challenge for achieving a clinical satisfactory in repairing and regeneration of cartilage defects using conditional strategies. 3D biofabrication provide a potential to fabricate biomimetic articular cartilage construct that has shown promise in specific cartilage repair and regeneration of patients. This review reported the techniques of 3D bioprinting applied for cartilage repair, and analyzed their respective merits and demerits, and limitations in clinical application. A summary of commonly used bioinks has been provided, along with an outlook on the challenges and prospects faced by 3D bioprinting in the application of cartilage tissue repair. It provided an overall review of current development and promising application of 3D biofabrication technology in articular cartilage repair.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Osteoarthritis Treatment and Mechanisms · Knee injuries and reconstruction techniques · Total Knee Arthroplasty Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Prevalence of abnormalities in knees detected by MRI in adults without knee osteoarthritis: population based observational study (Framingham Osteoarthritis Study)10.1136/bmj.e5339 ↗
2. Tibial subchondral bone size and knee cartilage defects: relevance to knee osteoarthritis10.1016/j.joca.2007.01.003 ↗
3. Role of full‐thickness cartilage defects in knee osteoarthritis (OA) incidence and progression: data from the OA Initiative10.1002/jor.24140 ↗
4. Review: bioprinting: a beginning10.1089/ten.2006.12.631 ↗
5. Recent research progress of hydrogel on cartilage10.1016/j.eurpolymj.2024.113115 ↗
6. Combining innovative bioink and low cell density for the production of 3D-bioprinted cartilage substitutes: a pilot study10.1155/2020/2487072 ↗
7. Recent developments and current applications of organic nanomaterials in cartilage repair10.3390/bioengineering10010009 ↗
8. Biomimetic hydrogels designed for cartilage tissue engineering10.1039/D0BM01852J ↗
9. 3D bioprinting of hyaline articular cartilage: biopolymers, hydrogels, and bioinks10.3390/polym16010015 ↗
10. Application and development of 3D bioprinting in cartilage tissue engineering10.1039/D2BM00709F ↗
11. Experimental articular cartilage repair in the Göttingen minipig: the influence of multiple defects per knee10.1186/s40634-015-0031-3 ↗
12. Opportunities and challenges of translational 3D bioprinting10.1038/s41551-019-0471-7 ↗
13. Applications of 3D bioprinting in tissue engineering: advantages, deficiencies, improvements, and future perspectives10.1039/D1TB00172H ↗
14. A comprehensive review on droplet-based bioprinting: past, present and future10.1016/j.biomaterials.2016.06.012 ↗
15. Inkjet bioprinting of biomaterials10.1021/acs.chemrev.0c00008 ↗
16. Biofabrication of spatially organised tissues by directing the growth of cellular spheroids within 3D printed polymeric microchambers10.1016/j.biomaterials.2018.12.028 ↗
17. Development of 3D bioprinting: from printing methods to biomedical applications10.1016/j.ajps.2019.11.003 ↗
18. Recent advances in enabling technologies in 3D printing for precision medicine10.1002/adma.201902516 ↗
19. 3D bioprinting: from benches to translational applications10.1002/smll.201805510 ↗
20. Experimental study on repair of cartilage defects in the rabbits with GelMA-MSCs scaffold prepared by three-dimensional bioprinting10.18063/ijb.v9i2.662 ↗
21. Advances in 3D bioprinting
22. Photopolymerizable biomaterials and light-based 3D printing strategies for biomedical applications10.1021/acs.chemrev.9b00810 ↗
23. Photo-curing 3D printing technique and its challenges10.1016/j.bioactmat.2019.12.003 ↗
24. Desktop-stereolithography 3D printing of a radially oriented extracellular matrix/mesenchymal stem cell exosome bioink for osteochondral defect regeneration10.7150/thno.31017 ↗
25. Classification, processing, and applications of bioink and 3D bioprinting: a detailed review10.1016/j.ijbiomac.2023.123476 ↗
26. Three-dimensional bioprinting for bone and cartilage restoration in orthopaedic surgery10.5435/JAAOS-D-17-00632 ↗
27. An overview on materials and techniques in 3D bioprinting toward biomedical application10.1016/j.engreg.2020.12.001 ↗
28. 3D bioprinting for engineering complex tissues10.1016/j.biotechadv.2015.12.011 ↗
29. Effect of laser fluence in laser‐assisted direct writing of human colon cancer cell10.1108/13552541011034870 ↗
30. Towards artificial tissue models: past, present, and future of 3D bioprinting10.1088/1758-5090/8/1/014103 ↗
