Bionic design of thin-walled bilinear tubes with excellent crashworthiness inspired by glass sponge structures
Source abstract
Abstract
Abstract In order to enhance energy absorption, this study draws inspiration from the diagonal bilinear robust square lattice structure found in deep-sea glass sponges, proposing a design for thin-walled structures with superior folding capabilities and high strength-to-weight ratio. Firstly, the crashworthiness of bionic glass sponge tube (BGSTO) is compared with that of equal-wall-thickness equal-mass four-X tube through both experiments and simulations, and it is obtained that the specific energy absorption of BGSTO is increased by 78.64%. And the crashworthiness of BGSTO is also most significant compared to that of multicellular tubes with the similar number of crystalline cells. Additionally, we found that the double-line spacing of the glass sponge can be freely adjusted without changing the material amount. Therefore, based on BGSTO, we designed two other double-line structures, BGSTA and BGSTB. Then with equal wall thickness and mass as a prerequisite, this study proceeds to design and compare the energy absorption properties of three bilinear thin-walled tubes in both axial and lateral cases. The deformation modes and crashworthiness of the three types of tubes with variable bilinear spacing (βO/A/B ) are comparatively analysed. The improved complex proportional assessment (COPRAS) synthesis decision is used to obtain that BGSTO exhibits superior crashworthiness over the remaining two kinds of tubes. Finally, a surrogate model is established to perform multi-objective optimization on the optimal bilinear configuration BGSTO selected by the COPRAS method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Review on lattice structures for energy absorption properties10.1016/j.compstruct.2022.116397 ↗
2. Isotropic octet-truss lattice structure design and anisotropy control strategies for implant application10.1016/j.matdes.2021.109595 ↗
3. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
4. Theoretical prediction and numerical simulation of honeycomb structures with various cell specifications under axial loading10.1007/s10999-011-9163-5 ↗
5. Theoretical prediction and crashworthiness optimization of multi-cell triangular tubes10.1016/j.tws.2014.03.019 ↗
6. Experimental and theoretical study on crashworthiness of star-shaped tubes under axial compression10.1016/j.tws.2018.06.002 ↗
7. On design of multi-cell tubes under axial and oblique impact loads10.1016/j.tws.2015.07.002 ↗
8. Crashworthiness analysis and optimization of fourier varying section tubes10.1016/j.ijnonlinmec.2017.03.001 ↗
9. On the crashworthiness performance of thin-walled energy absorbers: recent advances and future developments10.1016/j.tws.2017.05.018 ↗
10. Quasi-static axial compression of thin-walled circular aluminium tubes10.1016/S0020-7403(01)00031-5 ↗
11. Dynamic axial crushing of square tubes10.1016/0734-743X(84)90005-8 ↗
12. Axial crushing behaviors of multi-cell tubes with triangular lattices10.1016/j.ijimpeng.2013.08.007 ↗
13. Experimental and numerical investigation on crush resistance of polygonal columns and angle elements10.1016/j.tws.2012.04.006 ↗
14. Crashworthiness design of novel hierarchical hexagonal columns10.1016/j.compstruct.2018.03.099 ↗
15. Energy absorption of thin-walled tubes with pre-folded origami patterns: numerical simulation and experimental verification10.1016/j.tws.2016.02.007 ↗
16. Quasi-static impact of origami crash boxes with various profiles10.1016/j.tws.2019.04.028 ↗
17. Theoretical prediction of the progressive buckling and energy absorption of the sinusoidal corrugated tube subjected to axial crushing10.1016/j.compstruc.2017.05.001 ↗
18. Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns10.1016/j.tws.2015.05.002 ↗
19. Axial buckling modes and crashworthiness of circular tube with external linear gradient grooves10.1016/j.tws.2018.10.022 ↗
20. Low velocity impact of empty and foam filled circumferentially grooved thick-walled circular tubes10.1016/j.tws.2016.09.002 ↗
21. A new structure study: vibrational analyses of FGM convex-concave shells subjected to electro-thermal-mechanical loads surrounded by Pasternak foundation10.1016/j.euromechsol.2020.104168 ↗
22. Dynamical behaviors of conveying-fluid nanocomposite toroidal shell segments with piezoelectric layer in thermal environment using the Reddy’s third-order shear deformation shell theory10.1016/j.tws.2020.107204 ↗
23. Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections10.1016/j.tws.2013.10.005 ↗
24. Energy absorption of multi-cell stub columns under axial compression10.1016/j.tws.2013.03.014 ↗
25. Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators10.1016/j.matdes.2015.10.004 ↗
26. Crashworthiness optimization of a sandwich tube filled with CFRP sinusoidal corrugated board10.1016/j.ast.2022.108065 ↗
