Modeling and analysis of a passively adaptive soft gripper with the bio-inspired compliant mechanism
Source abstract
Abstract
Similar to the end effectors for traditional rigid robots, those for soft robots are essential as the interacting media between the robots and their environments. Inspired by the forelegs of climbing animals, a passively adaptive soft gripper (ASG), with six claws and a compliant mechanism, is developed for grasping objects and attaching to rough surfaces. The design method, grasp adaptability, form closure, and force equilibrium of the ASG are presented and analyzed in this paper. Due to the compliance at each claw root, the ASG possesses a high passive adaption to various objects. With sharp hooks, a form closure may be achieved easily when the ASG grasps rough objects with structured or unstructured shapes. The ASG grasping an object constitutes an under-actuated system, the solution to which is difficult to obtain. The Monte Carlo method is suggested to achieve effective solutions for such systems, and the in-hull rate is proposed to evaluate the difficulty of finding solution. Tests and experiments with the ASG grasping various objects have verified the adaptability and reliability of the ASG. The analytic and experimental results show that the novel ASG may be used as a universal gripper for soft manipulators and a prospective attaching device for biped climbing soft robots.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Soft Robotics and Applications · Robot Manipulation and Learning · Modular Robots and Swarm Intelligence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Universal robotic gripper based on the jamming of granular material10.1073/pnas.1003250107 ↗
2. A novel, variable stiffness robotic gripper based on integrated soft actuating and particle jamming10.1089/soro.2016.0027 ↗
3. Geckogripper: a soft, inflatable robotic gripper using gecko-inspired elastomer micro-fiber adhesives
4. Passive particle jamming and its stiffening of soft robotic grippers10.1109/tro.2016.2636899 ↗
5. Grasping without squeezing: design and modeling of shear-activated grippers10.1109/tro.2017.2776312 ↗
6. Optimal design of a soft robotic gripper for grasping unknown objects10.1089/soro.2017.0121 ↗
7. Robot hands
8. Birglen · 2007
9. Soft robotic grippers for biological sampling on deep reefs10.1089/soro.2015.0019 ↗
10. A low-cost lightweight climbing robot for the inspection of vertical surfaces10.1016/s0957-4158(00)00046-5 ↗
11. Climbing the walls [robots]10.1109/mra.2002.1160067 ↗
12. A climbing autonomous robot for inspection applications in 3d complex environments10.1017/s0263574799002258 ↗
13. A wall-climbing robot for labelling scale of oil tank’s volume10.1017/s0263574701003964 ↗
14. Catmill · 1985
15. Evidence for van der Waals adhesion in gecko setae10.1073/pnas.192252799 ↗
16. Big house lizard in the vertical and horizontal surfaces on the trot walking and joint angle observation10.1007/s11434-008-0150-7 ↗
17. SpinybotII: climbing hard walls with compliant microspines
18. Shady3d: a robot that climbs 3d trusses
19. Climbot: a bio-inspired modular biped climbing robot C system development, climbing gaits and experiments10.1115/1.4028683 ↗
20. Climbing strategy for a flexible tree climbing robotłtreebot10.1109/tro.2011.2162273 ↗
21. Scaling hard vertical surfaces with compliant microspine arrays10.1177/0278364906072511 ↗
22. Towards penetration-based clawed climbing
23. Spinybot II: climbing hard walls with compliant microspines
24. Rapid pole climbing with a quadrupedal robot
25. Biologically inspired climbing with a hexapedal robot10.1002/rob.20238 ↗
26. Design and motion planning of an autonomous climbing robot with claws10.1016/j.robot.2011.06.003 ↗
27. A wheeled wall-climbing robot with bio-inspired spine mechanisms10.1016/s1672-6529(14)60096-2 ↗
28. Design and experiment of a bioinspired wall-climbing robot using spiny grippers
29. A bio-inspired climbing robot with flexible pads and claws10.1007/s42235-018-0028-6 ↗
30. Soft composite hinge actuator and application to compliant robotic gripper10.1016/j.compositesb.2016.05.030 ↗
31. Deployable soft composite structures10.1038/srep20869 ↗
32. On the form-closure property of robotic grasping10.1016/s1474-6670(17)47318-6 ↗
33. A complete and efficient algorithm for searching 3d form-closure grasps in the discrete domain10.1109/tro.2004.829500 ↗
34. Murray · 1994
35. Structure and mechanics of the tarsal chain in the hornet, vespa crabro (hymenoptera: vespidae): implications on the attachment mechanism10.1016/j.asd.2003.10.003 ↗
36. Elasticity and movements of the cockroach tarsus in walking10.1007/s003590050374 ↗
37. Development of a bio-inspired soft gripper with claws
38. High strain rate deformation of martensitic niti shape memory alloy10.1016/s1359-6462(99)00058-5 ↗
39. Kinematic and force analysis of articulate hands
40. Examples of 3d grasp quality computations10.1109/ROBOT.1999.772531 ↗