31. Bioprinting and its applications in tissue engineering and regenerative medicine10.1016/j.ijbiomac.2017.08.171 ↗
32. 3D bioprinting for biomedical devices and tissue engineering: a review of recent trends and advances10.1016/j.bioactmat.2017.11.008 ↗
33. Bioprinting functional tissues10.1016/j.actbio.2019.01.009 ↗
34. Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges10.1088/1758-5090/ab6034 ↗
35. Advances in three-dimensional bioprinting of bone: progress and challenges10.1002/term.2847 ↗
36. Visible light-induced 3D bioprinting technologies and corresponding bioink materials for tissue engineering: a review10.1016/j.eng.2020.05.021 ↗
37. 3D bioprinting and its in vivo applications10.1002/jbm.b.33826 ↗
38. Acoustic poration and dynamic healing of mammalian cell membranes during inkjet printing10.1021/acsbiomaterials.9b01635 ↗
39. Engineering zonal cartilage through bioprinting collagen type II hydrogel constructs with biomimetic chondrocyte density gradient10.1186/s12891-016-1130-8 ↗
40. 3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration10.1126/sciadv.aay1422 ↗
41. Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: an in vivo study10.1016/j.jare.2020.01.010 ↗
42. 3D bioprinting of hydrogel constructs with cell and material gradients for the regeneration of full-thickness chondral defect using a microfluidic printing head10.1088/1758-5090/ab2622 ↗
43. Advanced 3D-printing bioinks for articular cartilage repair10.18063/ijb.v8i3.511 ↗
44. Hydrogels and bioprinting in bone tissue engineering: creating artificial stem‐cell niches for in vitro models10.1002/adma.202301670 ↗
45. Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair10.1016/j.actbio.2020.10.025 ↗
46. Hydrogels for bioprinting: a systematic review of hydrogels synthesis, bioprinting parameters, and bioprinted structures behavior10.3389/fbioe.2020.00776 ↗
47. Redifferentiated chondrocytes in fibrin gel for the repair of articular cartilage lesions10.1177/0363546519857571 ↗
48. Controllable fabrication of hydroxybutyl chitosan/oxidized chondroitin sulfate hydrogels by 3D bioprinting technique for cartilage tissue engineering10.1088/1748-605X/aaf8ed ↗
49. Development of agarose–gelatin bioinks for extrusion-based bioprinting and cell encapsulation10.1088/1748-605X/ac759f ↗
50. Biocompatibility of hydrogel-based scaffolds for tissue engineering applications10.1016/j.biotechadv.2017.05.006 ↗
51. A review of the designs and prominent biomedical advances of natural and synthetic hydrogel formulations10.1016/j.eurpolymj.2017.01.027 ↗
52. Current concepts and perspectives for articular cartilage regeneration10.1186/s40634-022-00498-4 ↗
53. Review of alginate-based hydrogel bioprinting for application in tissue engineering10.1088/1758-5090/ab331e ↗
54. Construction and evaluation of alginate dialdehyde grafted RGD derivatives/polyvinyl alcohol/cellulose nanocrystals IPN composite hydrogels10.3390/molecules28186692 ↗
55. Development of chondrocyte‐laden alginate hydrogels with modulated microstructure and properties for cartilage regeneration10.1002/btpr.3322 ↗
56. Biomaterials for articular cartilage tissue engineering: learning from biology10.1016/j.actbio.2017.11.021 ↗
57. Photocrosslinked hyaluronic acid hydrogels: natural, biodegradable tissue engineering scaffolds10.1002/bit.10605 ↗
58. pH-triggered adhesiveness and cohesiveness of chondroitin sulfate-catechol biopolymer for biomedical applications10.3389/fbioe.2020.00712 ↗
59. Silk protein-based hydrogels: promising advanced materials for biomedical applications10.1016/j.actbio.2015.11.034 ↗
60. Overview of natural hydrogels for regenerative medicine applications10.1007/s10856-019-6318-7 ↗
61. Advanced hydrogels for the repair of cartilage defects and regeneration10.1016/j.bioactmat.2020.09.030 ↗
62. Adult stem cells and hydrogels for cartilage regeneration10.2174/1574888X12666170511142917 ↗
63. A unique high mechanical strength dialdehyde microfibrillated cellulose/gelatin composite hydrogel with a giant network structure10.1039/C6RA12517D ↗
64. 3D printed gelatin/hydroxyapatite scaffolds for stem cell chondrogenic differentiation and articular cartilage repair10.1039/D0BM02103B ↗
65. Natural biomaterials and their use as bioinks for printing tissues10.3390/bioengineering8020027 ↗
66. 3D bioprinting of gelatin-xanthan gum composite hydrogels for growth of human skin cells10.3390/ijms23010539 ↗