27. Experimental and numerical study on energy absorption performance of CFRP aluminum hybrid square tubes under axial loading10.1016/j.tws.2020.106948 ↗
28. Study on off-center impact behavior and damage characterization of carbon fiber reinforced aluminum laminate10.1016/j.compstruct.2022.116404 ↗
29. Effects of geometric configurations of corrugated cores on the local impact and planar compression of sandwich panels10.1016/j.compositesb.2018.08.130 ↗
30. Energy absorption performance and optimization of combination modes for carbon fiber reinforced plastics/aluminum honeycomb sandwich panels10.1002/pc.26356 ↗
31. Axial resistance and energy absorption of externally reinforced metal tubes10.1016/1359-8368(96)00002-9 ↗
32. Axial crushing theory of metal-FRP hybrid square tubes wrapped with antisymmetric angle-ply10.1016/j.tws.2019.01.005 ↗
33. On design of novel bionic bamboo tubes for multiple compression load cases10.1016/j.ijmecsci.2022.107067 ↗
34. Experimental study on bendability of thin-walled 6061-T4 tube under different bending velocities10.4028/www.scientific.net/AMM.184-185.196 ↗
35. Bionic design of thin-walled tubes inspired by the vascular structure of bamboo10.1016/j.tws.2023.110689 ↗
36. Crashworthiness analysis of bio-inspired fractal tree-like multi-cell circular tubes under axial crushing10.1016/j.tws.2021.108315 ↗
37. Bionic design and multi-objective optimization of thin-walled structures inspired by conchs10.3934/era.2023028 ↗
38. A review of recent research on bio-inspired structures and materials for energy absorption applications10.1016/j.compositesb.2019.107496 ↗
39. Performance analysis and multi-objective optimization of bionic dendritic furcal energy-absorbing structures for trains10.1016/j.ijmecsci.2023.108145 ↗
40. Structure design and multi-objective optimization of a novel crash box based on biomimetic structure10.1016/j.ijmecsci.2018.01.032 ↗
41. Design optimization of the bamboo-inspired foam-filled tube for high-speed train collision energy absorption10.1016/j.ijmecsci.2024.109128 ↗
42. Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure10.1016/j.conbuildmat.2018.03.043 ↗
43. Performance of bio-inspired Kagome truss core structures under compression and shear loading10.1016/j.compstruct.2014.07.036 ↗
44. Bio-inspired armor protective material systems for ballistic shock mitigation10.1016/j.matdes.2011.03.061 ↗
45. Bitzer · 1997
46. Mechanical properties and energy absorption of composite bio-inspired multi-cell tubes10.1016/j.tws.2022.110451 ↗
47. Synergistic effects of chiral morphology and reconfiguration in cattail leaves10.1016/S1672-6529(14)60153-0 ↗
48. Bending crashworthiness of bionic thin-walled structures inspired by sugar cane stalks10.1088/1742-6596/2412/1/012003 ↗
49. Crashworthiness analysis of bionic thin-walled tubes inspired by the evolution laws of plant stems10.1016/j.tws.2020.107081 ↗
50. Crashworthiness analysis and optimization of lotus-inspired bionic multi-cell circular tubes10.1080/15376494.2022.2098430 ↗
51. Crashworthiness analysis of the biomimetic lotus root lattice structure10.1016/j.ijmecsci.2023.108774 ↗
52. Crashworthiness and optimization of bionic sandwich cores under out-of-plane compression10.1016/j.ijmecsci.2023.108137 ↗
53. Study on energy absorption behavior of bionic tube inspired by feather shaft of bean goose10.1007/s12210-021-01045-6 ↗
54. The deformation mode and strengthening mechanism of compression in the beetle elytron plate10.1016/j.matdes.2017.06.014 ↗
55. Crashworthiness analysis of Dragonfly inspired tubes under multiple load cases10.1016/j.ijmecsci.2024.109085 ↗
56. Compressive properties of bio-inspired reticulated shell structures processed by selective laser melting10.1002/adem.201801168 ↗
57. Effects of architecture level on mechanical properties of hierarchical lattice materials10.1016/j.ijmecsci.2019.04.051 ↗
58. Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb10.1016/j.ijimpeng.2018.11.014 ↗
59. Investigation on crashworthiness and mechanism of a bionic antler-like gradient thin-walled structure10.1088/1748-3190/acad52 ↗
60. Simulation analysis of energy absorption properties of thin-wall tube based on horn structure
61. Mechanical performance of bio-inspired corrugated tubes with varying vertex configurations10.1016/j.ijmecsci.2019.105399 ↗
62. Analyzing nature’s protective design: the glyptodont body armor10.1016/j.jmbbm.2018.03.037 ↗
63. A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo10.1016/j.tws.2015.12.023 ↗
64. Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads10.1016/j.tws.2019.106333 ↗
65. Out-of-plane impact analysis for a bioinspired sinusoidal honeycomb10.1080/15376494.2021.1995547 ↗
66. Mechanically robust lattices inspired by deep-sea glass sponges10.1038/s41563-020-0798-1 ↗
67. Bionic design modification of non-convex multi-corner thin-walled columns for improving energy absorption through adding bulkheads10.1016/j.tws.2014.11.006 ↗
68. Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases10.1016/j.finel.2015.06.004 ↗