Finite element simulation of friction and adhesion attributed contact of bio-inspired gecko-mimetic PDMS micro-flaps with SiO2 spherical surface
Source abstract
Abstract
Abstract The remarkable tribological attributes of the gecko feet have grown much interest in the field of biomimetic tribology over the past two decades. It has been shown that the complexity of friction and adhesion phenomena made it difficult to transfer these exceptional properties into fully functional smart, dry, micro patterned adhesives. The latter, combined with the relative lack of literature on computational oriented studies on these phenomena, is the motive of the current work. Here, a 2D time-dependent finite element model of friction and adhesion attributed contact of polydimethysiloxane (PDMS) micro flaps with a smooth SiO2 spherical surface is presented. The model is tested through simulations concerning changes in the disc curvature, the flap density, as well as different disc mounting heights, representing the effect of preload. Furthermore, the effect of tribological parameters of adhesion and friction coefficient is discussed. Finally, the effect of the use of two hyperelastic material models was examined.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Force Microscopy Techniques and Applications · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Experiments on drag-reducing surfaces and their optimization with an adjustable geometry10.1017/S0022112096004673 ↗
2. Adhesive strength of amphibian skin secretions10.2307/1564965 ↗
3. Purity of the sacred lotus, or escape from contamination in biological surfaces10.1007/s004250050096 ↗
4. Biophysics: water-repellent legs of water striders10.1038/432036a ↗
5. Evidence for van der Waals adhesion in gecko setae10.1073/pnas.192252799 ↗
6. Adhesive force of a single gecko foot-hair10.1038/35015073 ↗
7. Modeling and design of biomimetic adhesives inspired by gecko foot-hairs
8. Evidence for self-cleaning in gecko setae10.1073/pnas.0408304102 ↗
9. Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements10.1073/pnas.0506328102 ↗
10. Optimization of biomimetic attachment system contacting with a rough surface10.1116/1.2435389 ↗
11. Adhesion analysis of multi-level hierarchical attachment system contacting with a rough surface10.1163/156856107779976097 ↗
12. Frictional adhesion: a new angle on gecko attachment10.1242/jeb.02486 ↗
13. Adhesion and friction in gecko toe attachment and detachment10.1073/pnas.0608841103 ↗
14. The effect of surface roughness on the adhesion of elastic plates with application to biological systems10.1063/1.1621854 ↗
15. Effects of contact shape on the scaling of biological attachments10.1098/rspa.2004.1326 ↗
16. A computational model for nanoscale adhesion between deformable solids and its application to gecko adhesion10.1163/016942410X507588 ↗
17. Multiscale modelling and simulation of the deformation and adhesion of a single gecko seta10.1080/10255840902802917 ↗
18. Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale10.1016/j.cma.2009.08.019 ↗
19. A geometrically exact finite beam element formulation for thin film adhesion and debonding10.1016/j.finel.2014.03.009 ↗
20. Design of gecko-inspired fibrillar surfaces with strong attachment and easy-removal properties: a numerical analysis of peel-zone10.1098/rsif.2012.0200 ↗
21. Static and dynamic friction of hierarchical surfaces10.1103/PhysRevE.94.063003 ↗
22. Hierarchical spring-block model for multiscale friction problems10.1021/acsbiomaterials.6b00709 ↗
23. Analysis and measurement of adhesive behavior for gecko‐inspired synthetic microwedge structure10.1002/admi.201900283 ↗
24. Contact with coupled adhesion and friction: computational framework, applications, and new insights
25. A representative volume element model for the adhesion between a micro-pillared surface and a compliant substrate10.1016/j.mechmat.2018.01.004 ↗
26. Patterned surfaces with pillars with controlled 3D tip geometry mimicking bioattachment devices10.1002/adma.200602476 ↗
27. Controllable anisotropic dry adhesion in vacuum: gecko inspired wedged surface fabricated with ultraprecision diamond cutting10.1002/adfm.201606576 ↗
28. Gecko‐inspired dry adhesive for robotic applications10.1002/adfm.201100493 ↗
29. Friction and adhesion of gecko-inspired PDMS flaps on rough surfaces10.1021/la301783q ↗
30. JKR theory for the stick–slip peeling and adhesion hysteresis of gecko mimetic patterned surfaces with a smooth glass surface10.1021/la403420f ↗
31. Stick–slip friction of gecko-mimetic flaps on smooth and rough surfaces10.1098/rsif.2014.1346 ↗
32. Waalbot II: adhesion recovery and improved performance of a climbing robot using fibrillar adhesives10.1177/0278364910382862 ↗
33. Whole body adhesion: hierarchical, directional and distributed control of adhesive forces for a climbing robot
34. Rational design and enhanced biocompatibility of a dry adhesive medical skin patch10.1002/adma.201101694 ↗
35. A biodegradable and biocompatible gecko-inspired tissue adhesive10.1073/pnas.0712117105 ↗
36. A legged anchoring mechanism for capsule endoscopes using micropatterned adhesives10.1109/TBME.2008.2002111 ↗
37. A nontransferring dry adhesive with hierarchical polymer nanohairs10.1016/j.jcis.2008.12.054 ↗
38. Deformation of PDMS membrane and microcantilever by a water droplet: comparison between Mooney–Rivlin and linear elastic constitutive models10.1016/j.jcis.2008.12.054 ↗
39. The evaluation of new multi-material human soft tissue simulants for sports impact surrogates10.1016/j.jmbbm.2014.09.018 ↗