67. Cell-laden microengineered gelatin methacrylate hydrogels10.1016/j.biomaterials.2010.03.064 ↗
68. Recent advances in polysaccharide-based adsorbents for wastewater treatment10.1016/j.jclepro.2021.128221 ↗
69. 3D bioprinted integrated osteochondral scaffold-mediated repair of articular cartilage defects in the rabbit knee10.1007/s40846-019-00481-y ↗
70. 3D bioprinted alginate-silk-based smart cell-instructive scaffolds for dual differentiation of human mesenchymal stem cells10.1021/acsabm.2c00251 ↗
71. 3D bioprinting of shear-thinning hybrid bioinks with excellent bioactivity derived from gellan/alginate and thixotropic magnesium phosphate-based gels10.1039/D0TB00060D ↗
72. Highly concentrated alginate-gellan gum composites for 3D plotting of complex tissue engineering scaffolds10.3390/polym8050170 ↗
73. Is 3D printing promising for osteochondral tissue regeneration?10.1021/acsabm.3c00093 ↗
74. Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering10.1016/j.msec.2017.09.002 ↗
75. Role of hyaluronan in inflammatory effects on human articular chondrocytes10.1007/s10753-019-01043-9 ↗
76. Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs10.1016/j.actbio.2020.01.046 ↗
77. Generating adipose stem cell-laden hyaluronic acid-based scaffolds using 3D bioprinting via the double crosslinked strategy for chondrogenesis10.1016/j.msec.2021.112072 ↗
78. Recent advances in natural polymer-based drug delivery systems10.1016/j.reactfunctpolym.2020.104501 ↗
79. Silk fibroin/carboxymethyl chitosan hydrogel with tunable biomechanical properties has application potential as cartilage scaffold10.1016/j.ijbiomac.2019.06.245 ↗
80. 3D bioprinting of bone marrow mesenchymal stem cell-laden silk fibroin double network scaffolds for cartilage tissue repair10.1021/acs.bioconjchem.0c00298 ↗
81. Recent advance in delivery system and tissue engineering applications of chondroitin sulfate10.1016/j.carbpol.2019.115650 ↗
82. Aggrecan, the primary weight-bearing cartilage proteoglycan, has context-dependent, cell-directive properties in embryonic development and neurogenesis: aggrecan glycan side chain modifications convey interactive biodiversity10.3390/biom11010010 ↗
83. 3D bioprinting of biomimetic alginate/gelatin/chondroitin sulfate hydrogel nanocomposites for intrinsically chondrogenic differentiation of human mesenchymal stem cells10.1021/acs.biomac.3c01444 ↗
84. Injectable cell-laden hydrogels for tissue engineering: recent advances and future opportunities10.1089/ten.tea.2020.0341 ↗
85. 3D silk fiber construct embedded dual-layer PEG hydrogel for articular cartilage repair—in vitro assessment10.3389/fbioe.2021.653509 ↗
86. Synthesis of polystyrene latex via emulsion polymerization with poly(vinyl alcohol) as sole stabilizer10.1002/app.45111 ↗
87. Tribomechanical comparison between PVA hydrogels obtained using different processing conditions and human cartilage10.3390/ma12203413 ↗
88. A 3D printed biomimetic scaffold for cartilage regeneration with lubrication, load-bearing, and adhesive fixation properties10.1016/j.triboint.2024.109328 ↗
89. Dissolution–crystallization transition within a polymer hydrogel for a processable ultratough electrolyte10.1002/adma.201900248 ↗
90. Ionic hydrogel based on chitosan cross-linked with 6-phosphogluconic trisodium salt as a drug delivery system10.1021/acs.biomac.8b00108 ↗
91. Autonomous self-healing silk fibroin injectable hydrogels formed via surfactant-free hydrophobic association10.1021/acsami.9b19415 ↗
92. Temperature- and pH-responsive chitosan-based injectable hydrogels for bone tissue engineering10.1016/j.msec.2020.110862 ↗
93. Swelling/deswelling of anionic copolymer gels10.1016/0142-9612(95)91130-Q ↗
94. Hydrogels for biomedical applications10.1016/S0169-409X(01)00239-3 ↗
95. Cryogelation of xanthan10.1016/S0268-005X(03)00019-5 ↗
96. Controlled release from poly (vinyl alcohol) gels prepared by freezing-thawing processes10.1016/0168-3659(92)90178-T ↗
97. Characterization and drug delivery behaviour of starch-based hydrogels prepared via isostatic ultrahigh pressure10.1016/j.carbpol.2007.09.028 ↗
98. Use of radiation in the production of hydrogels10.1016/S0168-583X(01)00807-2 ↗
99. Chemical crosslinking of biopolymeric scaffolds: current knowledge and future directions of crosslinked engineered bone scaffolds10.1016/j.ijbiomac.2017.08.184 ↗
100. Photo‐crosslinking: an emerging chemical tool for investigating molecular networks in live cells10.1002/cbic.201900600 ↗